标签:word root compute default mes out 停止 执行 节点
neutron agent-list | grep dhcp-agent
| 60c33247-ffcd-4a0a-bb2f-75535ff56f75 | DHCP agent | controller3 | nova | :-) | True | neutron-dhcp-agent |
| 84a54e6d-f7d5-4f25-910b-5d025aa6aa3b | DHCP agent | controller2 | nova | :-) | True | neutron-dhcp-agent |
| f098e91c-e805-44fc-8d9b-212446b90088 | DHCP agent | controller1 | nova | :-) | True | neutron-dhcp-agent |
neutron dhcp-agent-list-hosting-net 9d2f02e1-5877-4f0a-a5b0-c18fc77018e4 +--------------------------------------+-------------+----------------+-------+ | id | host | admin_state_up | alive | +--------------------------------------+-------------+----------------+-------+ | 60c33247-ffcd-4a0a-bb2f-75535ff56f75 | controller3 | True | :-) | | 84a54e6d-f7d5-4f25-910b-5d025aa6aa3b | controller2 | True | :-) | +--------------------------------------+-------------+----------------+-------+
neutron net-list-on-dhcp-agent 60c33247-ffcd-4a0a-bb2f-75535ff56f75 | grep 9d2f02e1-5877-4f0a-a5b0-c18fc77018e4 | 9d2f02e1-5877-4f0a-a5b0-c18fc77018e4 | nasi_weier | 29823194-5006-4005-8c98-9efd30742e1f 14.14.14.0/24 |
(neutron-dhcp-agent)[neutron@controller2 9d2f02e1-5877-4f0a-a5b0-c18fc77018e4]$ cat leases 1595494258 ac:8d:34:89:ae:ec 14.14.14.4 host-14-14-14-4 * 1595491072 fa:16:3e:14:b8:79 14.14.14.2 host-14-14-14-2 * 1595491072 fa:16:3e:03:42:55 14.14.14.3 host-14-14-14-3 * 1595498290 ac:8d:34:89:b1:5c 14.14.14.7 nasi *
root@controller2:/var/lib/docker/volumes/kolla_logs/_data/neutron# ip netns exec qdhcp-9d2f02e1-5877-4f0a-a5b0-c18fc77018e4 ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ns-2aa0f452-75@if1088: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether fa:16:3e:03:42:55 brd ff:ff:ff:ff:ff:ff link-netnsid 0 inet 14.14.14.3/24 brd 14.14.14.255 scope global ns-2aa0f452-75 valid_lft forever preferred_lft forever inet6 fe80::f816:3eff:fe03:4255/64 scope link valid_lft forever preferred_lft forever root@controller2:/var/lib/docker/volumes/kolla_logs/_data/neutron# ip netns exec qdhcp-9d2f02e1-5877-4f0a-a5b0-c18fc77018e4 ps -elf | grep dnsmasq | grep 9d2f02e1-5877-4f0a-a5b0-c18fc77018e4 5 S nobody 6419 36367 0 80 0 - 2305 poll_s 15:57 ? 00:00:00 dnsmasq --no-hosts --no-resolv --except-interface=lo --pid-file=/var/lib/neutron/dhcp/9d2f02e1-5877-4f0a-a5b0-c18fc77018e4/pid --dhcp-hostsfile=/var/lib/neutron/dhcp/9d2f02e1-5877-4f0a-a5b0-c18fc77018e4/host --addn-hosts=/var/lib/neutron/dhcp/9d2f02e1-5877-4f0a-a5b0-c18fc77018e4/addn_hosts --dhcp-optsfile=/var/lib/neutron/dhcp/9d2f02e1-5877-4f0a-a5b0-c18fc77018e4/opts --dhcp-leasefile=/var/lib/neutron/dhcp/9d2f02e1-5877-4f0a-a5b0-c18fc77018e4/leases --dhcp-match=set:ipxe,175 --bind-interfaces --interface=ns-2aa0f452-75 --dhcp-range=set:tag0,14.14.14.0,static,86400s --dhcp-option-force=option:mtu,1500 --dhcp-lease-max=256 --conf-file=/etc/neutron/dnsmasq.conf --domain=openstacklocal root@controller2:/var/lib/docker/volumes/kolla_logs/_data/neutron#
root@controller3:~# ip netns exec qdhcp-9d2f02e1-5877-4f0a-a5b0-c18fc77018e4 ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ns-5e71e4c4-54@if737: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether fa:16:3e:14:b8:79 brd ff:ff:ff:ff:ff:ff link-netnsid 0 inet 14.14.14.2/24 brd 14.14.14.255 scope global ns-5e71e4c4-54 valid_lft forever preferred_lft forever inet6 fe80::f816:3eff:fe14:b879/64 scope link valid_lft forever preferred_lft forever root@controller3:~# ip netns exec qdhcp-9d2f02e1-5877-4f0a-a5b0-c18fc77018e4 ps -elf | grep dnsmasq | grep 9d2f02e1-5877-4f0a-a5b0-c18fc77018e4 5 S nobody 3882 9633 0 80 0 - 2305 poll_s 15:57 ? 00:00:00 dnsmasq --no-hosts --no-resolv --except-interface=lo --pid-file=/var/lib/neutron/dhcp/9d2f02e1-5877-4f0a-a5b0-c18fc77018e4/pid --dhcp-hostsfile=/var/lib/neutron/dhcp/9d2f02e1-5877-4f0a-a5b0-c18fc77018e4/host --addn-hosts=/var/lib/neutron/dhcp/9d2f02e1-5877-4f0a-a5b0-c18fc77018e4/addn_hosts --dhcp-optsfile=/var/lib/neutron/dhcp/9d2f02e1-5877-4f0a-a5b0-c18fc77018e4/opts --dhcp-leasefile=/var/lib/neutron/dhcp/9d2f02e1-5877-4f0a-a5b0-c18fc77018e4/leases --dhcp-match=set:ipxe,175 --bind-interfaces --interface=ns-5e71e4c4-54 --dhcp-range=set:tag0,14.14.14.0,static,86400s --dhcp-option-force=option:mtu,1500 --dhcp-lease-max=256 --conf-file=/etc/neutron/dnsmasq.conf --domain=openstacklocal root@controller3:~#
(neutron-dhcp-agent)[neutron@controller3 9d2f02e1-5877-4f0a-a5b0-c18fc77018e4]$ ls addn_hosts host interface leases opts pid (neutron-dhcp-agent)[neutron@controller3 9d2f02e1-5877-4f0a-a5b0-c18fc77018e4]$ cat leases 1595495232 1c:ae:cb:eb:92:b6 14.14.14.6 host-14-14-14-6 * 1595491073 fa:16:3e:14:b8:79 14.14.14.2 host-14-14-14-2 * 1595491073 fa:16:3e:03:42:55 14.14.14.3 host-14-14-14-3 * 1595498290 ac:8d:34:89:b1:5c 14.14.14.7 nasi
本节介绍如何对DHCP代理可扩展性和HA使用代理管理(别名代理)和调度程序(别名代理调度程序)扩展。 使用neutron ext-list client命令检查是否启用了这些扩展。 检查代理和agent_scheduler包含在输出中。 $ neutron ext-list -c name -c alias +-----------------+--------------------------+ | alias | name | +-----------------+--------------------------+ | agent_scheduler | Agent Schedulers | | binding | Port Binding | | quotas | Quota management support | | agent | agent | | provider | Provider Network | | router | Neutron L3 Router | | lbaas | Load Balancing service | | extraroute | Neutron Extra Route | +-----------------+--------------------------+ 设置演示 这里写图片描述 主机 描述 OpenStack controller host - controlnode 运行部署虚拟机所需的网络,身份和计算服务。 节点必须至少有一个网络接口连接到管理网络。 注意nova网络不应该运行,因为它被Neutron替代。 HostA 运行nova-compute, the Neutron L2 agent and DHCP agent HostB 同HostA 配置 controlnode: neutron server 1.Neutron 配置文件 /etc/neutron/neutron.conf: [DEFAULT] core_plugin = linuxbridge rabbit_host = controlnode allow_overlapping_ips = True host = controlnode agent_down_time = 5 dhcp_agents_per_network = 1 在上面的配置中,我们使用dhcp_agents_per_network = 1进行演示。 在常规部署中,我们建议将dhcp_agents_per_network设置为多个以匹配部署中DHCP代理的数量。 2.更新 plug-in 配置文件 /etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini: [vlans] tenant_network_type = vlan network_vlan_ranges = physnet1:1000:2999 [database] connection = mysql://root:root@127.0.0.1:3306/neutron_linux_bridge retry_interval = 2 [linux_bridge] physical_interface_mappings = physnet1:eth0 HostA and HostB: L2 agent 1.Neutron 配置文件 /etc/neutron/neutron.conf: [DEFAULT] rabbit_host = controlnode rabbit_password = openstack # host = HostB on hostb host = HostA 5 2.更新 plug-in 配置文件 /etc/neutron/plugins/linuxbridge/linuxbridge_conf.ini: [vlans] tenant_network_type = vlan network_vlan_ranges = physnet1:1000:2999 [database] connection = mysql://root:root@127.0.0.1:3306/neutron_linux_bridge retry_interval = 2 [linux_bridge] physical_interface_mappings = physnet1:eth0 3.更新 the nova 配置文件 /etc/nova/nova.conf: [DEFAULT] use_neutron=True firewall_driver=nova.virt.firewall.NoopFirewallDriver [neutron] admin_username=neutron admin_password=servicepassword admin_auth_url=http://controlnode:35357/v2.0/ auth_strategy=keystone admin_tenant_name=servicetenant url=http://100.1.1.10:9696/ 11 HostA and HostB: DHCP agent 更新 DHCP 配置文件 /etc/neutron/dhcp_agent.ini: [DEFAULT] interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver 1 2 演示的先决条件 需要管理员角色才能使用代理管理和调度程序扩展。 确保在具有管理员角色的项目下运行以下命令。 要进行实验,您需要VM和Neutron网络: $ nova list +--------------------------------------+-----------+--------+---------------+ | ID | Name | Status | Networks | +--------------------------------------+-----------+--------+---------------+ | c394fcd0-0baa-43ae-a793-201815c3e8ce | myserver1 | ACTIVE | net1=10.0.1.3 | | 2d604e05-9a6c-4ddb-9082-8a1fbdcc797d | myserver2 | ACTIVE | net1=10.0.1.4 | | c7c0481c-3db8-4d7a-a948-60ce8211d585 | myserver3 | ACTIVE | net1=10.0.1.5 | +--------------------------------------+-----------+--------+---------------+ $ neutron net-list +--------------------------------------+------+--------------------------------------+ | id | name | subnets | +--------------------------------------+------+--------------------------------------+ | 89dca1c6-c7d4-4f7a-b730-549af0fb6e34 | net1 | f6c832e3-9968-46fd-8e45-d5cf646db9d1 | +--------------------------------------+------+--------------------------------------+ 管理Neutron部署中的代理 1.列出所有代理 $ neutron agent-list +--------------------------------------+--------------------+-------+-------+----------------+ | id | agent_type | host | alive | admin_state_up | +--------------------------------------+--------------------+-------+-------+----------------+ | 1b69828d-6a9b-4826-87cd-1757f0e27f31 | Linux bridge agent | HostA | :-) | True | | a0c1c21c-d4f4-4577-9ec7-908f2d48622d | DHCP agent | HostA | :-) | True | | ed96b856-ae0f-4d75-bb28-40a47ffd7695 | Linux bridge agent | HostB | :-) | True | | f28aa126-6edb-4ea5-a81e-8850876bc0a8 | DHCP agent | HostB | :-) | True | +--------------------------------------+--------------------+-------+-------+----------------+ 每个支持这些扩展的代理在启动时都会向neutron服务器注册。 输出显示四个代理的信息。 活动字段显示:-)如果代理在neutron.conf文件中的agent_down_time选项定义的时间段内报告其状态。 否则活着是xxx。 2.列出托管指定网络的DHCP代理: $ neutron dhcp-agent-list-hosting-net net1 +--------------------------------------+-------+----------------+-------+ | id | host | admin_state_up | alive | +--------------------------------------+-------+----------------+-------+ | a0c1c21c-d4f4-4577-9ec7-908f2d48622d | HostA | True | :-) | +--------------------------------------+-------+----------------+-------+ 3.列出由给定DHCP代理托管的网络: 此命令将显示给定dhcp代理正在管理的网络。 $ neutron net-list-on-dhcp-agent a0c1c21c-d4f4-4577-9ec7-908f2d48622d +--------------------------------------+------+--------------------------------------------------+ | id | name | subnets | +--------------------------------------+------+--------------------------------------------------+ | 89dca1c6-c7d4-4f7a-b730-549af0fb6e34 | net1 | f6c832e3-9968-46fd-8e45-d5cf646db9d1 10.0.1.0/24 | +--------------------------------------+------+--------------------------------------------------+ 4.显示代理详细信息。 neutron agent-show命令显示指定代理程序的详细信息: $ neutron agent-show a0c1c21c-d4f4-4577-9ec7-908f2d48622d +---------------------+--------------------------------------------------------+ | Field | Value | +---------------------+--------------------------------------------------------+ | admin_state_up | True | | agent_type | DHCP agent | | alive | False | | binary | neutron-dhcp-agent | | configurations | { | | | "subnets": 1, | | | "dhcp_driver": "neutron.agent.linux.dhcp.Dnsmasq", | | | "networks": 1, | | | "dhcp_lease_time": 120, | | | "ports": 3 | | | } | | created_at | 2013-03-16T01:16:18.000000 | | description | | | heartbeat_timestamp | 2013-03-17T01:37:22.000000 | | host | HostA | | id | 58f4ce07-6789-4bb3-aa42-ed3779db2b03 | | started_at | 2013-03-16T06:48:39.000000 | | topic | dhcp_agent | +---------------------+--------------------------------------------------------+ 23 在此输出中,heartbeat_timestamp是neutron服务器上的时间。 此扩展程序无需同步所有代理程序,即可正常运行。 配置描述了代理程序或运行时数据的静态配置。 此代理是DHCP代理,它承载一个网络,一个子网和三个端口。 不同类型的代理显示不同的细节。 以下输出显示了Linux网桥代理的信息: $ neutron agent-show ed96b856-ae0f-4d75-bb28-40a47ffd7695 +---------------------+--------------------------------------+ | Field | Value | +---------------------+--------------------------------------+ | admin_state_up | True | | binary | neutron-linuxbridge-agent | | configurations | { | | | "physnet1": "eth0", | | | "devices": "4" | | | } | | created_at | 2013-03-16T01:49:52.000000 | | description | | | disabled | False | | group | agent | | heartbeat_timestamp | 2013-03-16T01:59:45.000000 | | host | HostB | | id | ed96b856-ae0f-4d75-bb28-40a47ffd7695 | | topic | N/A | | started_at | 2013-03-16T06:48:39.000000 | | type | Linux bridge agent | +---------------------+--------------------------------------+ 21 管理网络到DHCP代理的分配 单个网络可以分配给多个DHCP代理,一个DHCP代理可以承载多个网络。 您可以向DHCP代理添加网络,并从中删除一个。 1.默认计划。 当您使用一个端口创建网络时,网络将被调度为活动的DHCP代理。 如果许多活动DHCP代理正在运行,请随机选择一个。 您可以设计更复杂的调度算法与nova-schedule相同的方式。 $ neutron net-create net2 $ neutron subnet-create net2 9.0.1.0/24 --name subnet2 $ neutron port-create net2 $ neutron dhcp-agent-list-hosting-net net2 +--------------------------------------+-------+----------------+-------+ | id | host | admin_state_up | alive | +--------------------------------------+-------+----------------+-------+ | a0c1c21c-d4f4-4577-9ec7-908f2d48622d | HostA | True | :-) | +--------------------------------------+-------+----------------+-------+ 它分配给HostA上的DHCP代理。 如果要通过dnsmasq命令验证行为,则必须为网络创建子网,因为DHCP代理仅在存在DHCP时启动dnsmasq服务。 2.为DHCP代理分配网络 要添加另一个DHCP代理来托管网络,请运行以下命令: $ neutron dhcp-agent-network-add f28aa126-6edb-4ea5-a81e-8850876bc0a8 net2 Added network net2 to dhcp agent $ neutron dhcp-agent-list-hosting-net net2 +--------------------------------------+-------+----------------+-------+ | id | host | admin_state_up | alive | +--------------------------------------+-------+----------------+-------+ | a0c1c21c-d4f4-4577-9ec7-908f2d48622d | HostA | True | :-) | | f28aa126-6edb-4ea5-a81e-8850876bc0a8 | HostB | True | :-) | +--------------------------------------+-------+----------------+-------+ 9 两个DHCP代理都托管net2网络。 3.从指定的DHCP代理中删除网络。 此命令是上一个命令的同级命令。 从HostA的DHCP代理中删除net2: $ neutron dhcp-agent-network-remove a0c1c21c-d4f4-4577-9ec7-908f2d48622d net2 Removed network net2 to dhcp agent $ neutron dhcp-agent-list-hosting-net net2 +--------------------------------------+-------+----------------+-------+ | id | host | admin_state_up | alive | +--------------------------------------+-------+----------------+-------+ | f28aa126-6edb-4ea5-a81e-8850876bc0a8 | HostB | True | :-) | +--------------------------------------+-------+----------------+-------+ 可以看到只有HostB的DHCP代理托管net2网络。 DHCP代理的HA 在net2上引导虚拟机。 让两个DHCP代理主机net2。 依次失败代理查看VM是否仍然可以获得所需的IP。 1.在net2上启动虚拟机 $ neutron net-list +--------------------------------------+------+--------------------------------------------------+ | id | name | subnets | +--------------------------------------+------+--------------------------------------------------+ | 89dca1c6-c7d4-4f7a-b730-549af0fb6e34 | net1 | f6c832e3-9968-46fd-8e45-d5cf646db9d1 10.0.1.0/24 | | 9b96b14f-71b8-4918-90aa-c5d705606b1a | net2 | 6979b71a-0ae8-448c-aa87-65f68eedcaaa 9.0.1.0/24 | +--------------------------------------+------+--------------------------------------------------+ $ nova boot --image tty --flavor 1 myserver4 --nic net-id=9b96b14f-71b8-4918-90aa-c5d705606b1a ... $ nova list +--------------------------------------+-----------+--------+---------------+ | ID | Name | Status | Networks | +--------------------------------------+-----------+--------+---------------+ | c394fcd0-0baa-43ae-a793-201815c3e8ce | myserver1 | ACTIVE | net1=10.0.1.3 | | 2d604e05-9a6c-4ddb-9082-8a1fbdcc797d | myserver2 | ACTIVE | net1=10.0.1.4 | | c7c0481c-3db8-4d7a-a948-60ce8211d585 | myserver3 | ACTIVE | net1=10.0.1.5 | | f62f4731-5591-46b1-9d74-f0c901de567f | myserver4 | ACTIVE | net2=9.0.1.2 | +--------------------------------------+-----------+--------+---------------+ 19 确保两个托管net2的DHCP代理: 使用先前的命令将网络分配给代理。 $ neutron dhcp-agent-list-hosting-net net2 +--------------------------------------+-------+----------------+-------+ | id | host | admin_state_up | alive | +--------------------------------------+-------+----------------+-------+ | a0c1c21c-d4f4-4577-9ec7-908f2d48622d | HostA | True | :-) | | f28aa126-6edb-4ea5-a81e-8850876bc0a8 | HostB | True | :-) | +--------------------------------------+-------+----------------+-------+ 要测试DHCP代理的HA: 1.登录myserver4虚拟机,执行udhcpc,dhclient或其他DHCP客户端。 2.停止HostA上的DHCP代理。 除了停止neutron-dhcp-agent二进制文件,必须停止dnsmasq进程。 3.在虚拟机中运行DHCP客户端,以查看它是否可以获得所需的IP。 4.停止HostB上的DHCP代理。 5.在VM中运行udhcpc; 它不能得到想要的IP。 6.在HostB上启动DHCP代理。 VM再次获取所需的IP。 禁用删除一个代理 如果计划进行系统硬件或软件升级,管理员可能需要禁用代理。 一些支持调度的代理还支持禁用和启用代理,例如L3和DHCP代理。 禁用代理后,调度程序不会向代理调度新资源。 禁用代理后,您可以安全地删除代理。 即使在禁用代理后,也会继续分配代理上的资源。 在删除代理之前,请确保删除代理上的资源。 在停止HostA之前禁用HostA上的DHCP代理: $ neutron agent-update a0c1c21c-d4f4-4577-9ec7-908f2d48622d --admin-state-up False $ neutron agent-list +--------------------------------------+--------------------+-------+-------+----------------+ | id | agent_type | host | alive | admin_state_up | +--------------------------------------+--------------------+-------+-------+----------------+ | 1b69828d-6a9b-4826-87cd-1757f0e27f31 | Linux bridge agent | HostA | :-) | True | | a0c1c21c-d4f4-4577-9ec7-908f2d48622d | DHCP agent | HostA | :-) | False | | ed96b856-ae0f-4d75-bb28-40a47ffd7695 | Linux bridge agent | HostB | :-) | True | | f28aa126-6edb-4ea5-a81e-8850876bc0a8 | DHCP agent | HostB | :-) | True | +--------------------------------------+--------------------+-------+-------+----------------+ 在HostA上停止DHCP代理后,可以通过以下命令删除它: $ neutron agent-delete a0c1c21c-d4f4-4577-9ec7-908f2d48622d Deleted agent: a0c1c21c-d4f4-4577-9ec7-908f2d48622d $ neutron agent-list +--------------------------------------+--------------------+-------+-------+----------------+ | id | agent_type | host | alive | admin_state_up | +--------------------------------------+--------------------+-------+-------+----------------+ | 1b69828d-6a9b-4826-87cd-1757f0e27f31 | Linux bridge agent | HostA | :-) | True | | ed96b856-ae0f-4d75-bb28-40a47ffd7695 | Linux bridge agent | HostB | :-) | True | | f28aa126-6edb-4ea5-a81e-8850876bc0a8 | DHCP agent | HostB | :-) | True | +--------------------------------------+--------------------+-------+-------+----------------+ 默认开启DHCP高可用性 您可以通过在文件/etc/neutron/neutron.conf中设置以下配置选项来控制分配给网络的DHCP代理的默认数量。 dhcp_agents_per_network = 3
标签:word root compute default mes out 停止 执行 节点
原文地址:https://www.cnblogs.com/dream397/p/13362477.html