# dmesg 
Linux version 2.4.24-uc0-iDirect0 (root@EmbEserver75) (gcc version 3.3.2) #1 Wed Jun 15 12:44:25 EDT 2011
CPU: XScale-IXP4xx/IXC11xx revision 2
Machine: iDirect Phoenix Platform
alloc_bootmem_low
memtable_init
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
On node 0 totalpages: 32768
zone(0): 16384 pages.
zone(1): 16384 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS1,9600 root=/dev/mtdblock2
Relocating machine vectors to 0xffff0000
Calibrating delay loop... 532.48 BogoMIPS
Memory: 128MB = 128MB total
Memory: 127388KB available (1680K code, 477K data, 72K init)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ixp425_init: Window Size = 33554432
IXP425 Flash: Found 1 x16 devices at 0x1000000 in 16-bit mode
cfi_cmdset_0001: Suspend erase on write disabled.
0: offset=0x0,size=0x20000,blocks=128
1: offset=0x1000000,size=0x20000,blocks=128
Using buffer write method
Creating 6 MTD partitions on "IXP425 Flash":
0x00000000-0x00040000 : "RedBoot"
0x00060000-0x00160000 : "Linux"
0x00160000-0x01fe0000 : "RootFS"
0x01fe0000-0x01fff000 : "FIS directory"
mtd: partition "FIS directory" doesn‘t end on an erase block -- force read-only
0x01fff000-0x02000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn‘t start on an erase block boundary -- force read-only
0x01fe0000-0x02000000 : "FIS Overlap"
Board has 65nm flash part
pktgen.c: v1.3: Packet Generator for packet performance testing.
pktgen: Error: your machine does not have working cycle counter.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (1024 buckets, 8192 max) - 320 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded
ip_nat_pptp version $Revision: 1.1.1.1 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
registering ipv6 mark target
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Other stuff added by David S. Miller <davem@redhat.com>
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 72K
Module init.
ixp425_eth: 
Initializing IXP425 NPE Ethernet driver software v. 0.1.9 (1_4)
ixp425_eth: ixp0 is using the PHY at address 0
ixp425_eth: ixp1 is using the PHY at address 1
ixp425_eth: CPU clock speed (approx) = 532 MHz
fpga: Feb  5 2016 01:46:43
cpld: Feb  5 2016 01:46:41
rawio: Feb  5 2016 01:46:56
fpga: Exit
fpga: Feb  5 2016 01:46:43
ixp0: no IPv6 routers present
i2c-dev.o: Registered ‘FPGA-I2C Adapter‘ as minor 0
i2c-core.o: adapter FPGA-I2C Adapter registered as adapter 0.
i2c-opencore: __DATE__   __TIME__  
i2c-core.o: driver stv0900 registered.
i2c-core.o: client [stv0900] registered to adapter [FPGA-I2C Adapter](pos. 0).
stv0900: Feb  5 2016 01:46:58
i2c-core.o: driver stb6100 registered.
i2c-core.o: client [stb6100] registered to adapter [FPGA-I2C Adapter](pos. 1).
stb6100: Feb  5 2016 01:46:57
PCI: enabling device 00:0e.0 (0000 -> 0002)
ixp425_eth: ixp0: Entering promiscuous mode
device ixp0 entered promiscuous mode

# cat /proc/cpuinfo 
Processor    : XScale-IXP4xx/IXC11xx rev 2 (v5b)
BogoMIPS    : 532.48
Features    : swp half thumb fastmult edsp 

Hardware    : iDirect Phoenix Platform
Revision    : 0000
Serial        : 0000000000000000
# 
# cat /proc/meminfo 
        total:    used:    free:  shared: buffers:  cached:
Mem:  130519040 30400512 100118528        0        0 15392768
Swap:        0        0        0
MemTotal:       127460 kB
MemFree:         97772 kB
MemShared:           0 kB
Buffers:             0 kB
Cached:          15032 kB
SwapCached:          0 kB
Active:           7948 kB
Inactive:         8736 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       127460 kB
LowFree:         97772 kB
SwapTotal:           0 kB
SwapFree:            0 kB
# 
# cat /etc/idirect-release 
iDirect Linux-BSP Release 15.0.5.1
# 
# uname -a
Linux iDirect 2.4.24-uc0-iDirect0 #1 Wed Jun 15 12:44:25 EDT 2011 armv5b unknown
# 

# /usr/sbin/falcon --version
Using OpenSSL 1.0.1j-fips 15 Oct 2014
Starting Falcon...
Code Version: 15.0.5.1
Build Comment: Final_Build
Build Label: IDS-15_0_5_1-Build-11
~~~~~~~~
falcon BUILD INFO:  built Fri Feb 5 02:14:37 EST 2016  by root  using g++ version 3.3 on Linux cm-build-rh5101-1 2.6.18-371.3.1.el5PAE #1 SMP Mon Nov 11 03:29:00 EST 2013 i686 i686 i386 GNU/Linux 
~~~~~~~~
# 
# ls -alh /etc/idirect/falcon/
drwxrwxr-x    1 root     root            0 Jan  1 00:09 .
drwxrwxr-x    1 root     root            0 Jan  1 00:07 ..
-rw-r--r--    1 root     root         5.2k Jan  1 00:09 falcon.opt
-rw-r--r--    1 root     root        10.5k Jan  1 00:17 falcon.opt.old
-rwxr--r--    1 root     root           71 Jan  1 00:09 falcon_state.xml
# 
# cat /etc/idirect/falcon/falcon.opt
[ANTENNA]
	addr = 172.26.102.18
	connect_timeout = 30
	dedicated_interface = ixp0
	manufacturer = OpenAMIP
	max_skew = 90.000000
	model = OpenAMIP
	port = 4002

[BEAMS]
	beam_123 = MarineSat Network S2
	maxbeam = 123

[BEAMS_LOCAL]
	inhibit_tx_ifzero = 0
	rxonly_enabled = 0                                # !! Custom Parameter !!

[BTP]
	device_mode = tdma
	device_name = btp
	device_path = /dev

[BTP_REQ]
	device_mode = tdma
	device_name = btp_req
	device_path = /dev

[COMPRESSION]
	Threshold = 90

[DEBUG]
	cpu_util_test_enabled = 0

[DHCP_149]
	dhcp_dns_server2_ip = 0.0.0.0
	dhcp_dns_server_ip = 10.188.147.1
	dhcp_gateway_ip = 10.188.147.1
	dhcp_lease_range = 10.188.147.50-10.188.147.254
	dhcp_lease_seconds = 43200
	dhcp_mode = 1

[DNS_149]
	dns_cache_size = 100
	dns_cache_ttl_max = 86400
	dns_cache_ttl_min = 300
	dns_enable = 1
	dns_forward_queue_size = 1000
	dns_forward_timeout = 2000
	dns_primary_server_addr = 202.106.0.20
	dns_primary_server_name = ns1
	dns_secondary_server_addr = 114.114.114.114
	dns_secondary_server_name = ns2

[DVBS2]
	frame_length = 125.000000
	frame_size = short
	mode = acm
	ncr_interval = 3375000
	pilot = 1
	rc_roll_off = 0.200000

[ENC]
	auth_level_required = 0
	enc_enabled = 0
	enc_layer_enabled = 0
	enc_mode = 0
	peer_mode = 1

[ETH0]
	interface = ixp0
	phy_count = 1

[ETH0_1]
	address = 172.26.102.17
	netmask = 255.255.255.248
	rip_enabled = 0
	web_server_enabled = 0

[ETH0_149]
	address = 10.188.147.1
	group1 = 225.1.2.1
	netmask = 255.255.255.0
	rip_enabled = 0
	web_server_enabled = 0

[FREQ_TRANS]
	down_translation = 9750.000000
	up_translation = 12800.000000

[GUI_SERVER_PROXY]
	port = 14599

[LAN]
	lan_gw_ip = 0.0.0.0
	lan_ip = 172.26.102.17
	lan_subnet_ip = 255.255.255.248

[MAPSERVER_0]
	hostname = 172.16.126.3
	port = 5003

[MOBILE]
	gps_input = 2
	init_tx_power_offset = 0.000000
	is_mobile = 1
	latlong_fail_interval = 10
	latlong_interval = 300
	tx_handshake_enabled = 0

[MODEM_INSTALLATION]
	reflector_offset_angle = 0.000000
	remote_lat = 0.000000
	remote_long = 0.000000
	spacecraft_long = 87.500000

[MODEM_PARAMETERS]
	ref_carrier_fec_block_size = 170
	ref_carrier_modcod_coding_rate = 2
	ref_carrier_modcod_modulation = 1
	ref_carrier_symbol_rate = 468000.000000
	rx_acqrange = 70000
	rx_diff = 0
	rx_freq = 1441000000
	rx_mode = 2
	rx_only = 0
	rx_scram = 1
	rx_specinv = 0
	rx_symrate = 8333000.000000
	tx_bitrate = 1
	tx_power_in_dbm = -20.000000
	tx_specinv = 0

[NET_ENC]
	id = 3
	is_encrypted = 0

[NMS]
	broadcast_ip = 172.16.126.5
	download_monitor_credentials = 1
	download_monitor_group = 239.192.0.0
	download_monitor_port = 9000
	event_server_ip = 172.16.126.5
	event_server_port = 2860
	generated_by = NMS-15.0.5
	is_nms_managed = 1
	keep_alive_port_number = 2860
	NRD_remote_status_port_number = 2859
	NRD_server_ip = 172.16.126.4
	server_ip = 172.16.126.5
	service_monitor_interval = 1000
	timeout = 20000

[ODU]
	lnb_dc_voltage = 13
	lnb_tone_enable = 0
	music_present = 0
	odu_disable_tx_pwm = 0
	odu_rx_10_mhz = 0
	odu_rx_dc_power = 1
	odu_tx_10_mhz = 1
	odu_tx_clk_ref = 10
	odu_tx_dc_power = 1

[OOB]
	mem_high_percent = 90
	mem_low_percent = 75

[OPTIONS_FILE]
	carrier_type = 0
	code_version = 15.0.5.4
	did = 117673037
	disable_options_flash_command = 0
	generated_by = NMS-15.0.5
	is_mesh = 0
	mobile_remote_type = 1
	modem_hardware = X5
	modem_sn = 232525
	modem_type = Remote
	product_mode = dvbs2
	upstream_product_mode = idirect_tdma

[POWER_MANAGEMENT]
	enable = 0
	sleep_timeout = 0

[ROUTE_149_0]
	gateway = 0.0.0.0
	interface = sat0
	metric = 1
	netmask = 0.0.0.0
	network = 0.0.0.0

[ROUTE_1_0]
	gateway = 0.0.0.0
	interface = sat0
	metric = 1
	netmask = 0.0.0.0
	network = 0.0.0.0

[RX1]
	device_mode = scpc
	device_name = rx1
	device_path = /dev

[SAT0_1]
	address = 10.252.102.17
	netmask = 255.255.255.0
	rip_enabled = 0
	web_server_enabled = 0

[SAT0_149]
	address = 10.252.102.17
	netmask = 255.255.255.0
	rip_enabled = 0
	web_server_enabled = 0

[SATELLITE]
	channelname = MarineSat Network S2
	hunt_bandwidth = 10.000000
	hunt_frequency = 1441.000000
	longitude = 87.500000
	max_lat = 0.000000
	max_skew = 90.000000
	min_look_angle = 0.000000
	name = Chinasat 12
	noise_reference_frequency = 0.000000
	pol_skew = 0.000000
	polarity = V
	rx_lcl_osc = 9750.000000
	skew_margin = 90.000000
	tx_bandwidth = 0.500000
	tx_frequency = 1091.780000
	tx_lcl_osc = 12800.000000
	tx_polarity = H

[SECURITY]
	admin_password = $idi3$.5fQ65$/njZwHXxJa9NQtOAi.N8bPcgOdRrOH79f38xJIZrdmeP3K9YTU/Zj1QGI0kIfLt6HgXDkLlNir3GJqHMCaTFa6
	os_password = $1$0CppNk$VY2vgnKsOnee79OI1tgOI/
	password = $idi3$1Z3fZ5$/7NGF5kb029RzILehP2NV3sjkfu9Zb3QPfb69shTneOJi1i6ZuSdQGoaRAYZ3Tn2WTqbwiEIv8yjw3/3dZYdkE

[SOF]
	device_mode = tdma
	device_name = sof
	device_path = /dev

[SYSTEM_TRAY]
	interval = 5000
	mode = 1
	port = 2859
	server = 172.16.126.4
	service_monitor_group = 239.255.255.1
	service_monitor_port = 9001

[TDMA]
	tx_watchdog_timeout_in_frames = 2

[TX]
	device_mode = tdma
	device_name = tx
	device_path = /dev

[TX_SOF]
	device_mode = tdma
	device_name = tx_sof
	device_path = /dev

[UCP]
	max_power_level_in_db = -15.000000
	power_uplink_control_processing = 1

[UDP]
	force_rtp_fullheader = 1
	force_udp_fullheader = 1
	max_hdr_comp_packet_size = 180
	passthru = 1
	payload_comp = 0

[VLAN]
	mode = 1
	vid = 149

 
# 
#