标签:udp license host nta rest cal rap ide wait
#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # +---------------------------+ +------------------------------+ # | vrf-h1 | | vrf-h2 | # | + $h1 | | + $h2 | # | | 10.1.1.101/24 | | | 10.1.2.101/24 | # | | default via 10.1.1.1 | | | default via 10.1.2.1 | # +----|----------------------+ +----|-------------------------+ # | | # +----|--------------------------------------------|-------------------------+ # | SW | | | # | +--|--------------------------------------------|-----------------------+ | # | | + $swp1 br1 + $swp2 | | # | | vid 10 pvid untagged vid 20 pvid untagged | | # | | | | # | | + vx10 + vx20 | | # | | local 10.0.0.1 local 10.0.0.1 | | # | | remote 10.0.0.2 remote 10.0.0.2 | | # | | id 1010 id 1020 | | # | | dstport 4789 dstport 4789 | | # | | vid 10 pvid untagged vid 20 pvid untagged | | # | | | | # | | + vx4001 | | # | | local 10.0.0.1 | | # | | remote 10.0.0.2 | | # | | id 104001 | | # | | dstport 4789 | | # | | vid 4001 pvid untagged | | # | | | | # | +-----------------------------------+-----------------------------------+ | # | | | # | +-----------------------------------|-----------------------------------+ | # | | | | | # | | +--------------------------------+--------------------------------+ | | # | | | | | | | # | | + vlan10 | vlan20 + | | # | | | 10.1.1.11/24 | 10.1.2.11/24 | | | # | | | | | | | # | | + vlan10-v (macvlan) + vlan20-v (macvlan) + | | # | | 10.1.1.1/24 vlan4001 10.1.2.1/24 | | # | | 00:00:5e:00:01:01 00:00:5e:00:01:01 | | # | | vrf-green | | # | +-----------------------------------------------------------------------+ | # | | # | + $rp1 +lo | # | | 192.0.2.1/24 10.0.0.1/32 | # +----|----------------------------------------------------------------------+ # | # +----|--------------------------------------------------------+ # | | vrf-spine | # | + $rp2 | # | 192.0.2.2/24 | # | | (maybe) HW # ============================================================================= # | | (likely) SW # | | # | + v1 (veth) | # | | 192.0.3.2/24 | # +----|--------------------------------------------------------+ # | # +----|----------------------------------------------------------------------+ # | + v2 (veth) +lo NS1 (netns) | # | 192.0.3.1/24 10.0.0.2/32 | # | | # | +-----------------------------------------------------------------------+ | # | | vrf-green | | # | | + vlan10-v (macvlan) vlan20-v (macvlan) + | | # | | | 10.1.1.1/24 10.1.2.1/24 | | | # | | | 00:00:5e:00:01:01 00:00:5e:00:01:01 | | | # | | | vlan4001 | | | # | | + vlan10 + vlan20 + | | # | | | 10.1.1.12/24 | 10.1.2.12/24 | | | # | | | | | | | # | | +--------------------------------+--------------------------------+ | | # | | | | | # | +-----------------------------------|-----------------------------------+ | # | | | # | +-----------------------------------+-----------------------------------+ | # | | | | # | | + vx10 + vx20 | | # | | local 10.0.0.2 local 10.0.0.2 | | # | | remote 10.0.0.1 remote 10.0.0.1 | | # | | id 1010 id 1020 | | # | | dstport 4789 dstport 4789 | | # | | vid 10 pvid untagged vid 20 pvid untagged | | # | | | | # | | + vx4001 | | # | | local 10.0.0.2 | | # | | remote 10.0.0.1 | | # | | id 104001 | | # | | dstport 4789 | | # | | vid 4001 pvid untagged | | # | | | | # | | + w1 (veth) + w3 (veth) | | # | | | vid 10 pvid untagged br1 | vid 20 pvid untagged | | # | +--|------------------------------------------|-------------------------+ | # | | | | # | | | | # | +--|----------------------+ +--|-------------------------+ | # | | | vrf-h1 | | | vrf-h2 | | # | | + w2 (veth) | | + w4 (veth) | | # | | 10.1.1.102/24 | | 10.1.2.102/24 | | # | | default via 10.1.1.1 | | default via 10.1.2.1 | | # | +-------------------------+ +----------------------------+ | # +---------------------------------------------------------------------------+ ALL_TESTS=" ping_ipv4 " NUM_NETIFS=6 source lib.sh hx_create() { local vrf_name=$1; shift local if_name=$1; shift local ip_addr=$1; shift local gw_ip=$1; shift vrf_create $vrf_name ip link set dev $if_name master $vrf_name ip link set dev $vrf_name up ip link set dev $if_name up ip address add $ip_addr/24 dev $if_name ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent dev $if_name ip route add default vrf $vrf_name nexthop via $gw_ip } export -f hx_create hx_destroy() { local vrf_name=$1; shift local if_name=$1; shift local ip_addr=$1; shift local gw_ip=$1; shift ip route del default vrf $vrf_name nexthop via $gw_ip ip neigh del $gw_ip dev $if_name ip address del $ip_addr/24 dev $if_name ip link set dev $if_name down vrf_destroy $vrf_name } h1_create() { hx_create "vrf-h1" $h1 10.1.1.101 10.1.1.1 } h1_destroy() { hx_destroy "vrf-h1" $h1 10.1.1.101 10.1.1.1 } h2_create() { hx_create "vrf-h2" $h2 10.1.2.101 10.1.2.1 } h2_destroy() { hx_destroy "vrf-h2" $h2 10.1.2.101 10.1.2.1 } switch_create() { ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 mcast_snooping 0 # Make sure the bridge uses the MAC address of the local port and not # that of the VxLAN‘s device. ip link set dev br1 address $(mac_get $swp1) ip link set dev br1 up ip link set dev $rp1 up ip address add dev $rp1 192.0.2.1/24 ip route add 10.0.0.2/32 nexthop via 192.0.2.2 ip link add name vx10 type vxlan id 1010 local 10.0.0.1 remote 10.0.0.2 dstport 4789 nolearning noudpcsum tos inherit ttl 100 ip link set dev vx10 up ip link set dev vx10 master br1 bridge vlan add vid 10 dev vx10 pvid untagged ip link add name vx20 type vxlan id 1020 local 10.0.0.1 remote 10.0.0.2 dstport 4789 nolearning noudpcsum tos inherit ttl 100 ip link set dev vx20 up ip link set dev vx20 master br1 bridge vlan add vid 20 dev vx20 pvid untagged ip link set dev $swp1 master br1 ip link set dev $swp1 up bridge vlan add vid 10 dev $swp1 pvid untagged ip link set dev $swp2 master br1 ip link set dev $swp2 up bridge vlan add vid 20 dev $swp2 pvid untagged ip link add name vx4001 type vxlan id 104001 local 10.0.0.1 dstport 4789 nolearning noudpcsum tos inherit ttl 100 ip link set dev vx4001 up ip link set dev vx4001 master br1 bridge vlan add vid 4001 dev vx4001 pvid untagged ip address add 10.0.0.1/32 dev lo # Create SVIs vrf_create "vrf-green" ip link set dev vrf-green up ip link add link br1 name vlan10 up master vrf-green type vlan id 10 ip address add 10.1.1.11/24 dev vlan10 ip link add link vlan10 name vlan10-v up master vrf-green address 00:00:5e:00:01:01 type macvlan mode private ip address add 10.1.1.1/24 dev vlan10-v ip link add link br1 name vlan20 up master vrf-green type vlan id 20 ip address add 10.1.2.11/24 dev vlan20 ip link add link vlan20 name vlan20-v up master vrf-green address 00:00:5e:00:01:01 type macvlan mode private ip address add 10.1.2.1/24 dev vlan20-v ip link add link br1 name vlan4001 up master vrf-green type vlan id 4001 bridge vlan add vid 10 dev br1 self bridge vlan add vid 20 dev br1 self bridge vlan add vid 4001 dev br1 self bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10 bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20 } switch_destroy() { bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20 bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10 bridge vlan del vid 4001 dev br1 self bridge vlan del vid 20 dev br1 self bridge vlan del vid 10 dev br1 self ip link del dev vlan4001 ip link del dev vlan20 ip link del dev vlan10 vrf_destroy "vrf-green" ip address del 10.0.0.1/32 dev lo bridge vlan del vid 20 dev $swp2 ip link set dev $swp2 down ip link set dev $swp2 nomaster bridge vlan del vid 10 dev $swp1 ip link set dev $swp1 down ip link set dev $swp1 nomaster bridge vlan del vid 4001 dev vx4001 ip link set dev vx4001 nomaster ip link set dev vx4001 down ip link del dev vx4001 bridge vlan del vid 20 dev vx20 ip link set dev vx20 nomaster ip link set dev vx20 down ip link del dev vx20 bridge vlan del vid 10 dev vx10 ip link set dev vx10 nomaster ip link set dev vx10 down ip link del dev vx10 ip route del 10.0.0.2/32 nexthop via 192.0.2.2 ip address del dev $rp1 192.0.2.1/24 ip link set dev $rp1 down ip link set dev br1 down ip link del dev br1 } spine_create() { vrf_create "vrf-spine" ip link set dev $rp2 master vrf-spine ip link set dev v1 master vrf-spine ip link set dev vrf-spine up ip link set dev $rp2 up ip link set dev v1 up ip address add 192.0.2.2/24 dev $rp2 ip address add 192.0.3.2/24 dev v1 ip route add 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1 ip route add 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1 } spine_destroy() { ip route del 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1 ip route del 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1 ip address del 192.0.3.2/24 dev v1 ip address del 192.0.2.2/24 dev $rp2 ip link set dev v1 down ip link set dev $rp2 down vrf_destroy "vrf-spine" } ns_h1_create() { hx_create "vrf-h1" w2 10.1.1.102 10.1.1.1 } export -f ns_h1_create ns_h2_create() { hx_create "vrf-h2" w4 10.1.2.102 10.1.2.1 } export -f ns_h2_create ns_switch_create() { ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 mcast_snooping 0 ip link set dev br1 up ip link set dev v2 up ip address add dev v2 192.0.3.1/24 ip route add 10.0.0.1/32 nexthop via 192.0.3.2 ip link add name vx10 type vxlan id 1010 local 10.0.0.2 remote 10.0.0.1 dstport 4789 nolearning noudpcsum tos inherit ttl 100 ip link set dev vx10 up ip link set dev vx10 master br1 bridge vlan add vid 10 dev vx10 pvid untagged ip link add name vx20 type vxlan id 1020 local 10.0.0.2 remote 10.0.0.1 dstport 4789 nolearning noudpcsum tos inherit ttl 100 ip link set dev vx20 up ip link set dev vx20 master br1 bridge vlan add vid 20 dev vx20 pvid untagged ip link add name vx4001 type vxlan id 104001 local 10.0.0.2 dstport 4789 nolearning noudpcsum tos inherit ttl 100 ip link set dev vx4001 up ip link set dev vx4001 master br1 bridge vlan add vid 4001 dev vx4001 pvid untagged ip link set dev w1 master br1 ip link set dev w1 up bridge vlan add vid 10 dev w1 pvid untagged ip link set dev w3 master br1 ip link set dev w3 up bridge vlan add vid 20 dev w3 pvid untagged ip address add 10.0.0.2/32 dev lo # Create SVIs vrf_create "vrf-green" ip link set dev vrf-green up ip link add link br1 name vlan10 up master vrf-green type vlan id 10 ip address add 10.1.1.12/24 dev vlan10 ip link add link vlan10 name vlan10-v up master vrf-green address 00:00:5e:00:01:01 type macvlan mode private ip address add 10.1.1.1/24 dev vlan10-v ip link add link br1 name vlan20 up master vrf-green type vlan id 20 ip address add 10.1.2.12/24 dev vlan20 ip link add link vlan20 name vlan20-v up master vrf-green address 00:00:5e:00:01:01 type macvlan mode private ip address add 10.1.2.1/24 dev vlan20-v ip link add link br1 name vlan4001 up master vrf-green type vlan id 4001 bridge vlan add vid 10 dev br1 self bridge vlan add vid 20 dev br1 self bridge vlan add vid 4001 dev br1 self bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10 bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20 } export -f ns_switch_create ns_init() { ip link add name w1 type veth peer name w2 ip link add name w3 type veth peer name w4 ip link set dev lo up ns_h1_create ns_h2_create ns_switch_create } export -f ns_init ns1_create() { ip netns add ns1 ip link set dev v2 netns ns1 in_ns ns1 ns_init } ns1_destroy() { ip netns exec ns1 ip link set dev v2 netns 1 ip netns del ns1 } __l2_vni_init() { local mac1=$1; shift local mac2=$1; shift local ip1=$1; shift local ip2=$1; shift local dst=$1; shift bridge fdb add $mac1 dev vx10 self master extern_learn static dst $dst vlan 10 bridge fdb add $mac2 dev vx20 self master extern_learn static dst $dst vlan 20 ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 extern_learn ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 extern_learn } export -f __l2_vni_init l2_vni_init() { local h1_ns_mac=$(in_ns ns1 mac_get w2) local h2_ns_mac=$(in_ns ns1 mac_get w4) local h1_mac=$(mac_get $h1) local h2_mac=$(mac_get $h2) __l2_vni_init $h1_ns_mac $h2_ns_mac 10.1.1.102 10.1.2.102 10.0.0.2 in_ns ns1 __l2_vni_init $h1_mac $h2_mac 10.1.1.101 10.1.2.101 10.0.0.1 } __l3_vni_init() { local mac=$1; shift local vtep_ip=$1; shift local host1_ip=$1; shift local host2_ip=$1; shift bridge fdb add $mac dev vx4001 self master extern_learn static dst $vtep_ip vlan 4001 ip neigh add $vtep_ip lladdr $mac nud noarp dev vlan4001 extern_learn ip route add $host1_ip/32 vrf vrf-green nexthop via $vtep_ip dev vlan4001 onlink ip route add $host2_ip/32 vrf vrf-green nexthop via $vtep_ip dev vlan4001 onlink } export -f __l3_vni_init l3_vni_init() { local vlan4001_ns_mac=$(in_ns ns1 mac_get vlan4001) local vlan4001_mac=$(mac_get vlan4001) __l3_vni_init $vlan4001_ns_mac 10.0.0.2 10.1.1.102 10.1.2.102 in_ns ns1 __l3_vni_init $vlan4001_mac 10.0.0.1 10.1.1.101 10.1.2.101 } setup_prepare() { h1=${NETIFS[p1]} swp1=${NETIFS[p2]} swp2=${NETIFS[p3]} h2=${NETIFS[p4]} rp1=${NETIFS[p5]} rp2=${NETIFS[p6]} vrf_prepare forwarding_enable h1_create h2_create switch_create ip link add name v1 type veth peer name v2 spine_create ns1_create l2_vni_init l3_vni_init } cleanup() { pre_cleanup ns1_destroy spine_destroy ip link del dev v1 switch_destroy h2_destroy h1_destroy forwarding_restore vrf_cleanup } ping_ipv4() { ping_test $h1 10.1.2.101 ": local->local vid 10->vid 20" ping_test $h1 10.1.1.102 ": local->remote vid 10->vid 10" ping_test $h2 10.1.2.102 ": local->remote vid 20->vid 20" ping_test $h1 10.1.2.102 ": local->remote vid 10->vid 20" ping_test $h2 10.1.1.102 ": local->remote vid 20->vid 10" } trap cleanup EXIT setup_prepare setup_wait tests_run exit $EXIT_STATUS
标签:udp license host nta rest cal rap ide wait
原文地址:https://www.cnblogs.com/dream397/p/13212971.html