标签：dump pac port database moni lfs exe color ber
注意 gitlab版本一定要gitlab/gitlab-ee:12.5.0-ee.0
gitlab迁移
迁移的整体思路是：
1、在新服务器上安装相同版本的gitlab
2、将备份生成的备份文件发送到新服务器的相同目录下
这里在12.5.0-ee.0`的机器上安装了相同版本的gitlab并能正常运行使用
docker pull gitlab/gitlab-ee:12.5.0-ee.0
docker run -d --name gitlab -p 7023:22 -p 7001:80 -p 7444:443 -v /home/gitlab/conf:/etc/gitlab -v /home/gitlab/logs:/var/log/gitlab -v /home/gitlab/data:/var/opt/gitlab gitlab/gitlab-ee:12.5.0-ee.0使用wget localhost:7000检测是否可以用
可以通过/etc/gitlab/gitlab.rb配置文件来修改默认存放备份文件的目录
[root@code-server ~]# vim /etc/gitlab/gitlab.rb
gitlab_rails[‘manage_backup_path‘] = true
gitlab_rails[‘backup_path‘] = "/data/gitlab/backups" //gitlab备份目录
gitlab_rails[‘backup_archive_permissions‘] = 0644 //生成的备份文件权限
gitlab_rails[‘backup_keep_time‘] = 7776000 //备份保留天数为3个月（即90天，这里是7776000秒）
[root@code-server ~]# mkdir -p /data/gitlab/backups
[root@code-server ~]# chown -R git.git /data/gitlab/backups
[root@code-server ~]# chmod -R 777 /data/gitlab/backups
如上设置了gitlab备份目录路径为/data/gitlab/backups，最后使用下面命令重载gitlab配置文件，是上述修改生效！
root@code-server ~]# gitlab-ctl reconfigure
备份时需要保持gitlab处于正常运行状态，直接执行gitlab-rake gitlab:backup:create进行备份
使用以上命令会在/var/opt/gitlab/backups目录下创建一个名称类似为1530156812_2018_06_28_10.8.4_gitlab_backup.tar的压缩包, 这个压缩包就是Gitlab整个的完整部分, 其中开头的1530156812_2018_06_28_10.8.4是备份创建的日期
docker exec -t gitlab gitlab-rake gitlab:backup:create
红字部分表示 gitlab.rb 和 gitlab-secrets.json 两个文件包含敏感信息。未被备份到备份文件中。需要手动备份。
备份tar包一定要放到备份路径下。恢复是删除原有数据，恢复备份tar包中的数据。
如果是在其他服务器恢复备份，一定要记得将 gitlab.rb 和 gitlab-secrets.json 手动复制到相应路径下。
gitlab.rb路径：/etc/gitlab/gitlab.rb
gitlab-secrets.json路径：/etc/gitlab/gitlab-secrets.json
docker exec -t 容器名 ls -lh /var/opt/gitlab/backups/
手动备份gitlab
[root@code-server backups]# gitlab-rake gitlab:backup:create
Dumping database ...
Dumping PostgreSQL database gitlabhq_production ... [DONE]
done
Dumping repositories ...
* treesign/treesign ... [DONE]
* gateway/gateway ... [DONE]
* treesign/treesign-doc ... [SKIPPED]
* qwsign/qwsign ... [DONE]
* qwsign/qwsign-doc ... [DONE]
* test/test ... [DONE]
done
Dumping uploads ...
done
Dumping builds ...
done
Dumping artifacts ...
done
Dumping pages ...
done
Dumping lfs objects ...
done
Dumping container registry images ...
[DISABLED]
Creating backup archive: 1510471890_2021_03_17_12.5.0_gitlab_backup.tar ... done
Uploading backup archive to remote storage ... skipped
Deleting tmp directories ... done
done
done
Deleting old backups ... done. (0 removed)
scp /var/opt/gitlab/backups/`版本号`_gitlab_backup.tar root@目标服务器id地址:/home
docker cp /home/版本号_gitlab_backup.tar 容器名:/var/opt/gitlab/backups/
以下需要进入容器,如果不进入需要加上前缀 docker exec -t 容器名
如: docker exec -t 容器名 命令
给备份文件赋予权限
chmod 777 /var/opt/gitlab/backups/版本号_gitlab_backup.tar
GItlab只能还原到与备份文件相同的gitlab版本。
假设在上面gitlab备份之前创建了test项目，然后不小心误删了test项目，现在就进行gitlab恢复操作：
1）停止相关数据连接服务
[root@code-server ~]# cd /var/opt/gitlab/backups/
[root@code-server backups]# gitlab-ctl stop unicorn
ok: down: unicorn: 0s, normally up
[root@code-server backups]# gitlab-ctl stop sidekiq
ok: down: sidekiq: 1s, normally up
[root@code-server backups]# gitlab-ctl status
run: gitaly: (pid 98087) 1883s; run: log: (pid 194202) 163003s
run: gitlab-monitor: (pid 98101) 1883s; run: log: (pid 194363) 163002s
run: gitlab-workhorse: (pid 98104) 1882s; run: log: (pid 194362) 163002s
run: logrotate: (pid 98117) 1882s; run: log: (pid 5793) 160832s
run: nginx: (pid 98123) 1881s; run: log: (pid 194359) 163002s
run: node-exporter: (pid 98167) 1881s; run: log: (pid 194360) 163002s
run: postgres-exporter: (pid 98173) 1881s; run: log: (pid 194204) 163003s
run: postgresql: (pid 98179) 1880s; run: log: (pid 194365) 163002s
run: prometheus: (pid 98187) 1880s; run: log: (pid 194364) 163002s
run: redis: (pid 98230) 1879s; run: log: (pid 194358) 163002s
run: redis-exporter: (pid 98234) 1879s; run: log: (pid 194208) 163003s
down: sidekiq: 8s, normally up; run: log: (pid 194437) 163001s
down: unicorn: 21s, normally up; run: log: (pid 194443) 163001s
2）现在通过之前的备份文件进行恢复（必须要备份文件放到备份路径下，默认的是/var/opt/gitlab/backups）
[root@code-server backups]# pwd
/var/opt/gitlab/backups
[root@code-server backups]# ll
total 244
-rw-r--r-- 1 git git 245760 Nov 12 15:33 1510472027_2017_11_12_9.4.5_gitlab_backup.tar
Gitlab的恢复操作会先将当前所有的数据清空，然后再根据备份数据进行恢复
[root@code-server backups]# gitlab-rake gitlab:backup:restore BACKUP=1510472027_2017_11_12_9.4.5(版本号)
Unpacking backup ... done
Before restoring the database we recommend removing all existing
tables to avoid future upgrade problems. Be aware that if you have
custom tables in the GitLab database these tables and all data will be
removed.
Do you want to continue (yes/no)?
........
ALTER TABLE
ALTER TABLE
ALTER TABLE
ALTER TABLE
WARNING: no privileges were granted for "public"
GRANT
[DONE]
done
Restoring repositories ...
* treesign/treesign ... [DONE]
* gateway/gateway ... [DONE]
* treesign/treesign-doc ... [DONE]
* qwsign/qwsign ... [DONE]
* qwsign/qwsign-doc ... [DONE]
* test/test ... [DONE]
Put GitLab hooks in repositories dirs [DONE]
done
Restoring uploads ...
done
Restoring builds ...
done
Restoring artifacts ...
done
Restoring pages ...
done
Restoring lfs objects ...
done
This will rebuild an authorized_keys file.
You will lose any data stored in authorized_keys file.
Do you want to continue (yes/no)? yes
Deleting tmp directories ... done
done
done
[root@code-server backups]#
最后再次启动Gitlab
[root@code-server backups]# gitlab-ctl start
ok: run: gitaly: (pid 98087) 2138s
ok: run: gitlab-monitor: (pid 98101) 2138s
ok: run: gitlab-workhorse: (pid 98104) 2137s
ok: run: logrotate: (pid 98117) 2137s
ok: run: nginx: (pid 98123) 2136s
ok: run: node-exporter: (pid 98167) 2136s
ok: run: postgres-exporter: (pid 98173) 2136s
ok: run: postgresql: (pid 98179) 2135s
ok: run: prometheus: (pid 98187) 2135s
ok: run: redis: (pid 98230) 2134s
ok: run: redis-exporter: (pid 98234) 2134s
ok: run: sidekiq: (pid 104494) 0s
ok: run: unicorn: (pid 104497) 1s
[root@code-server backups]# gitlab-ctl status
run: gitaly: (pid 98087) 2142s; run: log: (pid 194202) 163262s
run: gitlab-monitor: (pid 98101) 2142s; run: log: (pid 194363) 163261s
run: gitlab-workhorse: (pid 98104) 2141s; run: log: (pid 194362) 163261s
run: logrotate: (pid 98117) 2141s; run: log: (pid 5793) 161091s
run: nginx: (pid 98123) 2140s; run: log: (pid 194359) 163261s
run: node-exporter: (pid 98167) 2140s; run: log: (pid 194360) 163261s
run: postgres-exporter: (pid 98173) 2140s; run: log: (pid 194204) 163262s
run: postgresql: (pid 98179) 2139s; run: log: (pid 194365) 163261s
run: prometheus: (pid 98187) 2139s; run: log: (pid 194364) 163261s
run: redis: (pid 98230) 2138s; run: log: (pid 194358) 163261s
run: redis-exporter: (pid 98234) 2138s; run: log: (pid 194208) 163262s
run: sidekiq: (pid 104494) 4s; run: log: (pid 194437) 163260s
run: unicorn: (pid 104497) 4s; run: log: (pid 194443) 163260s
恢复命令完成后，可以check检查一下恢复情况
[root@code-server backups]# gitlab-rake gitlab:check SANITIZE=true
Checking GitLab Shell ...
GitLab Shell version >= 5.3.1 ? ... OK (5.3.1)
Repo base directory exists?
default... yes
Repo storage directories are symlinks?
default... no
Repo paths owned by git:root, or git:git?
default... yes
Repo paths access is drwxrws---?
default... yes
hooks directories in repos are links: ...
5/1 ... ok
6/2 ... ok
5/3 ... repository is empty
12/4 ... ok
12/5 ... ok
Running /opt/gitlab/embedded/service/gitlab-shell/bin/check
Check GitLab API access: OK
Access to /var/opt/gitlab/.ssh/authorized_keys: OK
Send ping to redis server: OK
gitlab-shell self-check successful
Checking GitLab Shell ... Finished
Checking Sidekiq ...
Running? ... yes
Number of Sidekiq processes ... 1
Checking Sidekiq ... Finished
Checking Reply by email ...
Reply by email is disabled in config/gitlab.yml
Checking Reply by email ... Finished
Checking LDAP ...
LDAP is disabled in config/gitlab.yml
Checking LDAP ... Finished
Checking GitLab ...
Git configured correctly? ... yes
Database config exists? ... yes
All migrations up? ... yes
Database contains orphaned GroupMembers? ... no
GitLab config exists? ... yes
GitLab config up to date? ... yes
Log directory writable? ... yes
Tmp directory writable? ... yes
Uploads directory exists? ... yes
Uploads directory has correct permissions? ... yes
Uploads directory tmp has correct permissions? ... yes
Init script exists? ... skipped (omnibus-gitlab has no init script)
Init script up-to-date? ... skipped (omnibus-gitlab has no init script)
Projects have namespace: ...
5/1 ... yes
6/2 ... yes
5/3 ... yes
12/4 ... yes
12/5 ... yes
Redis version >= 2.8.0? ... yes
Ruby version >= 2.3.3 ? ... yes (2.3.3)
Git version >= 2.7.3 ? ... yes (2.13.4)
Active users: ... 11
Checking GitLab ... Finished
然后稍等一会（如果启动gitlab后，访问出现500，这是因为redis等程序还没完全启动，等一会儿访问就ok了），再次登录Gitlab，就会发现之前误删除的test项目已经恢复了！
另外：Gitlab迁移与恢复一样，但是要求两个GitLab版本号一致
标签：dump pac port database moni lfs exe color ber
原文地址：https://www.cnblogs.com/idcode/p/14547303.html
