尝试了一下alsa录音播放的编程。

#define DEVICE "default"

int StartPCMRecording(AUDIO_RECORD *pAudioRecord)
{
    int rc, size, dir;
    snd_pcm_t *handle;
    snd_pcm_hw_params_t *params;
    snd_pcm_uframes_t frames, ret;

    /* Open PCM device for record. */
    rc = snd_pcm_open(&handle, DEVICE, SND_PCM_STREAM_CAPTURE, 0);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

#if 0
    /* Allocate a hardware parameters object. */
    rc = snd_pcm_hw_params_malloc(&params);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    /* Fill it in with default values. */
    rc = snd_pcm_hw_params_any(handle, params);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    /* Signed 16-bit little-endian format */
    rc = snd_pcm_hw_params_set_format(handle, params, FORMAT);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    /* One channels (stereo) */
    rc = snd_pcm_hw_params_set_channels(handle, params, CHANNLE);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    rc = snd_pcm_hw_params_set_access (handle, params,SND_PCM_ACCESS_RW_INTERLEAVED );
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    /* 16000  sampling rate  */
    rc = snd_pcm_hw_params_set_rate(handle, params, SAMPLE_RATE, 0);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    frames = FRAMES_SIZE;
    rc = snd_pcm_sw_params_set_avail_min(handle,params,frames);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    /* Write the parameters to the driver */
    rc = snd_pcm_hw_params(handle, params);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));
#endif
    //int snd_pcm_set_params(snd_pcm_t *pcm,
    //                   snd_pcm_format_t format,
    //                   snd_pcm_access_t access,
    //                  unsigned int channels,
    //                   unsigned int rate,
    //                   int soft_resample,
    //                   unsigned int latency);
    snd_pcm_set_params(handle,SND_PCM_FORMAT_S16_LE,SND_PCM_ACCESS_RW_INTERLEAVED,1,48000,0,500000);

int read_from_pcm(void *pDevice, void *pData, int samples)
{
    int ret;
    snd_pcm_t *handle = (snd_pcm_t *)pDevice;
    int nData=samples;

    //snd_pcm_wait(handle,20) ;
    ret = snd_pcm_readi(handle, pData, nData);
    return samples;
}

        snd_pcm_drain(handle);
        snd_pcm_close(handle);

void startPlaying(){
    /* Open PCM device for playback. */
    rc = snd_pcm_open(&handle,DEVICE, SND_PCM_STREAM_PLAYBACK, 0);
    printf("[StartPCMPlaying]:snd_pcm_open return value is %d\n",rc);
    //int snd_pcm_set_params(snd_pcm_t *pcm,
    //                   snd_pcm_format_t format,
    //                   snd_pcm_access_t access,
    //                  unsigned int channels,
    //                   unsigned int rate,
    //                   int soft_resample,
    //                   unsigned int latency);
    snd_pcm_set_params(handle,SND_PCM_FORMAT_S16_LE,SND_PCM_ACCESS_RW_INTERLEAVED,1,48000,1,500000);
#if 0    
    /* Allocate a hardware parameters object. */
    rc = snd_pcm_hw_params_malloc(&params);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    /* Fill it in with default values. */
    rc=snd_pcm_hw_params_any(handle, params);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    /* Signed 16-bit little-endian format */
    rc=snd_pcm_hw_params_set_format(handle, params, SND_PCM_FORMAT_S16_LE);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    /* Two channels (stereo) */
    rc=snd_pcm_hw_params_set_channels(handle, params, 1);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    /* 44100 bits/second sampling rate (CD quality) */
    int val = 16000;
    rc=snd_pcm_hw_params_set_rate_near(handle, params,     &val, &dir);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    rc = snd_pcm_hw_params_set_access (handle, params,SND_PCM_ACCESS_RW_INTERLEAVED );
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));


    rc = snd_pcm_hw_params_set_period_size_near(handle, params, &frames, &dir);
    if (rc!=0) printf("%d, return %d, %s \n",__LINE__,rc,snd_strerror(rc));

    /* Write the parameters to the driver */
    rc = snd_pcm_hw_params(handle, params);
    if (rc < 0)
    {
        fprintf(stderr, "unable to set hw parameters: %s\n",
                snd_strerror(rc));
        exit(1);
    }
 #endif   
}

void write_to_pcm(void *pDevice, void *pData, int frames)
{
    int nlen = frames ;
    int rc = snd_pcm_writei(pDevice, pData, nlen);
}

void int StopPlaying(void *pDevice)
{
    snd_pcm_drain(pDevice;
    snd_pcm_close(pDevice);
}