码迷,mamicode.com
首页 > 其他好文 > 详细

纯LACP

时间:2015-01-05 13:17:36      阅读:133      评论:0      收藏:0      [点我收藏+]

标签:interface   family   number   

 Configuring Aggregated Ethernet Device with LAG and LACP (CLI)



1.Configure the number of ae/LAG interface that you need to create.

[edit]

user@host# set chassis aggregated-devices ethernet device-count 5


2. Add port to ae/LAG

[edit]

user@host# set interfaces ge-2/0/1 gigether-options 802.3ad ae0

user@host# set interfaces ge-2/0/2 gigether-options 802.3ad ae0


3. Configure LACP for ae/LAG

[edit]

user@host# set interfaces ae0 aggregated-ether-options lacp active


4. Configure family Ethernet-switching for ae/LAG

[edit]

user@host# set interfaces ae0 unit 0 family ethernet-switching


5. Configure VLAN

[edit]


user@host# set vlans vlan20 vlan-id 20


6. Add ae to VLAN

[edit]

user@host# set vlans vlan20 interface ae0


7 . Check the configuration by entering show vlans and show interfaces commands

user@host# show vlans

vlan20 {

vlan-id 20;

interface {

ae0.0;

}

}

user@host# show interfaces

ge-2/0/1 {

gigether-options {

802.3ad ae0;

}

}

ge-2/0/2 {

gigether-options {

802.3ad ae0;

}

}

ae0 {

aggregated-ether-options {

lacp {

active;

}

}

unit 0 {

family ethernet-switching;

}

}


8. If you are done configuring the device, commit the configuration.

[edit]

user@host# commit



Verification


user@host# run show lacp interfaces

Aggregated interface: ae0

LACP state: Role Exp Def Dist Col Syn Aggr Timeout Activity

ge-2/0/1 Actor No No Yes Yes Yes Yes Fast Active

ge-2/0/1 Partner No No Yes Yes Yes Yes Fast Active

ge-2/0/2 Actor No No Yes Yes Yes Yes Fast Active

ge-2/0/2 Partner No No Yes Yes Yes Yes Fast Active

LACP protocol: Receive State Transmit State Mux State


user@host# run show vlans

Name Tag Interfaces

default 1 None

vlan20 20 ae0.0

From the configuration mode, enter show interfaces (interface name) command to view

the status of ge-2/0/1 and ge-2/0/2 interfaces.


user@host# run show interfaces ge-2/0/1 terse

Interface Admin Link Proto Local Remote

ge-2/0/1 up up

ge-2/0/1.0 up up aenet --> ae0.0

user@host# run show interfaces ge-2/0/2 terse

Interface Admin Link Proto Local Remote

ge-2/0/2 up up

ge-2/0/2.0 up up aenet --> ae0.0


run show inter ter | match ae


本文出自 “流云飞逝” 博客,请务必保留此出处http://ciscoxia.blog.51cto.com/4509234/1599161

纯LACP

标签:interface   family   number   

原文地址:http://ciscoxia.blog.51cto.com/4509234/1599161

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!