标签：环境 when ifconf etc kernel nload ati lin modify
FAT 搭建的坑
1 先按照官方步骤进行，完成后进行如下步骤
2 修改
- move /firmadyne into /firmware-analysis-toolkit
- navigate to the Firmadyne folder and execute "sudo ./download.sh" (seems like I missed this step when setting up Firmadyne)
- move fat.py and reset.py into Firmadyne folder
- modify the firmadyne_path (in fat.py) and FIRMWARE_DIR (in firmadyne.config) to the current path of Firmadyne.
mipsel-linux-gcc 编译大端程序
mipsel-linux-gcc demo.c -EB -c -static -o demo1
mipsel-linux-ld demo1 -EB -o demo
若是编译成共享库的话，两步都要加上 -shared 参数
qemu system 环境搭建，网络配置
1 下载
2 配置网络
sudo tunctl -t tap0
sudo ifconfig tap0 10.0.0.1/24
3 进入虚拟机配置网络
sudo qemu-system-mips -M malta -kernel vmlinux-3.2.0-4-4kc-malta -hda debian_wheezy_mips_standard.qcow2 -append "root=/dev/sda1 console=tty0" -netdev tap,id=tapnet,ifname=tap0,script=no -device rtl8139,netdev=tapnet -nographic
ifconfig eth0 10.0.0.2/24 up
4 进入虚拟机后
mount -o bind /dev ./squashfs-root/dev/
mount -t proc /proc/ ./squashfs-root/proc/
chroot squashfs-root sh
然后分析程序，手动启动程序
qemu system 网络配置虚拟机通外网
1
sudo tunctl -t br0
sudo ifconfig br0 10.0.0.1/24
sudo brctl addbr virbr0
sudo brctl addif virbr0 ens33
sudo brctl addif virbr0 br0
2 在/etc/network/interfaces 加入
auto virbr0
iface virbr0 inet dhcp
bridge_ports eth0
3 启动虚拟机
sudo qemu-system-mips -M malta -kernel vmlinux-3.2.0-4-4kc-malta -hda debian_wheezy_mips_standard.qcow2 -append "root=/dev/sda1 console=tty0" -netdev tap,id=tapnet,ifname=br0,script=no -device rtl8139,netdev=tapnet -nographic
关于路由器漏洞利用，qemu环境搭建，网络配置的总结
标签：环境 when ifconf etc kernel nload ati lin modify
原文地址：https://www.cnblogs.com/junmoxiao/p/11768800.html
