码迷,mamicode.com
首页 > 其他好文 > 详细

Topshelf Configuration z

时间:2015-04-24 22:35:23      阅读:171      评论:0      收藏:0      [点我收藏+]

标签:

Topshelf Configuration

While the Quickstart gives you enough to get going, there are many more features available in Topshelf. The following details the configuration options available, and how to use them in Topshelf services.

Service Name

Specify the base name of the service, as it is registered in the services control manager. This setting is optional and by default uses the namespace of the Program.cs file (well, basically, the calling assembly type namespace).

HostFactory.New(x =>
{
    x.SetServiceName("MyService");
});

It is recommended that service names not contains spaces or other whitespace characters.

Each service on the system must have a unique name. If you need to run multiple instances of the same service, consider using the InstanceName command-line option when registering the service.

Service Description

Specify the description of the service in the services control manager. This is optional and defaults to the service name.

HostFactory.New(x =>
{
    x.SetDescription("My First Topshelf Service");
});

Display Name

Specify the display name of the service in the services control manager. This is optional and defaults to the service name.

HostFactory.New(x =>
{
    x.SetDisplayName("MyService");
});

Instance Name

Specify the instance name of the service, which is combined with the base service name and separated by a $. This is optional, and is only added if specified.

HostFactory.New(x =>
{
    x.SetInstanceName("MyService");
});

This option is typically set using the command-line argument, but it allowed here for completeness.

Service Configuration

The service can be configured in multiple ways, each with different goals. For services that can handle a dependency on Topshelf, the ServiceControl interface provides a lot of value for implementing the service control methods. Additionally, a zero-dependency solution is also available when lambda methods can be used to call methods in the service class.

Simple Service

To configure a simple service, the easiest configuration method is available.

HostFactory.New(x =>
{
    x.Service<MyService>();
});

// Service implements the ServiceControl methods directly and has a default constructor
class MyService : ServiceControl
{}

If the service does not have a default constructor, the constructor can be specified, allowing the service to be created by the application, such as when a container needs to be used.

HostFactory.New(x =>
{
    x.Service<MyService>(() => ObjectFactory.GetInstance<MyService>());
});

// Service implements the ServiceControl methods directly and has a default constructor
class MyService : ServiceControl
{
    public MyService(SomeDependency dependency)
    {}
}

If the service needs access to the HostSettings during construction, they are also available as an overload.

HostFactory.New(x =>
{
    x.Service<MyService>(hostSettings => new MyService(hostSettings));
});

// Service implements the ServiceControl methods directly and has a default constructor
class MyService : ServiceControl
{
    public MyService(HostSettings settings)
    {}
}

Custom Service

To configure a completely custom service, such as one that has no dependencies on Topshelf, the following configuration is available.

HostFactory.New(x =>
{
    x.Service<MyService>(sc =>
    {
        sc.ConstructUsing(() => new MyService());

        // the start and stop methods for the service
        sc.WhenStarted(s => s.Start());
        sc.WhenStopped(s => s.Stop());

        // optional pause/continue methods if used
        sc.WhenPaused(s => s.Pause());
        sc.WhenContinued(s => s.Continue());

        // optional, when shutdown is supported
        sc.WhenShutdown(s => s.Shutdown());
    });
});

Each of the WhenXxx methods can also take an argument of the HostControl interface, which can be used to request the service be stopped, request additional start/stop time, etc.

HostFactory.New(x =>
{
    x.Service<MyService>(sc =>
    {
        sc.WhenStarted((s, hostControl) => s.Start(hostControl));
    }
}

The HostControl interface can be retained and used as the service is running to Stop the service.

Service Start Modes

There are multiple service start modes, each of which can be specified by the configuration. This option is only used if the service is being installed.

HostFactory.New(x =>
{
    x.StartAutomatically(); // Start the service automatically
    x.StartAutomaticallyDelayed(); // Automatic (Delayed) -- only available on .NET 4.0 or later
    x.StartManually(); // Start the service manually
    x.Disabled(); // install the service as disabled
});

Service Recovery

Topshelf also exposes the options need to configure the service recovery options as well.

HostFactory.New(x =>
{
    x.EnableServiceRecovery(r =>
    {
        //you can have up to three of these
        r.RestartComputer(5, "message");
        r.RestartService(0);
        //the last one will act for all subsequent failures
        r.RunProgram(7, "ping google.com");

        //should this be true for crashed or non-zero exits
        r.OnCrashOnly();

        //number of days until the error count resets
        r.SetResetPeriod(1);
    });
});

Service Identity

Services can be configured to run as a number of different identities, using the configuration option that is most appropriate.

HostFactory.New(x =>
{
    x.RunAs("username", "password");
});

Runs the service using the specified username and password. This can also be configured using the command-line.

HostFactory.New(x =>
{
    x.RunAsPrompt();
});

When the service is installed, the installer will prompt for the username/password combination used to launch the service.

HostFactory.New(x =>
{
    x.RunAsNetworkService();
});

Runs the service using the NETWORK_SERVICE built-in account.

HostFactory.New(x =>
{
    x.RunAsLocalSystem();
});

Runs the service using the local system account.

HostFactory.New(x =>
{
    x.RunAsLocalService();
});

Runs the service using the local service account.

Custom Install Actions

These settings allow user-specified code to be executed during the service install/uninstall process.

Before Install Actions

Topshelf allows actions to be specified that are executed before the service is installed. Note that this action is only executed if the service is being installed.

HostFactory.New(x =>
{
    x.BeforeInstall(() => { ... });
});

After Install Actions

Topshelf allows actions to be specified that are executed after the service is installed. Note that this action is only executed if the service is being installed.

HostFactory.New(x =>
{
    x.AfterInstall(() => { ... });
});

Before Uninstall Actions

Topshelf allows actions to be specified that are executed before the service is uninstalled. Note that this action is only executed if the service is being uninstalled.

HostFactory.New(x =>
{
    x.BeforeUninstall(() => { ... });
});

After Uninstall Actions

Topshelf allows actions to be specified that are executed after the service is uninstalled. Note that this action is only executed if the service is being uninstalled.

HostFactory.New(x =>
{
    x.AfterUninstall(() => { ... });
});

Service Dependencies

Service dependencies can be specified such that the service does not start until the dependent services are started. This is managed by the windows services control manager, and not by Topshelf itself.

HostFactory.New(x =>
{
    x.DependsOn("SomeOtherService");
});

There are a number of built-in extension methods for well-known services, including:

HostFactory.New(x =>
{
    x.DependsOnMsmq(); // Microsoft Message Queueing
    x.DependsOnMsSql(); // Microsoft SQL Server
    x.DependsOnEventLog(); // Windows Event Log
    x.DependsOnIis(); // Internet Information Server
});

Advanced Settings

EnablePauseAndContinue

Specifies that the service supports pause and continue, allowing the services control manager to pass pause and continue commands to the service.

HostFactory.New(x =>
{
    x.EnablePauseAndContinue();
});

EnableShutdown

Specifies that the service supports the shutdown service command, allowing the services control manager to quickly shutdown the service.

HostFactory.New(x =>
{
    x.EnableShutdown();
});

Service Recovery

To configure the service recovery options, a configurator is available to specify one or more service recovery actions. The recovery options are only used when installing the service, and are set once the service has been successfully installed.

HostFactory.New(x =>
{
    x.EnableServiceRecovery(rc =>
    {
        rc.RestartService(1); // restart the service after 1 minute
        rc.RestartSystem(1, "System is restarting!"); // restart the system after 1 minute
        rc.RunProgram(1, "notepad.exe"); // run a program
        rc.SetResetPeriod(1); // set the reset interval to one day
    })
});

The recovery actions are executed in the order specified, with the next action being executed after the previous action was run and the service failed again. There is a limit (based on the OS) of how many actions can be executed, and is typically 2-3 actions.

Topshelf Configuration z

标签:

原文地址:http://www.cnblogs.com/zeroone/p/4454776.html

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!