部署带有验证的es集群及创建快照

标签：mes   pcb   unit   can   output   打开文件   管理   telnet   nap   

1?? 环境准备
① 关闭防火墙、selinux
sed -i ‘s/SELINUX=enforcing/SELINUX=disabled/g‘ /etc/selinux/config
setenforce 0
systemctl stop firewalld
systemctl disable firewalld

② 修改系统最大打开文件数和进程数
cat <<EOF >> /etc/security/limits.conf
* soft nofile 65536
* hard nofile 65536
* soft nproc 20480
* hard nproc 40960
EOF
echo vm.max_map_count=655360 >> /etc/sysctl.conf
sysctl -p

③ 配置主机名及互信
④ 配置yum源
yum -y install wget vim git wget unzip telnet lsof
cd /etc/yum.repos.d/
mkdir backup
mv *.repo backup
# 阿里云yun源
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
# epel源
yum -y install epel-release
yum clean all
yum makecache
# elk源
cat <<EOF > /etc/yum.repos.d/elk.repo
[elk]
name=elk
baseurl=https://mirrors.tuna.tsinghua.edu.cn/elasticstack/yum/elastic-7.x/
enable=1
gpgcheck=0
EOF

⑤ 源码安装java # 此步骤可忽略，高版本的es集成了java环境
mkdir -p /data/apps/
tar -xf jdk-8u11-linux-x64.tar.gz
mv jdk1.8.0_11/ jdk
cat <<EOF > /etc/profile.d/jdk.sh
JAVA_HOME=/data/apps/jdk
CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar
PATH=$JAVA_HOME/bin:$PATH
export JAVA_HOME CLASSPATH PATH
EOF
source /etc/profile

2?? 安装elasticsearch集群

① 下载
wget https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-7.3.0-linux-x86_64.tar.gz
tar -xf elasticsearch-7.3.0-linux-x86_64.tar.gz
mv elasticsearch-7.3.0 /data/apps/elasticsearch
cd /data/apps
useradd es
chown -R es.es elasticsearch
su - es
mkdir -pv /home/es/{data,logs}/es

② 配置 config/elaticsearch.yml
cluster.name: dev-es # 集群名称
node.name: es-node1 # 节点名称
path.data: /home/es/data/es1，/home/es/data/es2 # es索引库的数据存储目录
path.logs: /home/es/logs/es # es进程启动后，对应的日志信息存放目录
path.repo: /data/es_bk # 备份文件
network.host: 0.0.0.0
# 允许跨域请求
http.cors.enabled: true
http.cors.allow-origin: "*"
http.cors.allow-credentials: true
#discovery.seed_hosts: ["es-node1"]
cluster.initial_master_nodes: ["es-node1"]
transport.tcp.port: 9300 # 节点间交互的tcp端口，默认9300
discovery.zen.minimum_master_nodes: 2 # 防脑裂，集群中至少又2台节点可用，否则集群就瘫痪。计算公式： 节点数/2+1
discovery.zen.ping.unicast.hosts: [‘es-node1‘,‘es-node2‘,‘es-node3‘] #
xpack.security.enabled: true # 开启auth认证
xpack.security.transport.ssl.enabled: true
xpack.security.transport.ssl.verification_mode: certificate
xpack.security.transport.ssl.keystore.path: certs/elastic-certificates.p12
xpack.security.transport.ssl.truststore.path: certs/elastic-certificates.p12
http.cors.allow-headers: Authorization,X-Requested-With,Content-Length,Content-Type

*** 调整es堆内存 建议调整为物理内存的50% 但不要超过32G
vim jvm.options
-Xms30g
-Xmx30g

*** es 参数调优
index.merge.scheduler.max_thread_count:1 # 索引 merge 最大线程数
indices.memory.index_buffer_size:30% # 内存
index.translog.durability:async # 这个可以异步写硬盘，增大写的速度
index.translog.sync_interval:120s #translog 间隔时间
discovery.zen.ping_timeout:120s # 心跳超时时间
discovery.zen.fd.ping_interval:120s # 节点检测时间
discovery.zen.fd.ping_timeout:120s #ping 超时时间
discovery.zen.fd.ping_retries:6 # 心跳重试次数
thread_pool.bulk.size:20 # 写入线程个数 由于我们查询线程都是在代码里设定好的，我这里只调节了写入的线程数
thread_pool.bulk.queue_size:1000 # 写入线程队列大小
index.refresh_interval:300s #index 刷新间隔
bootstrap.memory_lock: true

③ 启动
#Running as a daemon
./bin/elasticsearch -d -p pid_file
# shut down Elasticsearch
pkill -F pid_file
# Checking that Elaelasticsearch is running
curl -XGET ‘http://127.0.0.1:9200‘

**** 使用systemd 管理es集群
vim /usr/lib/systemd/system/es.service
[Unit]
Description=Elasticsearch
Documentation=http://www.elastic.co
Wants=network-online.target
After=network-online.target

[Service]
Restart=always
Type=simple
PrivateTmp=true
Environment=ES_HOME=/data/apps/elasticsearch-7.3.0
Environment=ES_PATH_CONF=/data/apps/elasticsearch-7.3.0/config
Environment=PID_DIR=/data/apps/elasticsearch-7.3.0
Environment=ES_SD_NOTIFY=true
#EnvironmentFile=/etc/sysconfig/elasticsearch

WorkingDirectory=/data/apps/elasticsearch-7.3.0

User=es
Group=es

ExecStart=/data/apps/elasticsearch-7.3.0/bin/elasticsearch -p ${PID_DIR}/elasticsearch.pid --quiet

# StandardOutput is configured to redirect to journalctl since
# some error messages may be logged in standard output before
# elasticsearch logging system is initialized. Elasticsearch
# stores its logs in /var/log/elasticsearch and does not use
# journalctl by default. If you also want to enable journalctl
# logging, you can simply remove the "quiet" option from ExecStart.
StandardOutput=journal
StandardError=inherit

# Specifies the maximum file descriptor number that can be opened by this process
LimitNOFILE=65535

# Specifies the maximum number of processes
LimitNPROC=20480

LimitMEMLOCK=infinity

# Specifies the maximum size of virtual memory
LimitAS=infinity

# Specifies the maximum file size
LimitFSIZE=infinity

# Disable timeout logic and wait until process is stopped
TimeoutStopSec=0

# SIGTERM signal is used to stop the Java process
KillSignal=SIGTERM

# Send the signal only to the JVM rather than its control group
KillMode=process

# Java process is never killed
SendSIGKILL=no

# When a JVM receives a SIGTERM signal it exits with code 143
SuccessExitStatus=143

[Install]
WantedBy=multi-user.target

# Built for ${project.name}-${project.version} (${project.name})

systemctl daemon-reload
systemctl enable es
systemctl start es

# 配置tls和身份验证

1?? 创建证书文件（master上执行）
./bin/elasticsearch-certutil ca # 一直回车
./bin/elasticsearch-certutil cert --ca elastic-stack-ca.p12 # 一直回车

mkdir config/certs
mv elastic-*.p12 config/certs/
chown -R es.es config/certs/

2?? 修改配置并重启
cat >> config/elasticsearch.yml <<EOF
xpack.security.enabled: true
xpack.security.transport.ssl.enabled: true
xpack.security.transport.ssl.verification_mode: certificate
xpack.security.transport.ssl.keystore.path: certs/elastic-certificates.p12
xpack.security.transport.ssl.truststore.path: certs/elastic-certificates.p12
EOF

3?? 生成客户端证书
bin/elasticsearch-certutil cert --ca \
config/certs/elastic-stack-ca.p12 \
-name "CN=esuser,OU=dev,DC=weqhealth,DC=com"
#回车
client.p12
# 回车

mv client.p12 config/certs/
cd config/certs/
openssl pkcs12 -in client.p12 -nocerts -nodes > client-key.pem
openssl pkcs12 -in client.p12 -clcerts -nokeys > client.crt
openssl pkcs12 -in client.p12 -cacerts -nokeys -chain > client-ca.crt

chown es.es client*

4?? 设置默认密码
bin/elasticsearch-setup-passwords interactive # auto

Changed password for user apm_system
PASSWORD apm_system = ktfrkXe3aA2qz1UgLoBR

Changed password for user kibana
PASSWORD kibana = HQuZIBunJgTRuAnXdXga

Changed password for user logstash_system
PASSWORD logstash_system = BclvBlUd378SSBlJ832x

Changed password for user beats_system
PASSWORD beats_system = gYiAWtiHdMBMsY8Nj86L

Changed password for user remote_monitoring_user
PASSWORD remote_monitoring_user = jaF3jzw08GKFuVBh78Ri

Changed password for user elastic
PASSWORD elastic = IIti4qJDEi6X2LX2iNmd

# 安全重启es

① 禁用分片规则
PUT _cluster/settings
{
"persistent": {
"cluster.routing.allocation.enable": "primaries"
}
}
② 重启
③ 开启分片
PUT _cluster/settings
{
"persistent": {
"cluster.routing.allocation.enable": null
}
}

# 查看集群状况
http://192.168.27.157:9200/_cat/nodes?
http://192.168.27.157:9100/?auth_user=elastic&auth_password=IIti4qJDEi6X2LX2iNmd

====> ES-Head Plugin 方便对ES进行各种操作的客户端工具
https://github.com/mobz/elasticsearch-head
*** 插件不能安装在es的plugin目录下
git clone git://github.com/mobz/elasticsearch-head.git
cd elasticsearch-head
yum -y install nodejs npm
npm init -f # 解决 npm WARN enoent ENOENT: no such file or directory, open ‘/soft/elasticsearch/plugins/package.json‘
npm install -g grunt-cli
npm install grunt --save
npm install grunt-contrib-clean
npm install grunt-contrib-concat
npm install grunt-contrib-watch
npm install grunt-contrib-connect
npm install grunt-contrib-copy
npm install phantomjs-prebuilt@2.1.14 --ignore-scripts
npm install grunt-contrib-jasmine

# elasticsearch-head 目录下的 Gruntfile.js 文件，在 options 属性内增加 hostname，设置为 0.0.0.0
connect: {
server: {
options: {
hostname: ‘0.0.0.0‘,
port: 9100,
base: ‘.‘,
keepalive: true
}
}
}
# 修改elasticsearch-head/_site/app.js
this.base_uri = this.config.base_uri || this.prefs.get("app-base_uri") || "http://node-1:9200";

# 启动elasticsearch-head
nohup grunt server > /dev/null 2>&1 &

====> kibana Plugin 读取es集群中索引库的type信息，并使用可视化的方式呈现
wget https://artifacts.elastic.co/downloads/kibana/kibana-7.3.2-linux-x86_64.tar.gz
shasum -a 512 kibana-7.3.2-linux-x86_64.tar.gz
tar -xzf kibana-7.3.2-linux-x86_64.tar.gz
mv kibana-7.3.2-linux-x86_64 kibana
mv kibana /data/apps/es-plugin
cd /data/apps/es-plugin/kibana

vim config/kibana.yml
i18n.locale: "zh-CN"
server.host: "192.168.27.157" //监听IP地址，建议内网ip
#elasticsearch.url: "http://192.168.27.157:9200" //elasticsearch连接kibana的URL，可任选一个节点
elasticsearch.username: "kibana"
elasticsearch.password: "HQuZIBunJgTRuAnXdXga"

server.port: 5601 //监听端口
server.host: "192.168.14.239" //监听IP地址，建议内网ip
elasticsearch.url: "http://192.168.14.239:9200" //elasticsearch连接kibana的URL，也可以填写192.168.1.32，因为它们是一个集群

useradd -M kibana
chown -r kibana.kibana kibana
su - kibana
nohup ./bin/kibana &

es性能优化
提升段合并速度（固态盘）

PUT /_cluster/settings
{
"persistent" : {
"indices.store.throttle.max_bytes_per_sec" : "100mb"
}
}

# 部署nfs共享存储
服务端：
yum -y install nfs-utils
systemctl enable rpcbind
systemctl enable nfs
systemctl start rpcbind
systemctl start nfs

#firewall-cmd --zone=public --permanet --add-service={rpc-bind,mountd,nfs}
#firewall-cmd --reload

echo ‘/path/ 192.168.1.0/24(rw,sync,root_squash,no_all_squash)‘ > /etc/exports
systemctl restart nfs

# 查看
showmount -e localhost

客户端
yum -y install nfs-utils
systemctl enable rpcbind
systemctl restart rpcbind
查看服务端共享目录
showmount -e 192.168.27.158
# 挂载
mount -t nfs 192.168.27.158:/path /path
# 查看
nount

# 自动挂载
vim /etc/fstab
192.168.27.158:/path /path nfs defaults 0 0
systemctl daemon-reload

# 创建仓库
curl -XPUT -u elastic:IIti4qJDEi6X2LX2iNmd http://192.168.27.157:9200/_snapshot/my_backup -H ‘Content-Type: application/json‘ -d ‘{"type": "fs", "settings": {"location": "/data/es_bk", "compress": true}}‘
# 创建快照
curl -XPUT -u elastic:IIti4qJDEi6X2LX2iNmd http://192.168.27.157:9200/_snapshot/my_backup/snapshot_1?wait_for_completion=true
# 恢复快照
curl -XPOST http://127.0.0.1:9200/_snapshot/my_backup/snapshot_1/_restore

# 查看仓库
curl -XGET -u elastic:IIti4qJDEi6X2LX2iNmd "http://192.168.27.157:9200/_snapshot/my_backup?pretty"
# 查看快照
curl -XGET -u elastic:IIti4qJDEi6X2LX2iNmd "http://192.168.27.157:9200/_snapshot/my_backup/_all?pretty"
# 删除快照
curl -XDELETE -u elastic:IIti4qJDEi6X2LX2iNmd "http://192.168.27.157:9200/_snapshot/my_backup/snapshot_1"

部署带有验证的es集群及创建快照

标签：mes   pcb   unit   can   output   打开文件   管理   telnet   nap   

原文地址：https://www.cnblogs.com/ray-mmss/p/12127383.html