标签：stat 并保存 tar 直接 min getc sonar 多线程 request
服务端的测试，大多数内容都围绕着接口展开。对于接口测试，无非也是功能、自动化、性能测试为主，偶然想到一个问题，如果能写一个用例，在功能、自动化、性能三者的测试场景中重复使用，肯定能省去非常多的时间。
总体思路跟之前的接口和性能框架一样，通过总的测试项目中把接口功能封装好，留出来测试参数。功能测试就写方法调用然后人肉检查，自动化的话把接口响应拿出来，然后验证各种数据，性能直接使用性能框架直接调用该方法即可。
花了点时间，做了一个Demo，分享给大家。
这是一个简易的接口请求方法，其中main方法里面是功能测试执行代码，用例是文档形式，这里就不写了：
public class Headgear extends NajmBase {
public Headgear(NajmBase najmBase) {
this.loginKey = najmBase.loginKey;
this.args = najmBase.args;
this.user_id = najmBase.user_id;
}
private static NajmBase base = NajmBase.getBase(0);
public static Headgear drive = new Headgear(base);
/**
* 当前正在使用的头套
*/
public int usingHeadgearId;
// public JSONObject headgearInfo = new JSONObject();
public Map<Integer, Long> headgearInfo = new HashMap<>();
public static void main(String[] args) {
// NajmBase.getUserBalance(base.user_id);
// int type = 1, id = 36, packageId = 60, num = 1, price = 1;
// NajmBase base1 = new NajmBase(V580User.getUserName(0));
// Headgear headgear = new Headgear();
// headgear.switchHeadgear(34);
// output(headgear.getHeadgearInfo());
// output(headgear.getUsingHeadgearId());
// output(base1.loginResponse);
// drive.getAllHeadgear();
// new MallBase(base).buy(type, id, packageId, num, price);
// drive.getUserHeadgearInfo();
// NajmBase.getUserBalance(base.user_id);
// drive.getUserHeadgearInfo();
// drive.getOnsaleHeadgear();
int times = 0;
while (true) {
times++;
int type = 1, id = getRandomInt(2) == 1 ? 34 : 36, packageId = id == 34 ? 56 : 60, num = 1, price = 1;
long deadtime1 = drive.getHeadgearInfo().get(id);
Verify verify = new Verify(new MallBase(base).buy(type, id, packageId, num, price));
drive.getUserHeadgearInfo();
long deadtime2 = drive.getHeadgearInfo().get(id);
if (deadtime2 - deadtime1 != DAY) break;
}
output("一共进行了：" + times);
// output(drive.getHeadgearInfo());
// output(drive.usingHeadgear);
// output(drive.loginKey);
// output(drive.args);
// output(base.loginResponse.getJSONObject(DATAINFO).getJSONObject("headGear").getInt("id"));
testOver();
}
/**
* 获取所有头套信息，包括下架的
*
* @return
*/
public JSONObject getAllHeadgear() {
String url = HOST + HeadgearApiPath.GET_ALL_HEADGEAR;
HttpGet httpGet = getHttpGet(url);
JSONObject response = getHttpResponseEntityByJson(httpGet);
output(response);
return response;
}
/**
* 用户切换头套接口
*
* @param hid
* @return
*/
public JSONObject switchHeadgear(int hid) {
String url = HOST + HeadgearApiPath.SWITCH_HEADGEAR + hid + changeJsonToArguments(args);
HttpPost httpPost = getHttpPost(url);
JSONObject response = getHttpResponseEntityByJson(httpPost);
// output(response);
return response;
}
/**
* 获取用户头套信息
*
* @return
*/
public JSONObject getUserHeadgearInfo() {
sleep(1);
String url = HOST + HeadgearApiPath.GET_USER_HEADGEAR;
JSONObject response = getHttpResponseEntityByJson(getHttpGet(url, args));
output(response);
if (isRightResponse(response)) {
headgearInfo.clear();
JSONArray jsonArray = response.getJSONArray(DATAINFO);
jsonArray.forEach(json -> {
JSONObject jsonObject = JSONObject.fromObject(json.toString()) ;
String name = jsonObject.getString("name") ;
long deadTime = jsonObject.getLong("deadlineTime") ;
int headgearId = jsonObject.getInt("goodId") ;
int use = jsonObject.getInt("isUse") ;
if (use == 1) usingHeadgearId = headgearId;
headgearInfo.put(headgearId, deadTime);
output(name, headgearId, getTimeByTimestamp(deadTime));
} );
}
return response;
}
/**
* 获取在售的头套的列表
*
* @return
*/
public JSONObject getOnsaleHeadgear() {
String url = HOST + HeadgearApiPath.GET_ONSALE_HEADGEAR;
JSONObject response = getHttpResponseEntityByJson(getHttpGet(url, args));
output(response);
return response;
}
public int getUsingHeadgearId() {
getUserHeadgearInfo();
return usingHeadgearId;
}
public Map<Integer, Long> getHeadgearInfo() {
getUserHeadgearInfo();
return headgearInfo;
}
}下面是基于该功能的自动化测试用例，main方法里面是调试用例的过程，执行用例的方法在之前的文章写过，利用反射去记录用例信息和执行测试用例，并保存测试结果，输出测试报告，异常预警等等：
/**
* 用户0-10
*/
public class HeadgearCase extends SourceCode {
static HeadgearCase headgearCase = new HeadgearCase();
static NajmBase base = new NajmBase(V580User.getUserName(0));
static Headgear drive = new Headgear(base);
public static void main(String[] args) {
// headgearCase.testDemo001();
// headgearCase.testDemo002();
// headgearCase.testDemo003();
// headgearCase.testDemo004();
headgearCase.testDemo005();
// headgearCase.testDemo006();
ApiLibrary.testOver();
}
/**
* 获取所有头套信息用例
*/
public void testDemo001() {
String label = "获取所有头套信息用例" + TAB + Thread.currentThread().getStackTrace()[1];
Verify verify = new Verify(drive.getAllHeadgear());
JSONObject result = new JSONObject();
result.put("状态码为0", verify.isRight());
result.put("包含数组", verify.isArray("heads"));
result.put("包含已下架的头套", verify.isContains("自动化专用3"));
result.put("包含正在出售的头套", verify.isContains("自动化专用1"));
MySqlTest.saveTestResult(label, result);
}
/**
* 获取在售的头套用例
*/
public void testDemo002() {
String label = "获取在售的头套用例" + TAB + Thread.currentThread().getStackTrace()[1];
Verify verify = new Verify(drive.getOnsaleHeadgear());
JSONObject result = new JSONObject();
result.put("状态码为0", verify.isRight());
result.put("包含数组", verify.isArray("dataInfo"));
result.put("不包含已下架的头套", !verify.isContains("自动化专用3"));
result.put("包含正在出售的头套", verify.isContains("自动化专用1"));
result.put("包含描述信息", verify.isContains("测试10天"));
MySqlTest.saveTestResult(label, result);
}
/**
* 获取用户头套信息用例
*/
public void testDemo003() {
String label = "获取用户头套信息用例" + TAB + Thread.currentThread().getStackTrace()[1];
Verify verify = new Verify(drive.getUserHeadgearInfo());
JSONObject result = new JSONObject();
result.put("状态码为0", verify.isRight());
result.put("用户头套正常", verify.isContains("自动化专用1"));
result.put("用户佩戴正常", verify.isContains("\"isUse\":1"));
result.put("头套套餐正常", verify.isContains("测试1天"));
MySqlTest.saveTestResult(label, result);
}
/**
* 余额不足购买用例
*/
public void testDemo004() {
String label = "余额不足购买用例" + TAB + Thread.currentThread().getStackTrace()[1];
NajmBase base = new NajmBase(V580User.getUserName(1));
int type = 1, id = 36, packageId = 60, num = 1, price = 1;
Verify verify = new Verify(new MallBase(base).buy(type, id, packageId, num, price));
JSONObject result = new JSONObject();
result.put("状态码为35", 35 == verify.getCode());
MySqlTest.saveTestResult(label, result);
}
/**
* 正常购买用例
*/
public void testDemo005() {
String label = "正常购买用例" + TAB + Thread.currentThread().getStackTrace()[1];
int type = 1, id = getRandomInt(2) == 1 ? 34 : 36, packageId = id == 34 ? 56 : 60, num = 1, price = 1;
int balance = NajmBase.getUserBalance(drive.user_id);
long deadtime1 = drive.getHeadgearInfo().get(id);
Verify verify = new Verify(new MallBase(base).buy(type, id, packageId, num, price));
drive.getUserHeadgearInfo();
long deadtime2 = drive.getHeadgearInfo().get(id);
int balance1 = NajmBase.getUserBalance(drive.user_id);
JSONObject result = new JSONObject();
result.put("状态码为0", verify.isRight());
result.put("截止日期正确", (deadtime2 + EMPTY).equals(verify.getValue("deadlineTime")));
result.put("头套日期增加正常", deadtime2 - deadtime1 == DAY);
result.put("用户余额减少正常", balance - balance1 == 1);
MySqlTest.saveTestResult(label, result);
}
/**
* 用户切换头套用例
*/
public void testDemo006() {
String label = "用户切换头套用例" + TAB + Thread.currentThread().getStackTrace()[1];
drive.getAllHeadgear();
int id1 = drive.getUsingHeadgearId() == 34 ? 36 : 34;
Verify verify = new Verify(drive.switchHeadgear(id1));
int id2 = drive.getUsingHeadgearId();
JSONObject result = new JSONObject();
result.put("状态码为0", verify.isRight());
result.put("头套切换成功", id1 == id2);
MySqlTest.saveTestResult(label, result);
}
}下面是一个针对其中某个功能的性能测试用例（测试用例分两种，一类是HTTP单次请求的，我才用了获取请求的HttpRequestBase对象然后去重新发送并发请求，一类是多接口或者非HTTP请求，如dubbo，mysql，redis，消息队列等等，直接调用的方法进行压测）：
简单HTTP请求：
class CancelReason extends OkayBase{
public static void main(String[] args) {
def argsUtil = new ArgsUtil(args)
def thread = argsUtil.getIntOrdefault(0, 2)
def times = argsUtil.getIntOrdefault(1, 5)
def base = getBase()
Headgear drive = new Headgear(base);
drive.getAllHeadgear()
def request = FanLibrary.getLastRequest()
def timesthread = new RequestThreadTimes(request, times)
new Concurrent(timesthread, thread,"获取所有头套,内容流转二期压测接口").start()
allOver()
}
}非简单HTTP请求的请参考之前写过的性能测试框架Demo：性能测试框架第二版。这类方法写起来比较简单，使用范围很高，但是需要根据不同的业务需求解决多线程数据和对象的安全问题。
整个项目放在git上，功能测试在本地，自动化项目和性能项目在服务器，采用Groovy脚本运行，也可以在本地调试。自动化项目采取定时或者间隔固定时间自动运行，性能项目收到输入命令groovy filename.groovy来运行。
标签：stat 并保存 tar 直接 min getc sonar 多线程 request
原文地址：https://www.cnblogs.com/FunTester/p/12151542.html
