Jmeter(四十一) - 从入门到精通进阶篇 - Jmeter配置文件的刨根问底 - 下篇（详解教程）

################################################################################
# Apache JMeter Property file for Report Generator
################################################################################

################################################################################

# Apache JMeter属性文件用于报表生成器

################################################################################

## Licensed to the Apache Software Foundation (ASF) under one or more
## contributor license agreements. See the NOTICE file distributed with
## this work for additional information regarding copyright ownership.
## The ASF licenses this file to You under the Apache License, Version 2.0
## (the "License"); you may not use this file except in compliance with
## the License. You may obtain a copy of the License at
## 
## http://www.apache.org/licenses/LICENSE-2.0
## 
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
## See the License for the specific language governing permissions and
## limitations under the License.

## Apache软件基金会（ASF）下一个或多个许可
## 贡献者许可协议。请参阅
## 此作品用于获取关于版权所有权的附加信息。
## ASF根据Apache 2.0 版本许可证协议将此文件授权给您。
## (“许可证”)；除非符合以下条件，否则不能使用此文件
## 许可证。您可以在
## 
## http://www.apache.org/licenses/LICENSE-2.0
## 
## 除非适用法律要求或书面同意，软件
## 根据在“AS IS”BASIS上分发的许可证基础上发布的，
## 无任何明示或暗示的保证或条件。
## 有关管理权限的特定语言，请参阅许可证
## 《许可证》规定的限制。

################################################################################
#
# THIS FILE SHOULD NOT BE MODIFIED
#
# This avoids having to re-apply the modifications when upgrading JMeter
# Instead only user.properties should be modified:
# 1/ copy the property you want to modify to user.properties from here
# 2/ Change its value there
#
################################################################################

################################################################################
#
# 此文件不应修改
#
# 这避免了升级JMeter时必须重新应用修改
# 相反，应该只修改user.properties：
# （1） 从此处将要修改的属性复制到user.properties
# （2） 在那里更改字段值
#
################################################################################

#---------------------------------------------------------------------------
# Reporting configuration
#---------------------------------------------------------------------------

#---------------------------------------------------------------------------
# 报告配置
#---------------------------------------------------------------------------

# Sets the satisfaction threshold for the APDEX calculation (in milliseconds).
#jmeter.reportgenerator.apdex_satisfied_threshold=500

# 设置APDEX计算的满意度阈值（以毫秒为单位）。
#jmeter.reportgenerator.apdex_satisfied_threshold=500

# Sets the tolerance threshold for the APDEX calculation (in milliseconds).
#jmeter.reportgenerator.apdex_tolerated_threshold=1500

# 设置APDEX计算的公差阈值（以毫秒为单位）。
#jmeter.reportgenerator.apdex_tolerated_threshold=1500

# Sets satisfaction and tolerance threshold to specific samples.
# Use sample names or regular expression. 
# Format is : sample_name:satisfaction|tolerance[;]
# Notice the colon between sample name and values, the pipe between thresholds and the 
# semicolon at the end to separate different samples. Don‘t forget to escape after
# semicolon to span multiple lines. Ex : 
#jmeter.reportgenerator.apdex_per_transaction=sample(\\d+):1000|2000,# samples12:3000|4000;# scenar01-12:5000|6000 

# 为特定样本设置满意度和公差阈值。
# 使用示例名称或正则表达式。
# 格式为：sample_name:satisfaction|tolerance[;]
# 注意示例名称和值之间的冒号，阈值和 
# 最后用分号分隔不同的样本。别忘了之后要运行
# 分号以跨越多行。 例子 : 
#jmeter.reportgenerator.apdex_per_transaction=sample(\\d+):1000|2000,# samples12:3000|4000;# scenar01-12:5000|6000 

# This property is used by menu item "Export transactions for report"
# It is used to select which transactions by default will be exported
#jmeter.reportgenerator.exported_transactions_pattern=[a-zA-Z0-9_\\-{}\\$\\.]*[-_][0-9]*

# 此属性用于菜单项“导出事务报告”
# 它用于选择默认情况下将导出哪些事务
#jmeter.reportgenerator.exported_transactions_pattern=[a-zA-Z0-9_\\-{}\\$\\.]*[-_][0-9]*

# Regular Expression which Indicates which samples to keep for graphs and statistics generation.
# Empty value means no filtering
#jmeter.reportgenerator.sample_filter=

# 正则表达式，它指示图形和统计信息生成保留哪些样本。
# 空值意味着没有过滤
#jmeter.reportgenerator.sample_filter=

# Sets the temporary directory used by the generation process if it needs file I/O operations.
#jmeter.reportgenerator.temp_dir=temp

# 如果需要设置生成过程使用的临时目录，则需要文件I/O操作。
#jmeter.reportgenerator.temp_dir=temp

# Sets the size of the sliding window used by percentile evaluation.
# Caution : higher value provides a better accuracy but needs more memory.
#jmeter.reportgenerator.statistic_window = 20000

# 设置百分位数计算所使用的滑动窗口的大小。
# 注意：更高的值提供更好的精度，但是需要更多的内存。
#jmeter.reportgenerator.statistic_window = 20000

# Configure this property to change the report title
#jmeter.reportgenerator.report_title=Apache JMeter Dashboard

# 配置此属性以更改报告标题
#jmeter.reportgenerator.report_title=Apache JMeter Dashboard

# Default format
#jmeter.reportgenerator.date_format=yyyyMMddHHmmss

# 默认格式
#jmeter.reportgenerator.date_format=yyyyMMddHHmmss

# Used to generate a report based on a date range
# If jmeter.save.saveservice.timestamp_format does not contain year
# then use 1970 as year
# Date range start date as per format declared in jmeter.reportgenerator.date_format 
#jmeter.reportgenerator.start_date=
# Date range end date as per format declared in jmeter.reportgenerator.date_format
#jmeter.reportgenerator.end_date=

# 用于根据日期范围生成报告
# 如果 jmeter.save.saveservice.timestamp_format does 不包含“年”
# 则使用1970年作为年份
# 日期范围开始日期，按照 jmeter.reportgenerator.date_format 中声明的格式
#jmeter.reportgenerator.start_date=
# 日期范围结束日期，按照 jmeter.reportgenerator.date_format 中声明的格式
#jmeter.reportgenerator.end_date=

# Defines the overall granularity for over time graphs
# Granularity must be higher than 1000 (1second) otherwise Throughput graphs will be incorrect
# see Bug 60149
jmeter.reportgenerator.overall_granularity=60000

# 为随时间变化的图表定义总体粒度
# 粒度必须大于1000(1秒)，否则吞吐量图将不正确
# 参见Bug 60149
jmeter.reportgenerator.overall_granularity=60000

# Exclude transaction controller from analysis
# true by default
jmeter.reportgenerator.exclude_tc_from_top5_errors_by_sampler=true

# 将事务控制器排除在分析之外
# 默认情况下为true
jmeter.reportgenerator.exclude_tc_from_top5_errors_by_sampler=true

# Response Time Percentiles graph definition
jmeter.reportgenerator.graph.responseTimePercentiles.classname=org.apache.jmeter.report.processor.graph.impl.ResponseTimePercentilesGraphConsumer
jmeter.reportgenerator.graph.responseTimePercentiles.title=Response Time Percentiles

# 响应时间百分比图表定义
jmeter.reportgenerator.graph.responseTimePercentiles.classname=org.apache.jmeter.report.processor.graph.impl.ResponseTimePercentilesGraphConsumer
jmeter.reportgenerator.graph.responseTimePercentiles.title=Response Time Percentiles

# Response Time Distribution graph definition
jmeter.reportgenerator.graph.responseTimeDistribution.classname=org.apache.jmeter.report.processor.graph.impl.ResponseTimeDistributionGraphConsumer
jmeter.reportgenerator.graph.responseTimeDistribution.title=Response Time Distribution
jmeter.reportgenerator.graph.responseTimeDistribution.property.set_granularity=100

# 响应时间分布图定义
jmeter.reportgenerator.graph.responseTimeDistribution.classname=org.apache.jmeter.report.processor.graph.impl.ResponseTimeDistributionGraphConsumer
jmeter.reportgenerator.graph.responseTimeDistribution.title=Response Time Distribution
jmeter.reportgenerator.graph.responseTimeDistribution.property.set_granularity=100

# Active Threads Over Time graph definition
jmeter.reportgenerator.graph.activeThreadsOverTime.classname=org.apache.jmeter.report.processor.graph.impl.ActiveThreadsGraphConsumer
jmeter.reportgenerator.graph.activeThreadsOverTime.title=Active Threads Over Time
jmeter.reportgenerator.graph.activeThreadsOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 随时间变化的活动线程图定义
jmeter.reportgenerator.graph.activeThreadsOverTime.classname=org.apache.jmeter.report.processor.graph.impl.ActiveThreadsGraphConsumer
jmeter.reportgenerator.graph.activeThreadsOverTime.title=Active Threads Over Time
jmeter.reportgenerator.graph.activeThreadsOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Time VS Threads graph definition
jmeter.reportgenerator.graph.timeVsThreads.classname=org.apache.jmeter.report.processor.graph.impl.TimeVSThreadGraphConsumer
jmeter.reportgenerator.graph.timeVsThreads.title=Time VS Threads

# 时间VS线程图定义
jmeter.reportgenerator.graph.timeVsThreads.classname=org.apache.jmeter.report.processor.graph.impl.TimeVSThreadGraphConsumer
jmeter.reportgenerator.graph.timeVsThreads.title=Time VS Threads

# Bytes Throughput Over Time graph definition
jmeter.reportgenerator.graph.bytesThroughputOverTime.classname=org.apache.jmeter.report.processor.graph.impl.BytesThroughputGraphConsumer
jmeter.reportgenerator.graph.bytesThroughputOverTime.title=Bytes Throughput Over Time
jmeter.reportgenerator.graph.bytesThroughputOverTime.exclude_controllers=true
jmeter.reportgenerator.graph.bytesThroughputOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Bytes吞吐量随时间图定义
jmeter.reportgenerator.graph.bytesThroughputOverTime.classname=org.apache.jmeter.report.processor.graph.impl.BytesThroughputGraphConsumer
jmeter.reportgenerator.graph.bytesThroughputOverTime.title=Bytes Throughput Over Time
jmeter.reportgenerator.graph.bytesThroughputOverTime.exclude_controllers=true
jmeter.reportgenerator.graph.bytesThroughputOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Response Time Over Time graph definition
jmeter.reportgenerator.graph.responseTimesOverTime.classname=org.apache.jmeter.report.processor.graph.impl.ResponseTimeOverTimeGraphConsumer
jmeter.reportgenerator.graph.responseTimesOverTime.title=Response Time Over Time
jmeter.reportgenerator.graph.responseTimesOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 响应时间随时间变化的图表定义
jmeter.reportgenerator.graph.responseTimesOverTime.classname=org.apache.jmeter.report.processor.graph.impl.ResponseTimeOverTimeGraphConsumer
jmeter.reportgenerator.graph.responseTimesOverTime.title=Response Time Over Time
jmeter.reportgenerator.graph.responseTimesOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Percentiles Response Times over time
jmeter.reportgenerator.graph.responseTimePercentilesOverTime.classname=org.apache.jmeter.report.processor.graph.impl.ResponseTimePercentilesOverTimeGraphConsumer
jmeter.reportgenerator.graph.responseTimePercentilesOverTime.title=Response Time Percentiles Over Time (successful requests only)
jmeter.reportgenerator.graph.responseTimePercentilesOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 百分比响应时间
jmeter.reportgenerator.graph.responseTimePercentilesOverTime.classname=org.apache.jmeter.report.processor.graph.impl.ResponseTimePercentilesOverTimeGraphConsumer
jmeter.reportgenerator.graph.responseTimePercentilesOverTime.title=Response Time Percentiles Over Time (successful requests only)
jmeter.reportgenerator.graph.responseTimePercentilesOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Synthetic Response Time Distribution
jmeter.reportgenerator.graph.syntheticResponseTimeDistribution.classname=org.apache.jmeter.report.processor.graph.impl.SyntheticResponseTimeDistributionGraphConsumer
jmeter.reportgenerator.graph.syntheticResponseTimeDistribution.title=Synthetic Response Times Distribution
jmeter.reportgenerator.graph.syntheticResponseTimeDistribution.exclude_controllers=true
jmeter.reportgenerator.graph.syntheticResponseTimeDistribution.property.set_satisfied_threshold=${jmeter.reportgenerator.apdex_satisfied_threshold}
jmeter.reportgenerator.graph.syntheticResponseTimeDistribution.property.set_tolerated_threshold=${jmeter.reportgenerator.apdex_tolerated_threshold}

# 综合响应时间分布
jmeter.reportgenerator.graph.syntheticResponseTimeDistribution.classname=org.apache.jmeter.report.processor.graph.impl.SyntheticResponseTimeDistributionGraphConsumer
jmeter.reportgenerator.graph.syntheticResponseTimeDistribution.title=Synthetic Response Times Distribution
jmeter.reportgenerator.graph.syntheticResponseTimeDistribution.exclude_controllers=true
jmeter.reportgenerator.graph.syntheticResponseTimeDistribution.property.set_satisfied_threshold=${jmeter.reportgenerator.apdex_satisfied_threshold}
jmeter.reportgenerator.graph.syntheticResponseTimeDistribution.property.set_tolerated_threshold=${jmeter.reportgenerator.apdex_tolerated_threshold}

# Latencies Over Time graph definition
jmeter.reportgenerator.graph.latenciesOverTime.classname=org.apache.jmeter.report.processor.graph.impl.LatencyOverTimeGraphConsumer
jmeter.reportgenerator.graph.latenciesOverTime.title=Latencies Over Time
jmeter.reportgenerator.graph.latenciesOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 时间延迟图定义
jmeter.reportgenerator.graph.latenciesOverTime.classname=org.apache.jmeter.report.processor.graph.impl.LatencyOverTimeGraphConsumer
jmeter.reportgenerator.graph.latenciesOverTime.title=Latencies Over Time
jmeter.reportgenerator.graph.latenciesOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Connect Time Over Time graph definition
jmeter.reportgenerator.graph.connectTimeOverTime.classname=org.apache.jmeter.report.processor.graph.impl.ConnectTimeOverTimeGraphConsumer
jmeter.reportgenerator.graph.connectTimeOverTime.title=Connect Time Over Time
jmeter.reportgenerator.graph.connectTimeOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 连接随时间变化的图表定义
jmeter.reportgenerator.graph.connectTimeOverTime.classname=org.apache.jmeter.report.processor.graph.impl.ConnectTimeOverTimeGraphConsumer
jmeter.reportgenerator.graph.connectTimeOverTime.title=Connect Time Over Time
jmeter.reportgenerator.graph.connectTimeOverTime.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Response Time Vs Request graph definition
jmeter.reportgenerator.graph.responseTimeVsRequest.classname=org.apache.jmeter.report.processor.graph.impl.ResponseTimeVSRequestGraphConsumer
jmeter.reportgenerator.graph.responseTimeVsRequest.title=Response Time Vs Request
jmeter.reportgenerator.graph.responseTimeVsRequest.exclude_controllers=true
jmeter.reportgenerator.graph.responseTimeVsRequest.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 响应时间与请求图定义
jmeter.reportgenerator.graph.responseTimeVsRequest.classname=org.apache.jmeter.report.processor.graph.impl.ResponseTimeVSRequestGraphConsumer
jmeter.reportgenerator.graph.responseTimeVsRequest.title=Response Time Vs Request
jmeter.reportgenerator.graph.responseTimeVsRequest.exclude_controllers=true
jmeter.reportgenerator.graph.responseTimeVsRequest.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Latencies Vs Request graph definition
jmeter.reportgenerator.graph.latencyVsRequest.classname=org.apache.jmeter.report.processor.graph.impl.LatencyVSRequestGraphConsumer
jmeter.reportgenerator.graph.latencyVsRequest.title=Latencies Vs Request
jmeter.reportgenerator.graph.latencyVsRequest.exclude_controllers=true
jmeter.reportgenerator.graph.latencyVsRequest.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 延迟Vs请求图定义
jmeter.reportgenerator.graph.latencyVsRequest.classname=org.apache.jmeter.report.processor.graph.impl.LatencyVSRequestGraphConsumer
jmeter.reportgenerator.graph.latencyVsRequest.title=Latencies Vs Request
jmeter.reportgenerator.graph.latencyVsRequest.exclude_controllers=true
jmeter.reportgenerator.graph.latencyVsRequest.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Hits Per Second graph definition
jmeter.reportgenerator.graph.hitsPerSecond.classname=org.apache.jmeter.report.processor.graph.impl.HitsPerSecondGraphConsumer
jmeter.reportgenerator.graph.hitsPerSecond.title=Hits Per Second
jmeter.reportgenerator.graph.hitsPerSecond.exclude_controllers=true
jmeter.reportgenerator.graph.hitsPerSecond.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 按第二图定义命中
jmeter.reportgenerator.graph.hitsPerSecond.classname=org.apache.jmeter.report.processor.graph.impl.HitsPerSecondGraphConsumer
jmeter.reportgenerator.graph.hitsPerSecond.title=Hits Per Second
jmeter.reportgenerator.graph.hitsPerSecond.exclude_controllers=true
jmeter.reportgenerator.graph.hitsPerSecond.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Codes Per Second graph definition
jmeter.reportgenerator.graph.codesPerSecond.classname=org.apache.jmeter.report.processor.graph.impl.CodesPerSecondGraphConsumer
jmeter.reportgenerator.graph.codesPerSecond.title=Codes Per Second
jmeter.reportgenerator.graph.codesPerSecond.exclude_controllers=true
jmeter.reportgenerator.graph.codesPerSecond.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 每秒图形定义的代码
jmeter.reportgenerator.graph.codesPerSecond.classname=org.apache.jmeter.report.processor.graph.impl.CodesPerSecondGraphConsumer
jmeter.reportgenerator.graph.codesPerSecond.title=Codes Per Second
jmeter.reportgenerator.graph.codesPerSecond.exclude_controllers=true
jmeter.reportgenerator.graph.codesPerSecond.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Total TPS Per Second graph definition
jmeter.reportgenerator.graph.totalTPS.classname=org.apache.jmeter.report.processor.graph.impl.TotalTPSGraphConsumer
jmeter.reportgenerator.graph.totalTPS.title=Total Transactions Per Second
jmeter.reportgenerator.graph.totalTPS.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 每秒总TPS图定义
jmeter.reportgenerator.graph.totalTPS.classname=org.apache.jmeter.report.processor.graph.impl.TotalTPSGraphConsumer
jmeter.reportgenerator.graph.totalTPS.title=Total Transactions Per Second
jmeter.reportgenerator.graph.totalTPS.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# Transactions Per Second graph definition
jmeter.reportgenerator.graph.transactionsPerSecond.classname=org.apache.jmeter.report.processor.graph.impl.TransactionsPerSecondGraphConsumer
jmeter.reportgenerator.graph.transactionsPerSecond.title=Transactions Per Second
jmeter.reportgenerator.graph.transactionsPerSecond.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# 每秒图表定义的事务
jmeter.reportgenerator.graph.transactionsPerSecond.classname=org.apache.jmeter.report.processor.graph.impl.TransactionsPerSecondGraphConsumer
jmeter.reportgenerator.graph.transactionsPerSecond.title=Transactions Per Second
jmeter.reportgenerator.graph.transactionsPerSecond.property.set_granularity=${jmeter.reportgenerator.overall_granularity}

# HTML Export
jmeter.reportgenerator.exporter.html.classname=org.apache.jmeter.report.dashboard.HtmlTemplateExporter

# HTML导出
jmeter.reportgenerator.exporter.html.classname=org.apache.jmeter.report.dashboard.HtmlTemplateExporter

# Sets the source directory of templated files from which the html pages are generated.
#jmeter.reportgenerator.exporter.html.property.template_dir=report-template

# 设置生成html页面的模板化文件的源目录。
#jmeter.reportgenerator.exporter.html.property.template_dir=report-template

# Sets the destination directory for generated html pages.
# This will be overridden by the command line option -o 
#jmeter.reportgenerator.exporter.html.property.output_dir=report-output

# 为生成的html页面设置目标目录。
# 这将被命令行选项-o覆盖 
#jmeter.reportgenerator.exporter.html.property.output_dir=report-output

# Regular Expression which Indicates which graph series are filtered in display
# Empty value means no filtering
#jmeter.reportgenerator.exporter.html.series_filter=

# 正则表达式，指示在显示中过滤了哪些图系列
# 空值意味着没有过滤
#jmeter.reportgenerator.exporter.html.series_filter=

# Indicates whether series filter apply only on sample series or to all series
# setting this to false can lead to empty graphs if series_filter does not
# contain required series
#jmeter.reportgenerator.exporter.html.filters_only_sample_series=true

# 指示序列筛选器是否仅应用于示例序列或所有系列。
# 如果series_filter不设置为false，则会导致空图
# 包含所需系列
#jmeter.reportgenerator.exporter.html.filters_only_sample_series=true

# Indicates whether only controller samples are displayed on graphs that support it.
#jmeter.reportgenerator.exporter.html.show_controllers_only=false

# 指示是否仅在支持该控制器的图形上显示控制器示例。
#jmeter.reportgenerator.exporter.html.show_controllers_only=false