码迷，mamicode.com
首页 > 其他好文 > 详细

Ansible命令介绍之ansible

时间：2020-03-08 21:55:38      阅读：84      评论：0      收藏：0      [点我收藏+]

标签：目录   pretty   persist   创建目录   地址   www   地方   参考   temp   

前言

官方介绍：针对一组主机定义并运行单个任务“剧本”工具；个人理解ansible 是Ansible-hoc功能的程序入口，即简单临时命令；

 

命令格式

ansible [group|host] [options]

# group：组名，可以使用all来表示所有组与主机
# host：主机名或者主机地址，多主机用逗号隔开
# options：ansible程序选项

 

选项

技术图片

 

常用实例

指定模块来进行操作远程主机

[root@k8s-master01 ~]# ansible 192.168.10.170 -m ping
192.168.10.170 | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python"
    }, 
    "changed": false, 
    "ping": "pong"
}

通过-m选项调用ping模块，对被管理端执行ping操作

 

向指定的模块传递参数

[root@k8s-master01 ~]# ansible 192.168.10.170 -m shell -a "ip addr"
192.168.10.170 | CHANGED | rc=0 >>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:b5:b5:32 brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.170/24 brd 192.168.10.255 scope global noprefixroute dynamic ens3
       valid_lft 23730sec preferred_lft 23730sec
    inet6 fe80::2f78:3130:6efe:4b3a/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

通过-a传递的参数必须是-m指定模块能传递的参数；如果是shell或者command模块调用的执行命令，尽量用绝对路径操作

 

设置远程连接最大超时时间

比如你确定公司环境正常不会发生网络问题，ssh反向解析已经关闭；正常连接在几秒之内，这个时候如果服务或者主机连接时间特别长，或者你觉得根本就用不到那么长时间，是不是可以将连接超时的时间缩小或者放大？

[root@k8s-master01 ~]# ansible 192.168.10.170 -T 20 -m command -a "ip addr"
192.168.10.170 | UNREACHABLE! => {
    "changed": false, 
    "msg": "Failed to connect to the host via ssh: ssh: connect to host 192.168.10.170 port 22: Connection refused", 
    "unreachable": true
}

个人感觉这条指令作用不大

 

权限提升操作

比如现在公司都用的统一普通账户进行运维的工作，你要做批量部署或者批量管理，这个时候ansible临时命令应该用哪些方式及参数？

技术图片 
[root@k8s-master01 ~]# ansible 192.168.10.170 -m shell -a "ls -lah /root/" -u test1
192.168.10.170 | FAILED | rc=2 >>
ls: cannot open directory /root/: Permission deniednon-zero return code

[root@k8s-master01 ~]# ansible 192.168.10.170 -m shell -a "ls -lah /root/" -u test1 -b --become-method sudo -K
BECOME password: 
192.168.10.170 | CHANGED | rc=0 >>
total 28K
dr-xr-x---.  5 root root  185 Mar  8 20:16 .
dr-xr-xr-x. 17 root root  224 Jan 18 14:36 ..
-rw-------.  1 root root 1.4K Jan 18 14:37 anaconda-ks.cfg
drwx------   3 root root   17 Mar  3 14:51 .ansible
drwxr-xr-x   2 root root   85 Mar  8 19:22 .ansible_async
-rw-------.  1 root root  514 Mar  8 20:14 .bash_history
-rw-r--r--.  1 root root   18 Dec 29  2013 .bash_logout
-rw-r--r--.  1 root root  176 Dec 29  2013 .bash_profile
-rw-r--r--.  1 root root  176 Dec 29  2013 .bashrc
-rw-r--r--.  1 root root  100 Dec 29  2013 .cshrc
drwx------   2 root root   29 Mar  8 19:15 .ssh
-rw-r--r--.  1 root root  129 Dec 29  2013 .tcshrc

[root@k8s-master01 ~]# ansible 192.168.10.170 -m shell -a "ls -lah /root/" -u test1 -b --become-method su --become-user root -K
BECOME password: 
192.168.10.170 | CHANGED | rc=0 >>
total 28K
dr-xr-x---.  5 root root  185 Mar  8 20:16 .
dr-xr-xr-x. 17 root root  224 Jan 18 14:36 ..
-rw-------.  1 root root 1.4K Jan 18 14:37 anaconda-ks.cfg
drwx------   3 root root   17 Mar  3 14:51 .ansible
drwxr-xr-x   2 root root   85 Mar  8 19:22 .ansible_async
-rw-------.  1 root root  514 Mar  8 20:14 .bash_history
-rw-r--r--.  1 root root   18 Dec 29  2013 .bash_logout
-rw-r--r--.  1 root root  176 Dec 29  2013 .bash_profile
-rw-r--r--.  1 root root  176 Dec 29  2013 .bashrc
-rw-r--r--.  1 root root  100 Dec 29  2013 .cshrc
drwx------   2 root root   29 Mar  8 19:15 .ssh
-rw-r--r--.  1 root root  129 Dec 29  2013 .tcshrc
详情示例

第一次执行ansible的时候并没有成功，因为我是用test1用户去进行/root目录内容的查看，当然无法查看；

第二次执行ansible的时候成功了，采用的是sudo的方式进行权限的提升

第三次执行ansible的时候也成功了，采用的是su的方式进行权限的提升

参数讲解：

  • -u：指定被管理端用来远程的用户，我这里是test1
  • -b：开启权限提升模式，如果不用-b的话，后面的这些参数其实都没什么意义。
  • --become-method：指定采用何种方式进行权限的提升，方式有很多，常用的是su及sudo
  • --become-user：指定提升权限的用户，我想一般也只有提升权限的模式是su的时候才会用到吧，当然眼界仅限于我个人
  • -K：提升权限时需要输入的密码，如果你是sudo，并在被管理端的配置文件中设置了nopasswd，这里就不需要这个选项啦

 

设置程序最大远程执行时间

[root@k8s-master01 ~]# ansible 192.168.10.170 -m shell -a "sleep 15" -B 5 -P 2 -T 2
192.168.10.170 | FAILED | rc=-1 >>
async task did not complete within the requested time - 5s

[root@k8s-master01 ~]# ansible 192.168.10.170 -m shell -a "sleep 4" -B 5 -P 2 -T 2
192.168.10.170 | CHANGED => {
    "ansible_job_id": "660579276690.8952", 
    "changed": true, 
    "cmd": "sleep 4", 
    "delta": "0:00:04.009900", 
    "end": "2020-03-08 20:33:39.079987", 
    "finished": 1, 
    "rc": 0, 
    "start": "2020-03-08 20:33:35.070087", 
    "stderr": "", 
    "stderr_lines": [], 
    "stdout": "", 
    "stdout_lines": []
}

上面可以看到，我第一次将最大超时时间设置成5S、sleep 15；ansible告诉我最大请求反馈时间是5S。第二次我将sleep 改成4秒就正常了。上述参数选项说明如下：

  • -B：设置程序最大远程执行时间，并且放入后台执行。
  • -P：设置执行过程的轮询时间，这个参数是配合-B参数使用的；这里每2秒检查一下任务的执行进度
  • -T：设置ssh连接超时时间，意味着2秒如果没有连接上，任务失败。

 

异步并行任务

多台机器需要同时远程操作时，可以用-f来进行ansible任务的fork；

[root@k8s-master01 ~]# ansible 192.168.10.* -m shell -a "sleep 4" -f 3
192.168.10.170 | CHANGED | rc=0 >>


192.168.10.186 | CHANGED | rc=0 >>


[root@k8s-master01 ~]# ansible 192.168.10.* -m shell -a "sleep 4" -f 1
192.168.10.186 | CHANGED | rc=0 >>


192.168.10.170 | CHANGED | rc=0 >>

这里显示不明白，因为这里显示不出时间的先后，这里打字说明一下情况吧；第一次-f指定fork最大数3时，表示最多有3个节点可以并行执行，第二次-f指定fork数最大数是1是，表示只能一个节点一个节点的执行，但是这里要注意一下，如果你多个并行任务执行，ansible读取地址执行任务时在最大连接范围内可能不分先后，这个并行执行的先后顺序要注意一下

 

压缩输出参数

技术图片 
[root@k8s-master01 ~]# ansible 192.168.10.170 -m shell -a "ip addr" -o
192.168.10.170 | CHANGED | rc=0 | (stdout) 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000\n    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00\n    inet 127.0.0.1/8 scope host lo\n       valid_lft forever preferred_lft forever\n    inet6 ::1/128 scope host \n       valid_lft forever preferred_lft forever\n2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000\n    link/ether 52:54:00:b5:b5:32 brd ff:ff:ff:ff:ff:ff\n    inet 192.168.10.170/24 brd 192.168.10.255 scope global noprefixroute dynamic ens3\n       valid_lft 40946sec preferred_lft 40946sec\n    inet6 fe80::2f78:3130:6efe:4b3a/64 scope link noprefixroute \n       valid_lft forever preferred_lft forever
[root@k8s-master01 ~]# ansible 192.168.10.170 -m shell -a "ip addr"
192.168.10.170 | CHANGED | rc=0 >>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:b5:b5:32 brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.170/24 brd 192.168.10.255 scope global noprefixroute dynamic ens3
       valid_lft 40941sec preferred_lft 40941sec
    inet6 fe80::2f78:3130:6efe:4b3a/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
实例详情

这里可以看出，使用-o选项之后，ansible默认把系统默认的\n符号转换成了普通字符串\n；减少了输出的空内容

 

详细输出参数

有时候你想知道连接的详情，就通过-v或者N个-v选项来进行查看；例如：ansible的版本、配置文件、模块搜索路径、使用的python默认模块、python版本、调用的Inventory文件及连接的详情等等。

技术图片 
[root@k8s-master01 ~]# ansible 192.168.10.170 -m shell -a "ip addr" -vvv
ansible 2.9.3
  config file = /etc/ansible/ansible.cfg
  configured module search path = [u‘/root/.ansible/plugins/modules‘, u‘/usr/share/ansible/plugins/modules‘]
  ansible python module location = /usr/lib/python2.7/site-packages/ansible
  executable location = /usr/bin/ansible
  python version = 2.7.5 (default, Oct 30 2018, 23:45:53) [GCC 4.8.5 20150623 (Red Hat 4.8.5-36)]
Using /etc/ansible/ansible.cfg as config file
host_list declined parsing /etc/ansible/hosts as it did not pass its verify_file() method
script declined parsing /etc/ansible/hosts as it did not pass its verify_file() method
auto declined parsing /etc/ansible/hosts as it did not pass its verify_file() method
Parsed /etc/ansible/hosts inventory source with ini plugin
META: ran handlers
<192.168.10.170> ESTABLISH SSH CONNECTION FOR USER: None
<192.168.10.170> SSH: EXEC ssh -C -o ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no -o PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey -o PasswordAuthentication=no -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/a9efa3225b 192.168.10.170 ‘/bin/sh -c ‘"‘"‘echo ~ && sleep 0‘"‘"‘‘
<192.168.10.170> (0, ‘/root\n‘, ‘‘)
<192.168.10.170> ESTABLISH SSH CONNECTION FOR USER: None
<192.168.10.170> SSH: EXEC ssh -C -o ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no -o PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey -o PasswordAuthentication=no -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/a9efa3225b 192.168.10.170 ‘/bin/sh -c ‘"‘"‘( umask 77 && mkdir -p "` echo /root/.ansible/tmp/ansible-tmp-1583671586.84-124750328385027 `" && echo ansible-tmp-1583671586.84-124750328385027="` echo /root/.ansible/tmp/ansible-tmp-1583671586.84-124750328385027 `" ) && sleep 0‘"‘"‘‘
<192.168.10.170> (0, ‘ansible-tmp-1583671586.84-124750328385027=/root/.ansible/tmp/ansible-tmp-1583671586.84-124750328385027\n‘, ‘‘)
<192.168.10.170> Attempting python interpreter discovery
<192.168.10.170> ESTABLISH SSH CONNECTION FOR USER: None
<192.168.10.170> SSH: EXEC ssh -C -o ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no -o PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey -o PasswordAuthentication=no -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/a9efa3225b 192.168.10.170 ‘/bin/sh -c ‘"‘"‘echo PLATFORM; uname; echo FOUND; command -v ‘"‘"‘"‘"‘"‘"‘"‘"‘/usr/bin/python‘"‘"‘"‘"‘"‘"‘"‘"‘; command -v ‘"‘"‘"‘"‘"‘"‘"‘"‘python3.7‘"‘"‘"‘"‘"‘"‘"‘"‘; command -v ‘"‘"‘"‘"‘"‘"‘"‘"‘python3.6‘"‘"‘"‘"‘"‘"‘"‘"‘; command -v ‘"‘"‘"‘"‘"‘"‘"‘"‘python3.5‘"‘"‘"‘"‘"‘"‘"‘"‘; command -v ‘"‘"‘"‘"‘"‘"‘"‘"‘python2.7‘"‘"‘"‘"‘"‘"‘"‘"‘; command -v ‘"‘"‘"‘"‘"‘"‘"‘"‘python2.6‘"‘"‘"‘"‘"‘"‘"‘"‘; command -v ‘"‘"‘"‘"‘"‘"‘"‘"‘/usr/libexec/platform-python‘"‘"‘"‘"‘"‘"‘"‘"‘; command -v ‘"‘"‘"‘"‘"‘"‘"‘"‘/usr/bin/python3‘"‘"‘"‘"‘"‘"‘"‘"‘; command -v ‘"‘"‘"‘"‘"‘"‘"‘"‘python‘"‘"‘"‘"‘"‘"‘"‘"‘; echo ENDFOUND && sleep 0‘"‘"‘‘
<192.168.10.170> (0, ‘PLATFORM\nLinux\nFOUND\n/usr/bin/python\n/usr/bin/python2.7\n/usr/libexec/platform-python\n/usr/bin/python\nENDFOUND\n‘, ‘‘)
<192.168.10.170> ESTABLISH SSH CONNECTION FOR USER: None
<192.168.10.170> SSH: EXEC ssh -C -o ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no -o PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey -o PasswordAuthentication=no -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/a9efa3225b 192.168.10.170 ‘/bin/sh -c ‘"‘"‘/usr/bin/python && sleep 0‘"‘"‘‘
<192.168.10.170> (0, ‘{"osrelease_content": "NAME=\\"CentOS Linux\\"\\nVERSION=\\"7 (Core)\\"\\nID=\\"centos\\"\\nID_LIKE=\\"rhel fedora\\"\\nVERSION_ID=\\"7\\"\\nPRETTY_NAME=\\"CentOS Linux 7 (Core)\\"\\nANSI_COLOR=\\"0;31\\"\\nCPE_NAME=\\"cpe:/o:centos:centos:7\\"\\nHOME_URL=\\"https://www.centos.org/\\"\\nBUG_REPORT_URL=\\"https://bugs.centos.org/\\"\\n\\nCENTOS_MANTISBT_PROJECT=\\"CentOS-7\\"\\nCENTOS_MANTISBT_PROJECT_VERSION=\\"7\\"\\nREDHAT_SUPPORT_PRODUCT=\\"centos\\"\\nREDHAT_SUPPORT_PRODUCT_VERSION=\\"7\\"\\n\\n", "platform_dist_result": ["centos", "7.6.1810", "Core"]}\n‘, ‘‘)
Using module file /usr/lib/python2.7/site-packages/ansible/modules/commands/command.py
<192.168.10.170> PUT /root/.ansible/tmp/ansible-local-84126c23rI/tmpPTfumZ TO /root/.ansible/tmp/ansible-tmp-1583671586.84-124750328385027/AnsiballZ_command.py
<192.168.10.170> SSH: EXEC sftp -b - -C -o ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no -o PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey -o PasswordAuthentication=no -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/a9efa3225b ‘[192.168.10.170]‘
<192.168.10.170> (0, ‘sftp> put /root/.ansible/tmp/ansible-local-84126c23rI/tmpPTfumZ /root/.ansible/tmp/ansible-tmp-1583671586.84-124750328385027/AnsiballZ_command.py\n‘, ‘‘)
<192.168.10.170> ESTABLISH SSH CONNECTION FOR USER: None
<192.168.10.170> SSH: EXEC ssh -C -o ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no -o PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey -o PasswordAuthentication=no -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/a9efa3225b 192.168.10.170 ‘/bin/sh -c ‘"‘"‘chmod u+x /root/.ansible/tmp/ansible-tmp-1583671586.84-124750328385027/ /root/.ansible/tmp/ansible-tmp-1583671586.84-124750328385027/AnsiballZ_command.py && sleep 0‘"‘"‘‘
<192.168.10.170> (0, ‘‘, ‘‘)
<192.168.10.170> ESTABLISH SSH CONNECTION FOR USER: None
<192.168.10.170> SSH: EXEC ssh -C -o ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no -o PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey -o PasswordAuthentication=no -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/a9efa3225b -tt 192.168.10.170 ‘/bin/sh -c ‘"‘"‘/usr/bin/python /root/.ansible/tmp/ansible-tmp-1583671586.84-124750328385027/AnsiballZ_command.py && sleep 0‘"‘"‘‘
<192.168.10.170> (0, ‘\r\n{"changed": true, "end": "2020-03-08 20:46:27.852608", "stdout": "1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000\\n    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00\\n    inet 127.0.0.1/8 scope host lo\\n       valid_lft forever preferred_lft forever\\n    inet6 ::1/128 scope host \\n       valid_lft forever preferred_lft forever\\n2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000\\n    link/ether 52:54:00:b5:b5:32 brd ff:ff:ff:ff:ff:ff\\n    inet 192.168.10.170/24 brd 192.168.10.255 scope global noprefixroute dynamic ens3\\n       valid_lft 40845sec preferred_lft 40845sec\\n    inet6 fe80::2f78:3130:6efe:4b3a/64 scope link noprefixroute \\n       valid_lft forever preferred_lft forever", "cmd": "ip addr", "rc": 0, "start": "2020-03-08 20:46:27.843091", "stderr": "", "delta": "0:00:00.009517", "invocation": {"module_args": {"creates": null, "executable": null, "_uses_shell": true, "strip_empty_ends": true, "_raw_params": "ip addr", "removes": null, "argv": null, "warn": true, "chdir": null, "stdin_add_newline": true, "stdin": null}}}\r\n‘, ‘Shared connection to 192.168.10.170 closed.\r\n‘)
<192.168.10.170> ESTABLISH SSH CONNECTION FOR USER: None
<192.168.10.170> SSH: EXEC ssh -C -o ControlMaster=auto -o ControlPersist=60s -o KbdInteractiveAuthentication=no -o PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey -o PasswordAuthentication=no -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/a9efa3225b 192.168.10.170 ‘/bin/sh -c ‘"‘"‘rm -f -r /root/.ansible/tmp/ansible-tmp-1583671586.84-124750328385027/ > /dev/null 2>&1 && sleep 0‘"‘"‘‘
<192.168.10.170> (0, ‘‘, ‘‘)
192.168.10.170 | CHANGED | rc=0 >>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:b5:b5:32 brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.170/24 brd 192.168.10.255 scope global noprefixroute dynamic ens3
       valid_lft 40845sec preferred_lft 40845sec
    inet6 fe80::2f78:3130:6efe:4b3a/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

META: ran handlers
META: ran handlers
实例详情

 

日志输出目录参数

[root@k8s-master01 ~]# ansible 192.168.10.170 -m shell -a "ip addr" -t /opt/file
192.168.10.170 | CHANGED | rc=0 >>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:b5:b5:32 brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.170/24 brd 192.168.10.255 scope global noprefixroute dynamic ens3
       valid_lft 39575sec preferred_lft 39575sec
    inet6 fe80::2f78:3130:6efe:4b3a/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

-t参数会在指定的目录生成输出文件，文件内容是按照压缩格式输出的，如果目录不存在会创建目录，并且在目录下面按照IP地址生成文件

 

排除主机或者组

[root@k8s-master01 ~]# ansible all -m ping -l test2
192.168.10.186 | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python"
    }, 
    "changed": false, 
    "ping": "pong"
}
[root@k8s-master01 ~]# ansible all -m ping -l 192.168.10.170
192.168.10.170 | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python"
    }, 
    "changed": false, 
    "ping": "pong"
}

-l或者--limit就是在一个指定组中或者一个地址范围中要限定的内容；比如：192.168.10.0/24网段的主机，test1组中有192.168.1.1及192.168.10.1，我现在只想让192.168.10.1去执行内容，其他的不想让他执行。这个地方跨网段测试没试过，日后留意

 

参考内容：

  • Ansile 权威指南
  • https://docs.ansible.com/

Ansible命令介绍之ansible

标签：目录   pretty   persist   创建目录   地址   www   地方   参考   temp   

原文地址：https://www.cnblogs.com/guge-94/p/12444988.html
踩
(0)
赞
(0)
   
举报
评论 一句话评论（0）
登录后才能评论！
分享档案
更多>
2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)
周排行
mamicode.com排行更多图片
更多
友情链接
兰亭集智   国之画   百度统计   站长统计   阿里云   chrome插件   新版天听网
关于我们 - 联系我们 - 留言反馈
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码！