LVS 负载均衡——直接路由模式DR

[root@localhost ~]# ifconfig eno16777728:0 192.168.200.253 netmask 255.255.255.0
#查看配置结果
[root@localhost ~]# ifconfig eno16777728:0 
eno16777728:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.200.253  netmask 255.255.255.0  broadcast 192.168.200.255
        ether 00:0c:29:f0:42:97  txqueuelen 1000  (Ethernet)

[root@localhost ~]# yum -y install ipvsadm
#查看安装结果
[root@localhost ~]# rpm -qa ipvsadm
ipvsadm-1.27-7.el7.x86_64

[root@localhost ~]#  ipvsadm -A -t 192.168.200.253:80 -s rr
[root@localhost ~]#  ipvsadm -a -t  192.168.200.254:80 -r 192.168.200.112:80 -g -w 1
[root@localhost ~]#  ipvsadm -a -t  192.168.200.253:80 -r 192.168.200.113:80 -g -w 1

[root@localhost ~]# ifconfig lo:0  192.168.200.253 netmask 255.255.255.255 

[root@localhost ~]# route add -host 192.168.200.253 dev lo:0
#将访问VIP的数据限制在本地以避免通信紊乱。

[root@localhost ~]# vim /etc/sysctl.conf
net.ipv4.conf.all.arp_ignore=1
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.default.arp_ignore = 1
net.ipv4.conf.default.arp_announce = 2
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
#启用参数
[root@localhost ~]# sysctl -p
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.default.arp_ignore = 1
net.ipv4.conf.default.arp_announce = 2
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2

[root@localhost ~]# yum -y install httpd
#开启httpd服务
[root@localhost ~]# systemctl start httpd

[root@localhost ~]# systemctl stop firewalld
[root@localhost ~]# setenforce 0
[root@localhost ~]# iptables -F

[root@localhost ~]# echo "111111111" > /var/www/html/index.html