标签：
Robert said:
Ok, so I bought a Lexia3 interface from EOBD2.FR
in 2010. I have had no issues over the past 5 years on my Citroen XM.
It is use has been primarily as a maintenance tool 2 or 3 times a year
to be sure everything is ok with my car. I had pulled a fault code with
it when the airbag came on. Erased the code and the light was turned
off, never come back.
Gilbert said:
The Lexia3 V48 works on both my 2002 2.0 HDI and 2004 2.0 HDIs.
Frank said:
My Chinese Lexia has been used successfully on my XM2.1TD and C4
2.0HDI. The C4 OBD connection has been temperamental but gets there with
patience.
Ben said:
My Lexia will work with the wife‘s Pug 107 using Citroen software.
Dominic said:
I too have used the Lexia on my Xm for several years and like Robert
solved the early connection problems by filing the 30-pin red plug so
that it went further into the socket on the car and thus connected
electrically. The C5 will not use this 30-pin plug, it will use the
standard 16-pin OBD plug so that aspect will not be an issue.
I have tried my Lexia on several types of Citroens all with success (except I cannot clear the codes on a Berlingo). However I have never tried a C5. I have a good friend with a series 2 C5. If I get a chance over the weekend I‘ll ask him if I can plug in the Lexia and I‘ll let you know how I get on.
Cheers
Steve said:
My clone Lexia3 has worked on XM 2.5, XM TCT, XM SED, XM 3.0, C5 and Peugeot 107 with Lexia software.
Customer reviews on Lexia3 V48 diagnostic tool in EOBD2.FR
标签：
原文地址：http://www.cnblogs.com/mike88992/p/4178685.html
