centos6.4上drbd安装

标签：drbd

• 安装drbd过程：(实验借鉴：http://www.it165.net/os/html/201309/6317.html)
  

• yum -y install libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 gcc gcc-c++ autoconf
  

• # wget http://oss.linbit.com/drbd/8.4/drbd-8.4.3.tar.gz
  
  注意：安装kernel-devel一定要和你uname -r 看到的内核版本一致，建议kernel-devel用本地源安装，不要用网络源安装 

• # tar -zxvf drbd-8.4.3.tar.gz
  # cd drbd-8.4.3

• ./configure --prefix=/usr/local/drbd --with-km启用内核模块

• make KDIR=/usr/src/kernels/2.6.32-358.el6.i686/ 编译到内核里面

• make install

• cp /usr/local/drbd/etc/rc.d/init.d/drbd /etc/init.d/

• cd /usr/local/drbd/var;mkdir run;cd run;mkdir drbd

• 然后回到解压的目录，执行清理：

• cd /lvs/drbd-8.4.3/drbd;make clean

• make KDIR=/usr/src/kernels/2.6.32-358.el6.i686/

• cp drbd.ko /lib/modules/2.6.32-358.el6.i686/kernel/lib/

• modprobe drbd  加载到内核

• lsmod | grep drbd

• mknod /dev/drbd0 b 147 0

• +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

• cd /usr/local/drbd/etc/drbd.d

• vi drbd.res
  
  resource drbd {
          on web1 {
          device /dev/drbd0;
          disk /dev/sdb1;
          address 192.168.1.22:7789;
          meta-disk internal;
       }
          on web2 {
          device /dev/drbd0;
          disk /dev/sdb1;
          address 192.168.1.23:7789;
          meta-disk internal;
       }
  }

• drbdadmin create-md drbd

• /etc/init.d/drbd start

本文出自 “大王好帅” 博客，请务必保留此出处http://dawang.blog.51cto.com/4927689/1591748

centos6.4上drbd安装

标签：drbd

原文地址：http://dawang.blog.51cto.com/4927689/1591748