标签：c style blog a http tar
Stop 命令
使用该命令的程序位置
INITIALIZATION, AT SELECTION-SCREEN, START-OF-SELECTION和GET 事件中
处理说明
1、 当在INITIALIZATION事件执行该命令，系统将直接触发应用服务器和客户端屏幕元素的发送；
2、 在其他事件中将直接触发END-OF-SELECTION事件的执行，如果不想执行END-OF-SELECTION，请使用
RETURN或者 EXIT.
注意事项
EXIT命令
使用该命令的程序位置
处理说明
1、 循环处理中，EXIT只跳出当前的循环；
2、 在START-OF-SELECTION, GET,
END-OF-SELECTION事件中，将直接触发List输出，将不执行END-OF-SELECTION事件;如果没有List输出，系统将直接返回选择屏幕；
3、 对于procedure系统返回调用处；
注意事项
Sap推荐EXIT只是用于循环处理，对于处理模块请使用Return。
RETURN命令
使用该命令的程序位置
用于处理模块中(event block, dialog module, procedure (function module, method,
subroutine))
处理说明
1、 对于procedure ，RETURN将无条件退出当前的处理模块，不影响后续模块的执行；
2、 对于START-OF-SELECTION, GET,
END-OF-SELECTION事件中，将直接触发List输出，将不执行END-OF-SELECTION事件;如果没有List输出，系统将直接返回选择屏幕；
注意事项
RETURN不管存在多少层次的循环，将直接退出当前处理模块，这一点和EXIT不同
CHECK命令
使用该命令的程序位置
处理说明
1、 循环处理中，CHECK只是不执行本次循环的后续处理，继续调到下一次循环；
2、 在START-OF-SELECTION, GET,
END-OF-SELECTION事件中，只是中断本事件内的后续代码的执行 ，不影响其他后续模块的处理，这和EXIT，RETURN是不同的；
3、 对于没有循环procedure系统返回调用处；
4、 对逻辑数据库的GET事件，系统退出本次纪录和子节点的读取处理，将继续下一条纪录的处理；
注意事项
Sap推荐CHECK只是用于循环处理，对于处理模块请使用Return。
REJECT命令
使用该命令的程序位置
用于逻辑数据库的GET处理事件中
处理说明
REJECT的处理类似CHECK，但和CHECK不同的是：REJECT如果在循环内也同样退出本次的处理，而CHECK只是退出循环，不退出处理
注意事项
MESSAGE命令
使用该命令的程序位置
处理说明
MESSAGE在不同程序位置对应处理列表
| |
A |
E |
I |
S |
W |
X |
| PAI Module |
1 |
2 |
3 |
4 |
5 |
6 |
| PAI Module for POH |
1 |
7 |
3 |
4 |
7 |
6 |
| PAI Module for POV |
1 |
7 |
3 |
4 |
7 |
6 |
| |
|
|
|
|
|
|
| AT SELECTION-SCREEN ... |
1 |
8 |
3 |
4 |
9 |
6 |
| AT SELECTION-SCREEN for POH |
1 |
7 |
3 |
4 |
7 |
6 |
| AT SELECTION-SCREEN for POV |
1 |
7 |
3 |
4 |
7 |
6 |
| AT SELECTION-SCREEN ON EXIT |
1 |
7 |
3 |
4 |
7 |
6 |
| |
|
|
|
|
|
|
| AT LINE-SELECTION |
1 |
10 |
3 |
4 |
10 |
6 |
| AT PFn |
1 |
10 |
3 |
4 |
10 |
6 |
| AT USER-COMMAND |
1 |
10 |
3 |
4 |
10 |
6 |
| |
|
|
|
|
|
|
| INITIALIZATION |
1 |
11 |
3 |
4 |
11 |
6 |
| START-OF-SELECTION |
1 |
11 |
3 |
4 |
11 |
6 |
| GET |
1 |
11 |
3 |
4 |
11 |
6 |
| END-OF-SELECTION |
1 |
11 |
3 |
4 |
11 |
6 |
| |
|
|
|
|
|
|
| TOP-OF-PAGE |
1 |
11 |
3 |
4 |
11 |
6 |
| END-OF-PAGE |
1 |
11 |
3 |
4 |
11 |
6 |
| TOP-OF-PAGE DURING ... |
1 |
10 |
3 |
4 |
10 |
6 |
| |
|
|
|
|
|
|
| LOAD-OF-PROGRAM |
1 |
1 |
4 |
4 |
4 |
6 |
| |
|
|
|
|
|
|
| PBO Module |
1 |
1 |
4 |
4 |
4 |
6 |
| AT SELECTION-SCREEN OUTPUT |
1 |
1 |
4 |
4 |
4 |
6 |
- The message appears in a dialog box and the program terminates. When
the user has confirmed the message, control returns to the next- highest area.
All the internal sessions are deleted from the stack.
- The message appears in the status line. Then PAI terminates and the
system returns to the current screen. All the screen fields combined
using FIELD or CHAIN are
now ready for input. The user must enter new values. The system triggers the
PAI event again, with the new values.
- The message appears in a dialog box. Once the user has confirmed the
message, the program continues immediately after
the MESSAGE statement.
- The message appears in the status line of the next screen. The
program continues immediately after the message statement.
- The message appears in the status line. Then the system continues as
in 2, except that the user can quit the message using ENTER without having to
enter new values. The system continues handling the PAI event from immediately
after the message statement.
- No message is displayed and a runtime
error, MESSAGE_TYPE_X, is triggered. The short
dump text contains the message identification.
- The program terminates with a runtime
error DYNPRO_MSG_IN_HELP. While F1 and F4 are
processed, the system cannot send error messages or warnings.
- The message appears in the status line. Then the system stops
selection screen processing and returns to the selection screen itself. The
screen fields specified in the additions to the AT
SELECTION-SCREEN statement are now ready for input. The user
must enter new values. The system then starts processing the selection screen
again with the new values.
- The message appears in the status line. Then the system continues as
in 8, except the the user can quit the message using ENTER, without having to
enter new values. The system continues handling the PAI event from immediately
after the message statement.
- The message appears in the status line and the processing block
terminates. The list level is displayed as before.
- The message appears in the status line and the processing block
terminates. The system then returns to the program call.
关于ABAP流程处理的一些命令的说明(stop,exit,return,check,reject),布布扣,bubuko.com
关于ABAP流程处理的一些命令的说明(stop,exit,return,check,reject)
标签：c style blog a http tar
原文地址：http://www.cnblogs.com/Nirvanacafe/p/3765603.html
