最近在AIO 6.1与SF环境中遇到了AIO的问题，下面是MOS中关于AIO 在6.1下的一般变化说明
欢迎大家加入ORACLE超级群：17115662 免费解决各种ORACLE问题,以后BLOG将迁移到http://www.htz.pw
AIO on AIX 6.1 (文档 ID 1328019.1)
修改时间:2014-5-6
类型:HOWTO
In this Document
AIO on AIX 6.1 (文档 ID 1328019.1)
修改时间:2014-5-6
类型:HOWTO
In this Document
APPLIES TO:
Oracle Server - Enterprise Edition - Version 10.2.0.4 to 11.2.0.2.0 [Release 10.2 to 11.2]
IBM AIX on POWER Systems (64-bit)
GOAL
Enabling or checking AIO on AIX 6.1 Operating System.
FIX
Customers do not need to enable AIO subsystem on AIX 6.1 as it‘s a default option. AIO subsystems are handled thru AIX kernel extensions and they are loaded by default. They are also automatically started when an application initiates an AIO requests.
Two new parameters (aio_active and posix_aio_active; ioo -a | grep aio) have been added on AIX 6.1, but they can only be changed by AIX. The value is set to 1 only when AIX kernel extensions are used and pinned.
So, the bottom line is that you don‘t need to do any checking on AIX 6.1. Another way of checking if AIO subsystems are loaded is to verify whether kernel extensions are loaded or not. You can do that by doing "genkex | grep aio".
As an example - the following command may show:
/usr/sbin/ioo -a | grep aio
aio_active = 1
aio_maxreqs = 8192
aio_maxservers = 40
aio_minservers = 20
aio_server_inactivity = 300
posix_aio_active = 1
posix_aio_maxreqs = 65536
posix_aio_maxservers = 30
posix_aio_minservers = 3
posix_aio_server_inactivity = 300
NOTE: Please note that Oracle is not recommending changes to these parameters as they are dynamically tuned by AIX 6.1 and values of these parameters get changed according to the server utilization. AIX will adjust them accordingly.
APPLIES TO:
Oracle Server - Enterprise Edition - Version 10.2.0.4 to 11.2.0.2.0 [Release 10.2 to 11.2]
IBM AIX on POWER Systems (64-bit)
GOAL
Enabling or checking AIO on AIX 6.1 Operating System.
FIX
Customers do not need to enable AIO subsystem on AIX 6.1 as it‘s a default option. AIO subsystems are handled thru AIX kernel extensions and they are loaded by default. They are also automatically started when an application initiates an AIO requests.
Two new parameters (aio_active and posix_aio_active; ioo -a | grep aio) have been added on AIX 6.1, but they can only be changed by AIX. The value is set to 1 only when AIX kernel extensions are used and pinned.
So, the bottom line is that you don‘t need to do any checking on AIX 6.1. Another way of checking if AIO subsystems are loaded is to verify whether kernel extensions are loaded or not. You can do that by doing "genkex | grep aio".
As an example - the following command may show:
/usr/sbin/ioo -a | grep aio
aio_active = 1
aio_maxreqs = 8192
aio_maxservers = 40
aio_minservers = 20
aio_server_inactivity = 300
posix_aio_active = 1
posix_aio_maxreqs = 65536
posix_aio_maxservers = 30
posix_aio_minservers = 3
posix_aio_server_inactivity = 300
NOTE: Please note that Oracle is not recommending changes to these parameters as they are dynamically tuned by AIX 6.1 and values of these parameters get changed according to the server utilization. AIX will adjust them accordingly.
AIO on AIX 6.1 (文档 ID 1328019.1),布布扣,bubuko.com
AIO on AIX 6.1 (文档 ID 1328019.1)
原文地址：http://luoping.blog.51cto.com/534596/1416831
