arping命令是获取同一个网络下面主机的mac地址。这里的同一网络是ip可以互通。linux下面。
可以知道这个ip是否被占用,一个很有用的命令。刚才操作了一下报错。
[root@localhost etc]# arping 10.2.167.27 arping: unknown iface eth0 [root@localhost etc]# arping 10.2.167.177 arping: unknown iface eth0 [root@localhost etc]#
ifconfig看一下。
[root@localhost etc]# ifconfig eth1 Link encap:Ethernet HWaddr 00:0C:29:D8:3D:17 inet addr:10.2.167.27 Bcast:10.2.167.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fed8:3d17/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:479073 errors:0 dropped:0 overruns:0 frame:0 TX packets:17498 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:73918361 (70.4 MiB) TX bytes:3437224 (3.2 MiB) Interrupt:19 Base address:0x2024 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:5932 errors:0 dropped:0 overruns:0 frame:0 TX packets:5932 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:372219 (363.4 KiB) TX bytes:372219 (363.4 KiB)
那么就换个出口。用I可以指定出口网卡。
[root@localhost etc]# arping -I eth1 10.2.167.177 ARPING 10.2.167.177 from 10.2.167.27 eth1 Unicast reply from 10.2.167.177 [54:14:A6:AC:5E:8A] 0.669ms Unicast reply from 10.2.167.177 [54:14:A6:AC:5E:8A] 0.603ms Unicast reply from 10.2.167.177 [54:14:A6:AC:5E:8A] 0.611ms Unicast reply from 10.2.167.177 [54:14:A6:AC:5E:8A] 0.597ms Unicast reply from 10.2.167.177 [54:14:A6:AC:5E:8A] 0.597ms Unicast reply from 10.2.167.177 [54:14:A6:AC:5E:8A] 0.593ms Unicast reply from 10.2.167.177 [54:14:A6:AC:5E:8A] 0.603ms Unicast reply from 10.2.167.177 [54:14:A6:AC:5E:8A] 0.584ms
原文地址:http://blog.csdn.net/u010278923/article/details/42238877