标签：span post switch 需要 mic tor 目的 nts call
There are 4 power domains within DAPM:
DAPM框架为我们提供了大量的辅助宏用来定义各种各样的widget控件.
widget 结构体如下：
* dapm widget */ struct snd_soc_dapm_widget { enum snd_soc_dapm_type id; const char *name; /* widget name */ const char *sname; /* stream name */ struct list_head list; struct snd_soc_dapm_context *dapm; void *priv; /* widget specific data */ struct regulator *regulator; /* attached regulator */ const struct snd_soc_pcm_stream *params; /* params for dai links */ unsigned int num_params; /* number of params for dai links */ unsigned int params_select; /* currently selected param for dai link */ /* dapm control */ int reg; /* negative reg = no direct dapm */ unsigned char shift; /* bits to shift */ unsigned int mask; /* non-shifted mask */ unsigned int on_val; /* on state value */ unsigned int off_val; /* off state value */ unsigned char power:1; /* block power status */ unsigned char active:1; /* active stream on DAC, ADC‘s */ unsigned char connected:1; /* connected codec pin */ unsigned char new:1; /* cnew complete */ unsigned char force:1; /* force state */ unsigned char ignore_suspend:1; /* kept enabled over suspend */ unsigned char new_power:1; /* power from this run */ unsigned char power_checked:1; /* power checked this run */ unsigned char is_supply:1; /* Widget is a supply type widget */ unsigned char is_ep:2; /* Widget is a endpoint type widget */ int subseq; /* sort within widget type */ int (*power_check)(struct snd_soc_dapm_widget *w); /* external events */ unsigned short event_flags; /* flags to specify event types */ int (*event)(struct snd_soc_dapm_widget*, struct snd_kcontrol *, int); /* kcontrols that relate to this widget */ int num_kcontrols; const struct snd_kcontrol_new *kcontrol_news; struct snd_kcontrol **kcontrols; struct snd_soc_dobj dobj; /* widget input and output edges */ struct list_head edges[2]; /* used during DAPM updates */ struct list_head work_list; struct list_head power_list; struct list_head dirty; int endpoints[2]; struct clk *clk; };
widget的type:
/* dapm widget types */ enum snd_soc_dapm_type { snd_soc_dapm_input = 0, /* input pin */ snd_soc_dapm_output, /* output pin */ snd_soc_dapm_mux, /* selects 1 analog signal from many inputs */ snd_soc_dapm_demux, /* connects the input to one of multiple outputs */ snd_soc_dapm_mixer, /* mixes several analog signals together */ snd_soc_dapm_mixer_named_ctl, /* mixer with named controls */ snd_soc_dapm_pga, /* programmable gain/attenuation (volume) */ snd_soc_dapm_out_drv, /* output driver */ snd_soc_dapm_adc, /* analog to digital converter */ snd_soc_dapm_dac, /* digital to analog converter */ snd_soc_dapm_micbias, /* microphone bias (power) - DEPRECATED: use snd_soc_dapm_supply */ snd_soc_dapm_mic, /* microphone */ snd_soc_dapm_hp, /* headphones */ snd_soc_dapm_spk, /* speaker */ snd_soc_dapm_line, /* line input/output */ snd_soc_dapm_switch, /* analog switch */ snd_soc_dapm_vmid, /* codec bias/vmid - to minimise pops */ snd_soc_dapm_pre, /* machine specific pre widget - exec first */ snd_soc_dapm_post, /* machine specific post widget - exec last */ snd_soc_dapm_supply, /* power/clock supply */ snd_soc_dapm_regulator_supply, /* external regulator */ snd_soc_dapm_clock_supply, /* external clock */ snd_soc_dapm_aif_in, /* audio interface input */ snd_soc_dapm_aif_out, /* audio interface output */ snd_soc_dapm_siggen, /* signal generator */ snd_soc_dapm_sink, snd_soc_dapm_dai_in, /* link to DAI structure */ snd_soc_dapm_dai_out, snd_soc_dapm_dai_link, /* link between two DAI structures */ snd_soc_dapm_kcontrol, /* Auto-disabled kcontrol */ };
codec domain:
/* codec domain */ #define SND_SOC_DAPM_VMID(wname) \ { .id = snd_soc_dapm_vmid, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0}
platform domain:
platform domain的widget分别对应信号发生器，输入引脚，输出引脚，麦克风，耳机，扬声器，线路输入接口。其中的reg字段被设置为SND_SOC_NOPM（-1），表明这些widget是没有寄存器控制位来控制widget的电源状态的。麦克风，耳机，扬声器，线路输入接口这几种widget，还可以定义一个dapm事件回调函数wevent，从event_flags字段的设置可以看出，他们只会响应SND_SOC_DAPM_POST_PMU（上电后）和SND_SOC_DAPM_PMD（下电前）事件，这几个widget通常会在machine驱动中定义，而SND_SOC_DAPM_INPUT和SND_SOC_DAPM_OUTPUT则用来定义codec芯片的输出输入脚，通常在codec驱动中定义，最后，在machine驱动中增加相应的route，把麦克风和耳机等widget与相应的codec输入输出引脚的widget连接起来。
/* platform domain */ #define SND_SOC_DAPM_SIGGEN(wname) \ { .id = snd_soc_dapm_siggen, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, .reg = SND_SOC_NOPM } #define SND_SOC_DAPM_SINK(wname) \ { .id = snd_soc_dapm_sink, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, .reg = SND_SOC_NOPM } #define SND_SOC_DAPM_INPUT(wname) \ { .id = snd_soc_dapm_input, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, .reg = SND_SOC_NOPM } #define SND_SOC_DAPM_OUTPUT(wname) \ { .id = snd_soc_dapm_output, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, .reg = SND_SOC_NOPM } #define SND_SOC_DAPM_MIC(wname, wevent) \ { .id = snd_soc_dapm_mic, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD} #define SND_SOC_DAPM_HP(wname, wevent) \ { .id = snd_soc_dapm_hp, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD} #define SND_SOC_DAPM_SPK(wname, wevent) \ { .id = snd_soc_dapm_spk, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD} #define SND_SOC_DAPM_LINE(wname, wevent) \ { .id = snd_soc_dapm_line, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
path domain:
path domain 的widget通常是对普通kcontrols控件的再封装，增加音频路径和电源管理功能，所以这种widget会包含一个或多个kcontrol，这些widget的reg和shift字段是需要赋值的，说明这些widget是有相应的电源控制寄存器的，DAPM框架在扫描和更新音频路径时，会利用这些寄存器来控制widget的电源状态，使得它们的供电状态是按需分配的，需要的时候（在有效的音频路径上）上电，不需要的时候（不再有效的音频路径上）下电。
#define SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert) \ .reg = wreg, .mask = 1, .shift = wshift, .on_val = winvert ? 0 : 1, .off_val = winvert ? 1 : 0 /* path domain */ #define SND_SOC_DAPM_PGA(wname, wreg, wshift, winvert,\ wcontrols, wncontrols) { .id = snd_soc_dapm_pga, .name = wname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_OUT_DRV(wname, wreg, wshift, winvert,\ wcontrols, wncontrols) { .id = snd_soc_dapm_out_drv, .name = wname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_MIXER(wname, wreg, wshift, winvert, \ wcontrols, wncontrols){ .id = snd_soc_dapm_mixer, .name = wname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_MIXER_NAMED_CTL(wname, wreg, wshift, winvert, \ wcontrols, wncontrols){ .id = snd_soc_dapm_mixer_named_ctl, .name = wname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} /* DEPRECATED: use SND_SOC_DAPM_SUPPLY */ #define SND_SOC_DAPM_MICBIAS(wname, wreg, wshift, winvert) \ { .id = snd_soc_dapm_micbias, .name = wname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .kcontrol_news = NULL, .num_kcontrols = 0} #define SND_SOC_DAPM_SWITCH(wname, wreg, wshift, winvert, wcontrols) \ { .id = snd_soc_dapm_switch, .name = wname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_MUX(wname, wreg, wshift, winvert, wcontrols) \ { .id = snd_soc_dapm_mux, .name = wname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_DEMUX(wname, wreg, wshift, winvert, wcontrols) \ { .id = snd_soc_dapm_demux, .name = wname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .kcontrol_news = wcontrols, .num_kcontrols = 1}
这些widget需要完成和的mixer、mux等控件同样的功能，实际上，这是通过它们包含的kcontrol控件来完成的，这些kcontrol我们需要在定义widget前先定义好，然后通过wcontrols和num_kcontrols参数传递给这些辅助定义宏。dapm利用这些kcontrol完成音频路径的控制。不过，对于widget来说，它的任务还不止这些，dapm还要动态地管理这些音频路径的连结关系，以便可以根据这些连接关系来控制这些widget的电源状态，如果按照普通的方法定义这些kcontrol，是无法达到这个目的的，因此，dapm为我们提供了另外一套定义宏，由它们完成这些被widget包含的kcontrol的定义。
/* dapm kcontrol types */ #define SOC_DAPM_SINGLE(xname, reg, shift, max, invert) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_soc_info_volsw, .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) } #define SOC_DAPM_SINGLE_AUTODISABLE(xname, reg, shift, max, invert) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_soc_info_volsw, .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 1) } #define SOC_DAPM_SINGLE_VIRT(xname, max) \ SOC_DAPM_SINGLE(xname, SND_SOC_NOPM, 0, max, 0) #define SOC_DAPM_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_soc_info_volsw, .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | SNDRV_CTL_ELEM_ACCESS_READWRITE, .tlv.p = (tlv_array), .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) } #define SOC_DAPM_SINGLE_TLV_AUTODISABLE(xname, reg, shift, max, invert, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_soc_info_volsw, .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | SNDRV_CTL_ELEM_ACCESS_READWRITE, .tlv.p = (tlv_array), .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 1) } #define SOC_DAPM_SINGLE_TLV_VIRT(xname, max, tlv_array) \ SOC_DAPM_SINGLE(xname, SND_SOC_NOPM, 0, max, 0, tlv_array) #define SOC_DAPM_ENUM(xname, xenum) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_soc_info_enum_double, .get = snd_soc_dapm_get_enum_double, .put = snd_soc_dapm_put_enum_double, .private_value = (unsigned long)&xenum } #define SOC_DAPM_ENUM_EXT(xname, xenum, xget, xput) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_soc_info_enum_double, .get = xget, .put = xput, .private_value = (unsigned long)&xenum } #define SOC_DAPM_PIN_SWITCH(xname) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname " Switch", .info = snd_soc_dapm_info_pin_switch, .get = snd_soc_dapm_get_pin_switch, .put = snd_soc_dapm_put_pin_switch, .private_value = (unsigned long)xname }
以看出，SOC_DAPM_SINGLE对应与普通控件的SOC_SINGLE，SOC_DAPM_SINGLE_TLV对应SOC_SINGLE_TLV......，相比普通的kcontrol控件，dapm的kcontrol控件只是把info，get，put回调函数换掉了。dapm kcontrol的put回调函数不仅仅会更新控件本身的状态，他还会把这种变化传递到相邻的dapm kcontrol，相邻的dapm kcontrol又会传递这个变化到他自己相邻的dapm kcontrol，直到音频路径的末端，通过这种机制，只要改变其中一个widget的连接状态，与之相关的所有widget都会被扫描并测试一下自身是否还在有效的音频路径中，从而可以动态地改变自身的电源状态，这就是dapm的精髓所在。
stream domain:
这些widget主要包含音频输入/输出接口，ADC/DAC等等：
/* stream domain */ #define SND_SOC_DAPM_AIF_IN(wname, stname, wslot, wreg, wshift, winvert) \ { .id = snd_soc_dapm_aif_in, .name = wname, .sname = stname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), } #define SND_SOC_DAPM_AIF_IN_E(wname, stname, wslot, wreg, wshift, winvert, \ wevent, wflags) { .id = snd_soc_dapm_aif_in, .name = wname, .sname = stname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .event = wevent, .event_flags = wflags } #define SND_SOC_DAPM_AIF_OUT(wname, stname, wslot, wreg, wshift, winvert) \ { .id = snd_soc_dapm_aif_out, .name = wname, .sname = stname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), } #define SND_SOC_DAPM_AIF_OUT_E(wname, stname, wslot, wreg, wshift, winvert, \ wevent, wflags) { .id = snd_soc_dapm_aif_out, .name = wname, .sname = stname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .event = wevent, .event_flags = wflags } #define SND_SOC_DAPM_DAC(wname, stname, wreg, wshift, winvert) \ { .id = snd_soc_dapm_dac, .name = wname, .sname = stname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert) } #define SND_SOC_DAPM_DAC_E(wname, stname, wreg, wshift, winvert, \ wevent, wflags) { .id = snd_soc_dapm_dac, .name = wname, .sname = stname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_ADC(wname, stname, wreg, wshift, winvert) \ { .id = snd_soc_dapm_adc, .name = wname, .sname = stname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), } #define SND_SOC_DAPM_ADC_E(wname, stname, wreg, wshift, winvert, \ wevent, wflags) { .id = snd_soc_dapm_adc, .name = wname, .sname = stname, SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_CLOCK_SUPPLY(wname) \ { .id = snd_soc_dapm_clock_supply, .name = wname, .reg = SND_SOC_NOPM, .event = dapm_clock_event, .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD }
route 表示widget的连接路径(Destination Widget <=== Path Name <=== Source Widget)。route结构体如下:
/* * DAPM audio route definition. * * Defines an audio route originating at source via control and finishing * at sink. */ struct snd_soc_dapm_route { const char *sink; const char *control; const char *source; /* Note: currently only supported for links where source is a supply */ int (*connected)(struct snd_soc_dapm_widget *source, struct snd_soc_dapm_widget *sink); };
以sound/soc/codecs/tlv320aic23.c 为例，以下是tlv320 codec driver定义的widget定义的widgets和route
DAPM Widgets:
static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = {
SND_SOC_DAPM_DAC("DAC", "Playback", TLV320AIC23_PWR, 3, 1),
SND_SOC_DAPM_ADC("ADC", "Capture", TLV320AIC23_PWR, 2, 1),
SND_SOC_DAPM_MUX("Capture Source", SND_SOC_NOPM, 0, 0,
&tlv320aic23_rec_src_mux_controls),
SND_SOC_DAPM_MIXER("Output Mixer", TLV320AIC23_PWR, 4, 1,
&tlv320aic23_output_mixer_controls[0],
ARRAY_SIZE(tlv320aic23_output_mixer_controls)),
SND_SOC_DAPM_PGA("Line Input", TLV320AIC23_PWR, 0, 1, NULL, 0),
SND_SOC_DAPM_PGA("Mic Input", TLV320AIC23_PWR, 1, 1, NULL, 0),
SND_SOC_DAPM_OUTPUT("LHPOUT"),
SND_SOC_DAPM_OUTPUT("RHPOUT"),
SND_SOC_DAPM_OUTPUT("LOUT"),
SND_SOC_DAPM_OUTPUT("ROUT"),
SND_SOC_DAPM_INPUT("LLINEIN"),
SND_SOC_DAPM_INPUT("RLINEIN"),
SND_SOC_DAPM_INPUT("MICIN"),
};
widget kcontrol:
/* PGA Mixer controls for Line and Mic switch */ static const struct snd_kcontrol_new tlv320aic23_output_mixer_controls[] = { SOC_DAPM_SINGLE("Line Bypass Switch", TLV320AIC23_ANLG, 3, 1, 0), SOC_DAPM_SINGLE("Mic Sidetone Switch", TLV320AIC23_ANLG, 5, 1, 0), SOC_DAPM_SINGLE("Playback Switch", TLV320AIC23_ANLG, 4, 1, 0), };
DAPM routes:
static const struct snd_soc_dapm_route tlv320aic23_intercon[] = {
/* Output Mixer */
{"Output Mixer", "Line Bypass Switch", "Line Input"},
{"Output Mixer", "Playback Switch", "DAC"},
{"Output Mixer", "Mic Sidetone Switch", "Mic Input"},
/* Outputs */
{"RHPOUT", NULL, "Output Mixer"},
{"LHPOUT", NULL, "Output Mixer"},
{"LOUT", NULL, "Output Mixer"},
{"ROUT", NULL, "Output Mixer"},
/* Inputs */
{"Line Input", "NULL", "LLINEIN"},
{"Line Input", "NULL", "RLINEIN"},
{"Mic Input", "NULL", "MICIN"},
/* input mux */
{"Capture Source", "Line", "Line Input"},
{"Capture Source", "Mic", "Mic Input"},
{"ADC", NULL, "Capture Source"},
};
capture audio path:
LLININ->Line Input->Catpture source ->ADC
MICIN->Mic Input->Catpute source->ADC
playback audio path:
DAC->Ouptput Mixer->LOUT/LHPOUT/ROUT/RHPOUT
LLININ->Line Input->Output Mixer->LOUT
MICIN->Mic Input ->Output Mixer->LOUT/LHPOUT/ROUT/RHPOUT
DAPM widget和route定义在CPU DAI driver和Codec driver的component driver.当调用snd_soc_register_component()注册CPU DAI ， 调用snd_soc_register_codec()注册Codec时，都会创建snd_soc_component类型的component, 并调用snd_soc_component_initialize()将component driver中定义的widgets和route赋值给component。
标签：span post switch 需要 mic tor 目的 nts call
原文地址：https://www.cnblogs.com/fellow1988/p/12685379.html
