FastDFS5.02安装说明

1、下载 FastDFS 源程序，下载地址 http://sourceforge.net/projects/fastdfs/，这里下载的是 FastDFS_v5.02.tar.gz，下载完成后，将按照文件上传到/var/tmp路径下，然后通过cp命令将其放置到安装路径/home/deploy下
2、在 FastDFS_v5.02.tar.gz 所在文件夹下执行：

tar vxzf FastDFS_v5.02.tar.gz

3、进入 /home/deploy/FastDFS 目录，执行：

./make.sh

./make.sh install

如果运行如上命令后，在命令行信息最后看到类似
恭喜你，已经安装成功了！

3.3 安装Nginx依赖

安装 nginx时，需要安装nginx的依赖：

apt-get install gcc

apt-get install libpcre3 libpcre3-dev

apt-get install libssl-dev

apt-get install build-essential

3.4 安装Nginx

将nginx安装到/usr/local/路径下

移动压缩包：

cp /var/tmp/nginx-1.6.2.tar.gz /deploy/

解压文件：

tar -xvzf nginx-1.6.2.tar.gz

cd nginx-1.6.2

然后执行命令：

./configure --prefix=/usr/local/nginx --add-module=/deploy/fastdfs-nginx-module/src

Make

Make install

4 配置篇

默安装完成后，fastdfs默认的配置文件被放置在/etc/fdfs 目录下面，其中包括：

Tracker.conf 负责均衡调度服务器配置文件

Storage.conf 文件存储服务器配置文件

Client.conf 客户端上传配置文件

nginx.conf Nginx配置文件

4.1 tracker.conf配置

A、修改/etc/fdfs/tracker.conf文件,修改如下：

# bind an address of this host

# empty for bind all addresses of this host

bind_addr=192.168.1.244

# the base path to store data and log files

base_path=/home/fastdfs/tracker

# max concurrent connections this server supported

max_connections=1000

# the method of selecting group to upload files

# 0: round robin

# 1: specify group

# 2: load balance, select the max free space group to upload file

store_lookup=1

# which group to upload file

# when store_lookup set to 1, must set store_group to the group name

store_group=group1

# HTTP服务是否不生效

http.disabled=true

B、进入/usr/local/bin/目录，启动tracker服务器，执行命令：

fdfs_trackerd /etc/fdfs/tracker.conf
C、进入/home/fastdfs/logs/trackerd.log查看tracker的启动日志命令：

cat trackerd.log

如果看到类似：

恭喜你，tracker server已经启动成功！

4.2 storage.conf配置

A、修改/etc/fdfs/storage.conf文件：

# bind an address of this host

# empty for bind all addresses of this host

bind_addr=192.168.1.244

# the base path to store data and log files

base_path=/home/fastdfs/storage

# max concurrent connections the server supported

# default value is 256

# more max_connections means more memory will be used

max_connections=1000

# path(disk or mount point) count, default value is 1

store_path_count=1

# store_path#, based 0, if store_path0 not exists, it‘s value is base_path

# the paths must be exist

store_path0=/home/fastdfs/data

#store_path1=/home/yuqing/fastdfs2

http.disabled=true

group_name=group1

#修改成tracker server的IP和端口信息

tracker_server=192.168.1.244:22122

url_have_group_name = true

B、进入/etc/fdfs/目录，启动storage服务器，执行

fdfs_storaged /etc/fdfs/storage.conf

C、进入/home/fastdfs/logs/storage.log查看storage服务器启动日志：

cat storaged.log

如果看到类似信息：

恭喜你，storage server已经启动成功！

4.3 ngnix.conf配置

创建软链接：

ln -s /home/fastdfs/data /home/fastdfs/data/data/M00

进入/usr/local/nginx/conf路径下，修改其配置文件：

vi /usr/local/nginx/conf/nginx.conf

添加：

location /group1/M00 {

root /home/fastdfs/data/data;

ngx_fastdfs_module;

}

修改完毕配置文件，如果nginx处于启动状态，则使用以下重启命令：

root@ubuntu224:/usr/local/nginx/sbin# ./nginx -s reload

如果未启动nginx，则使用以下命令：

cd /usr/local/nginx/sbin

./nginx

确认80,23000端口已经监听
netstat -ntl

4.4 mod_fastdfs.conf配置

cp /deploy/fastdfs-nginx-module/src

cp mod_fastdfs.conf /etc/fdfs/

vi /etc/fdfs/mod_fastdfs.conf

配置内容如下：

#访问文件的URI是否含有group名称

url_have_group_name=true

#Tracker服务器

tracker_server=192.168.1.244:22122

store_path0=/home/fastdfs/storage

storage_server_port=23000

4.5 client.conf配置

FastDFS安装包中，自带了客户端程序，通过程序可以进行文件上传。在使用这个客户端程序之前，首先需要配置client.conf，然后再进行文件上传及下载。

进入目录/etc/fdfs/修改Tracker服务器192.168.1.244下的配置文件 /etc/fdfs/client.conf：
# the base path to store log files

base_path=/home/fastdfs/client

#use "#include" directive to include HTTP other settiongs

#include http.conf

# tracker_server can ocur more than once, and tracker_server format is

# "host:port", host can be hostname or ip address

tracker_server=192.168.1.244:22122

4.6 http.conf配置

无需配置

5 测试

经过前面的安装、配置、启动，马上就可以看到FastDFS的效果了，我们先上传一个文件，然后再通过http下载。

6 相关命令

停止trackerd服务：

killall fdfs_trackerd

停止storaged服务：

killall fdfs_storaged

启动trackerd服务：

fdfs_trackerd /etc/fdfs/tracker.conf

启动storaged服务：

fdfs_storaged /etc/fdfs/storage.conf

nginx在线安装与卸载

apt-get install nginx

apt-get remove nginx

6.1 上传文件

进入/usr/local/bin目录，上传文件，执行:

cp /var/tmp/guoyong.txt /usr/local/bin/

cd /usr/local/bin

fdfs_test /etc/fdfs/client.conf upload guoyong.txt

注： guoyong.txt 从/var/tmp复制过来

如果看到如下信息：

恭喜你，上传文件成功！

6.2 下载文件

在浏览器中，输入上图中的url地址http://192.168.1.244/group1/M00/00/00/wKgB9FUeT5qINEwRAAAAB32BJEIAAAAAgAAAAAAAAAf935.txt， tracker server会自动重定向到存储文件的storage server，文件下载成功。

至此，已经成功搭建了FastDFS，编写你自己的client来进行访问吧：）

7 附录

7.1 tracker.conf配置内容

# is this config file disabled

# false for enabled

# true for disabled

disabled=false

# bind an address of this host

# empty for bind all addresses of this host

bind_addr=192.168.1.244

# the tracker server port

port=22122

# connect timeout in seconds

# default value is 30s

connect_timeout=30

# network timeout in seconds

# default value is 30s

network_timeout=60

# the base path to store data and log files

base_path=/home/fastdfs/tracker

# max concurrent connections this server supported

max_connections=1000

# accept thread count

# default value is 1

# since V4.07

accept_threads=1

# work thread count, should <= max_connections

# default value is 4

# since V2.00

work_threads=4

# the method of selecting group to upload files

# 0: round robin

# 1: specify group

# 2: load balance, select the max free space group to upload file

store_lookup=1

# which group to upload file

# when store_lookup set to 1, must set store_group to the group name

store_group=group1

# which storage server to upload file

# 0: round robin (default)

# 1: the first server order by ip address

# 2: the first server order by priority (the minimal)

store_server=0

# which path(means disk or mount point) of the storage server to upload file

# 0: round robin

# 2: load balance, select the max free space path to upload file

store_path=0

# which storage server to download file

# 0: round robin (default)

# 1: the source storage server which the current file uploaded to

download_server=0

# reserved storage space for system or other applications.

# if the free(available) space of any stoarge server in

# a group <= reserved_storage_space,

# no file can be uploaded to this group.

# bytes unit can be one of follows:

### G or g for gigabyte(GB)

### M or m for megabyte(MB)

### K or k for kilobyte(KB)

### no unit for byte(B)

### XX.XX% as ratio such as reserved_storage_space = 10%

reserved_storage_space = 10%

#standard log level as syslog, case insensitive, value list:

### emerg for emergency

### alert

### crit for critical

### error

### warn for warning

### notice

### info

### debug

log_level=info

#unix group name to run this program,

#not set (empty) means run by the group of current user

run_by_group=

#unix username to run this program,

#not set (empty) means run by current user

run_by_user=

# allow_hosts can ocur more than once, host can be hostname or ip address,

# "*" means match all ip addresses, can use range like this: 10.0.1.[1-15,20] or

# host[01-08,20-25].domain.com, for example:

# allow_hosts=10.0.1.[1-15,20]

# allow_hosts=host[01-08,20-25].domain.com

allow_hosts=*

# sync log buff to disk every interval seconds

# default value is 10 seconds

sync_log_buff_interval = 10

# check storage server alive interval seconds

check_active_interval = 120

# thread stack size, should >= 64KB

# default value is 64KB

thread_stack_size = 64KB

# auto adjust when the ip address of the storage server changed

# default value is true

storage_ip_changed_auto_adjust = true

# storage sync file max delay seconds

# default value is 86400 seconds (one day)

# since V2.00

storage_sync_file_max_delay = 86400

# the max time of storage sync a file

# default value is 300 seconds

# since V2.00

storage_sync_file_max_time = 300

# if use a trunk file to store several small files

# default value is false

# since V3.00

use_trunk_file = true

# the min slot size, should <= 4KB

# default value is 256 bytes

# since V3.00

slot_min_size = 256

# the max slot size, should > slot_min_size

# store the upload file to trunk file when it‘s size <= this value

# default value is 16MB

# since V3.00

slot_max_size = 16MB

# the trunk file size, should >= 4MB

# default value is 64MB

# since V3.00

trunk_file_size = 64MB

# if create trunk file advancely

# default value is false

# since V3.06

trunk_create_file_advance = false

# the time base to create trunk file

# the time format: HH:MM

# default value is 02:00

# since V3.06

trunk_create_file_time_base = 02:00

# the interval of create trunk file, unit: second

# default value is 38400 (one day)

# since V3.06

trunk_create_file_interval = 86400

# the threshold to create trunk file

# when the free trunk file size less than the threshold, will create

# the trunk files

# default value is 0

# since V3.06

trunk_create_file_space_threshold = 20G

# if check trunk space occupying when loading trunk free spaces

# the occupied spaces will be ignored

# default value is false

# since V3.09

# NOTICE: set this parameter to true will slow the loading of trunk spaces

# when startup. you should set this parameter to true when neccessary.

trunk_init_check_occupying = false

# if ignore storage_trunk.dat, reload from trunk binlog

# default value is false

# since V3.10

# set to true once for version upgrade when your version less than V3.10

trunk_init_reload_from_binlog = false

# the min interval for compressing the trunk binlog file

# unit: second

# default value is 0, 0 means never compress

# FastDFS compress the trunk binlog when trunk init and trunk destroy

# recommand to set this parameter to 86400 (one day)

# since V5.01

trunk_compress_binlog_min_interval = 0

# if use storage ID instead of IP address

# default value is false

# since V4.00

use_storage_id = false

# specify storage ids filename, can use relative or absolute path

# since V4.00

storage_ids_filename = storage_ids.conf

# id type of the storage server in the filename, values are:

## ip: the ip address of the storage server

## id: the server id of the storage server

# this paramter is valid only when use_storage_id set to true

# default value is ip

# since V4.03

id_type_in_filename = ip

# if store slave file use symbol link

# default value is false

# since V4.01

store_slave_file_use_link = false

# if rotate the error log every day

# default value is false

# since V4.02

rotate_error_log = false

# rotate error log time base, time format: Hour:Minute

# Hour from 0 to 23, Minute from 0 to 59

# default value is 00:00

# since V4.02

error_log_rotate_time=00:00

# rotate error log when the log file exceeds this size

# 0 means never rotates log file by log file size

# default value is 0

# since V4.02

rotate_error_log_size = 0

# if use connection pool

# default value is false

# since V4.05

use_connection_pool = false

# connections whose the idle time exceeds this time will be closed

# unit: second

# default value is 3600

# since V4.05

connection_pool_max_idle_time = 3600

# HTTP port on this tracker server

http.server_port=8080

http.disabled=true

# HTTP服务是否不生效

# check storage HTTP server alive interval seconds

# <= 0 for never check

# default value is 30

http.check_alive_interval=30

# check storage HTTP server alive type, values are:

# tcp : connect to the storge server with HTTP port only,

# do not request and get response

# http: storage check alive url must return http status 200

# default value is tcp

http.check_alive_type=tcp

# check storage HTTP server alive uri/url

# NOTE: storage embed HTTP server support uri: /status.html

http.check_alive_uri=/status.html

7.2 storage.conf配置内容

# is this config file disabled

# false for enabled

# true for disabled

disabled=false

# the name of the group this storage server belongs to

group_name=group1

# bind an address of this host

# empty for bind all addresses of this host

bind_addr=192.168.1.244

# if bind an address of this host when connect to other servers

# (this storage server as a client)

# true for binding the address configed by above parameter: "bind_addr"

# false for binding any address of this host

client_bind=true

# the storage server port

port=23000

# connect timeout in seconds

# default value is 30s

connect_timeout=30

# network timeout in seconds

# default value is 30s

network_timeout=60

# heart beat interval in seconds

heart_beat_interval=30

# disk usage report interval in seconds

stat_report_interval=60

# the base path to store data and log files

base_path=/home/fastdfs/storage

# max concurrent connections the server supported

# default value is 256

# more max_connections means more memory will be used

max_connections=1000

# the buff size to recv / send data

# this parameter must more than 8KB

# default value is 64KB

# since V2.00

buff_size = 256KB

# accept thread count

# default value is 1

# since V4.07

accept_threads=1

# work thread count, should <= max_connections

# work thread deal network io

# default value is 4

# since V2.00

work_threads=4

# if disk read / write separated

## false for mixed read and write

## true for separated read and write

# default value is true

# since V2.00

disk_rw_separated = true

# disk reader thread count per store base path

# for mixed read / write, this parameter can be 0

# default value is 1

# since V2.00

disk_reader_threads = 1

# disk writer thread count per store base path

# for mixed read / write, this parameter can be 0

# default value is 1

# since V2.00

disk_writer_threads = 1

# when no entry to sync, try read binlog again after X milliseconds

# must > 0, default value is 200ms

sync_wait_msec=50

# after sync a file, usleep milliseconds

# 0 for sync successively (never call usleep)

sync_interval=0

# storage sync start time of a day, time format: Hour:Minute

# Hour from 0 to 23, Minute from 0 to 59

sync_start_time=00:00

# storage sync end time of a day, time format: Hour:Minute

# Hour from 0 to 23, Minute from 0 to 59

sync_end_time=23:59

# write to the mark file after sync N files

# default value is 500

write_mark_file_freq=500

# path(disk or mount point) count, default value is 1

store_path_count=1

# store_path#, based 0, if store_path0 not exists, it‘s value is base_path

# the paths must be exist

store_path0=/home/fastdfs/data

#store_path1=/home/yuqing/fastdfs2

# subdir_count * subdir_count directories will be auto created under each

# store_path (disk), value can be 1 to 256, default value is 256

subdir_count_per_path=256

# tracker_server can ocur more than once, and tracker_server format is

# "host:port", host can be hostname or ip address

tracker_server=192.168.1.244:22122

#standard log level as syslog, case insensitive, value list:

### emerg for emergency

### alert

### crit for critical

### error

### warn for warning

### notice

### info

### debug

log_level=info

#unix group name to run this program,

#not set (empty) means run by the group of current user

run_by_group=

#unix username to run this program,

#not set (empty) means run by current user

run_by_user=

# allow_hosts can ocur more than once, host can be hostname or ip address,

# "*" means match all ip addresses, can use range like this: 10.0.1.[1-15,20] or

# host[01-08,20-25].domain.com, for example:

# allow_hosts=10.0.1.[1-15,20]

# allow_hosts=host[01-08,20-25].domain.com

allow_hosts=*

# the mode of the files distributed to the data path

# 0: round robin(default)

# 1: random, distributted by hash code

file_distribute_path_mode=0

# valid when file_distribute_to_path is set to 0 (round robin),

# when the written file count reaches this number, then rotate to next path

# default value is 100

file_distribute_rotate_count=100

# call fsync to disk when write big file

# 0: never call fsync

# other: call fsync when written bytes >= this bytes

# default value is 0 (never call fsync)

fsync_after_written_bytes=0

# sync log buff to disk every interval seconds

# must > 0, default value is 10 seconds

sync_log_buff_interval=10

# sync binlog buff / cache to disk every interval seconds

# default value is 60 seconds

sync_binlog_buff_interval=10

# sync storage stat info to disk every interval seconds

# default value is 300 seconds

sync_stat_file_interval=300

# thread stack size, should >= 512KB

# default value is 512KB

thread_stack_size=512KB

# the priority as a source server for uploading file.

# the lower this value, the higher its uploading priority.

# default value is 10

upload_priority=10

# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a

# multi aliases split by comma. empty value means auto set by OS type

# default values is empty

if_alias_prefix=

# if check file duplicate, when set to true, use FastDHT to store file indexes

# 1 or yes: need check

# 0 or no: do not check

# default value is 0

check_file_duplicate=0

# file signature method for check file duplicate

## hash: four 32 bits hash code

## md5: MD5 signature

# default value is hash

# since V4.01

file_signature_method=hash

# namespace for storing file indexes (key-value pairs)

# this item must be set when check_file_duplicate is true / on

key_namespace=FastDFS

# set keep_alive to 1 to enable persistent connection with FastDHT servers

# default value is 0 (short connection)

keep_alive=0

# you can use "#include filename" (not include double quotes) directive to

# load FastDHT server list, when the filename is a relative path such as

# pure filename, the base path is the base path of current/this config file.

# must set FastDHT server list when check_file_duplicate is true / on

# please see INSTALL of FastDHT for detail

##include /home/yuqing/fastdht/conf/fdht_servers.conf

# if log to access log

# default value is false

# since V4.00

use_access_log = false

# if rotate the access log every day

# default value is false

# since V4.00

rotate_access_log = false

# rotate access log time base, time format: Hour:Minute

# Hour from 0 to 23, Minute from 0 to 59

# default value is 00:00

# since V4.00

access_log_rotate_time=00:00

# if rotate the error log every day

# default value is false

# since V4.02

rotate_error_log = false

# rotate error log time base, time format: Hour:Minute

# Hour from 0 to 23, Minute from 0 to 59

# default value is 00:00

# since V4.02

error_log_rotate_time=00:00

# rotate access log when the log file exceeds this size

# 0 means never rotates log file by log file size

# default value is 0

# since V4.02

rotate_access_log_size = 0

# rotate error log when the log file exceeds this size

# 0 means never rotates log file by log file size

# default value is 0

# since V4.02

rotate_error_log_size = 0

# if skip the invalid record when sync file

# default value is false

# since V4.02

file_sync_skip_invalid_record=false

# if use connection pool

# default value is false

# since V4.05

use_connection_pool = false

# connections whose the idle time exceeds this time will be closed

# unit: second

# default value is 3600

# since V4.05

connection_pool_max_idle_time = 3600

# use the ip address of this storage server if domain_name is empty,

# else this domain name will ocur in the url redirected by the tracker server

http.domain_name=

# the port of the web server on this storage server

http.server_port=8888

http.disabled=true

7.3 ngnix.conf配置内容

#user nobody;

worker_processes 1;

#error_log logs/error.log;

#error_log logs/error.log notice;

#error_log logs/error.log info;

#pid logs/nginx.pid;

events {

worker_connections 1024;

}

http {

include mime.types;

default_type application/octet-stream;

#log_format main ‘$remote_addr - $remote_user [$time_local] "$request" ‘

# ‘$status $body_bytes_sent "$http_referer" ‘

# ‘"$http_user_agent" "$http_x_forwarded_for"‘;

#access_log logs/access.log main;

sendfile on;

#tcp_nopush on;

#keepalive_timeout 0;

keepalive_timeout 65;

#gzip on;

# upstream fdfs_group1 {

# server 192.168.1.244:80 weight=1 max_fails=2 fail_timeout=30s;

# }

server {

listen 80;

server_name localhost;

#charset koi8-r;

#access_log logs/host.access.log main;

location /group1/M00 {

root /home/fastdfs/data/data;

ngx_fastdfs_module;

}

location / {

root html;

index index.html index.htm;

}

#error_page 404 /404.html;

# redirect server error pages to the static page /50x.html

error_page 500 502 503 504 /50x.html;

location = /50x.html {

root html;

}

# proxy the PHP scripts to Apache listening on 127.0.0.1:80

#location ~ \.php$ {

# proxy_pass http://127.0.0.1;

# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000

#location ~ \.php$ {

# root html;

# fastcgi_pass 127.0.0.1:9000;

# fastcgi_index index.php;

# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;

# include fastcgi_params;

# deny access to .htaccess files, if Apache‘s document root

# concurs with nginx‘s one

#location ~ /\.ht {

# deny all;

}

# another virtual host using mix of IP-, name-, and port-based configuration

#server {

# listen 8000;

# listen somename:8080;

# server_name somename alias another.alias;

# location / {

# root html;

# index index.html index.htm;

# }

# HTTPS server

#server {

# listen 443 ssl;

# server_name localhost;

# ssl_certificate cert.pem;

# ssl_certificate_key cert.key;

# ssl_session_cache shared:SSL:1m;

# ssl_session_timeout 5m;

# ssl_ciphers HIGH:!aNULL:!MD5;

# ssl_prefer_server_ciphers on;

# location / {

# root html;

# index index.html index.htm;

# }

}

7.4 mod_fastdfs.conf配置内容

# connect timeout in seconds

# default value is 30s

connect_timeout=2

# network recv and send timeout in seconds

# default value is 30s

network_timeout=30

# the base path to store log files

base_path=/home/fastdfs/mod_fastdfs

# if load FastDFS parameters from tracker server

# since V1.12

# default value is false

load_fdfs_parameters_from_tracker=true

# storage sync file max delay seconds

# same as tracker.conf

# valid only when load_fdfs_parameters_from_tracker is false

# since V1.12

# default value is 86400 seconds (one day)

storage_sync_file_max_delay = 86400

# if use storage ID instead of IP address

# same as tracker.conf

# valid only when load_fdfs_parameters_from_tracker is false

# default value is false

# since V1.13

use_storage_id = false

# specify storage ids filename, can use relative or absolute path

# same as tracker.conf

# valid only when load_fdfs_parameters_from_tracker is false

# since V1.13

storage_ids_filename = storage_ids.conf

# FastDFS tracker_server can ocur more than once, and tracker_server format is

# "host:port", host can be hostname or ip address

# valid only when load_fdfs_parameters_from_tracker is true

tracker_server=192.168.1.244:22122

# the port of the local storage server

# the default value is 23000

storage_server_port=23000

# the group name of the local storage server

group_name=group1

# if the url / uri including the group name

# set to false when uri like /M00/00/00/xxx

# set to true when uri like ${group_name}/M00/00/00/xxx, such as group1/M00/xxx

# default value is false

url_have_group_name = true

# path(disk or mount point) count, default value is 1

# must same as storage.conf

store_path_count=1

# store_path#, based 0, if store_path0 not exists, it‘s value is base_path

# the paths must be exist

# must same as storage.conf

store_path0=/home/fasfdfs/data

#store_path1=/home/yuqing/fastdfs1

# standard log level as syslog, case insensitive, value list:

### emerg for emergency

### alert

### crit for critical

### error

### warn for warning

### notice

### info

### debug

log_level=info

# set the log filename, such as /usr/local/apache2/logs/mod_fastdfs.log

# empty for output to stderr (apache and nginx error_log file)

log_filename=

# response mode when the file not exist in the local file system

## proxy: get the content from other storage server, then send to client

## redirect: redirect to the original storage server (HTTP Header is Location)

response_mode=proxy

# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a

# multi aliases split by comma. empty value means auto set by OS type

# this paramter used to get all ip address of the local host

# default values is empty

if_alias_prefix=

# use "#include" directive to include HTTP config file

# NOTE: #include is an include directive, do NOT remove the # before include

#include http.conf

# if support flv

# default value is false

# since v1.15

flv_support = true

# flv file extension name

# default value is flv

# since v1.15

flv_extension = flv

# set the group count

# set to none zero to support multi-group

# set to 0 for single group only

# groups settings section as [group1], [group2], ..., [groupN]

# default value is 0

# since v1.14

group_count = 1

# group settings for group #1

# since v1.14

# when support multi-group, uncomment following section

[group1]

group_name=group1

storage_server_port=23000

store_path_count=1

store_path0=/home/fastdfs/data

#store_path1=/home/yuqing/fastdfs1

# group settings for group #2

# since v1.14

# when support multi-group, uncomment following section as neccessary

#[group2]

#group_name=group2

#storage_server_port=23000

#store_path_count=1

#store_path0=/home/yuqing/fastdfs

7.5 client.conf配置内容

# connect timeout in seconds

# default value is 30s

connect_timeout=30

# network timeout in seconds

# default value is 30s

network_timeout=60

# the base path to store log files

base_path=/home/fastdfs/client

# tracker_server can ocur more than once, and tracker_server format is

# "host:port", host can be hostname or ip address

tracker_server=192.168.1.244:22122

#standard log level as syslog, case insensitive, value list:

### emerg for emergency

### alert

### crit for critical

### error

### warn for warning

### notice

### info

### debug

log_level=info

# if use connection pool

# default value is false

# since V4.05

use_connection_pool = false

# connections whose the idle time exceeds this time will be closed

# unit: second

# default value is 3600

# since V4.05

connection_pool_max_idle_time = 3600

# if load FastDFS parameters from tracker server

# since V4.05

# default value is false

load_fdfs_parameters_from_tracker=false

# if use storage ID instead of IP address

# same as tracker.conf

# valid only when load_fdfs_parameters_from_tracker is false

# default value is false

# since V4.05

use_storage_id = false

# specify storage ids filename, can use relative or absolute path

# same as tracker.conf

# valid only when load_fdfs_parameters_from_tracker is false

# since V4.05

storage_ids_filename = storage_ids.conf

#HTTP settings

http.tracker_server_port=80

#use "#include" directive to include HTTP other settiongs

#include http.conf

FastDFS5.02安装说明

标签：

原文地址：http://my.oschina.net/ydsakyclguozi/blog/395877

踩

(0)

评论一句话评论（0）

分享档案

更多>

2021年07月29日 (22)
2021年07月28日 (40)
2021年07月27日 (32)
2021年07月26日 (79)
2021年07月23日 (29)
2021年07月22日 (30)
2021年07月21日 (42)
2021年07月20日 (16)
2021年07月19日 (90)
2021年07月16日 (35)

周排行