码迷,mamicode.com
首页 > 其他好文 > 详细

LVS 集群配置

时间:2015-04-27 15:30:34      阅读:141      评论:0      收藏:0      [点我收藏+]

标签:lvs   ha   

用yum安装(先检查下yum是否可用,如果可用,就用yum安装)

#yum install ipvsadm piranha


修改LVS配置

#cd /etc/sysconfig/ha/

先对lvs默认配置文件进行备份,再创建新的配置文件

#mv lvs.cf lvs.cf.back

#vi lvs.cf   ####内容如下


serial_no = 39

primary = 10.5.20.12

service = lvs

backup_active = 1

backup = 10.5.20.13

heartbeat = 1

heartbeat_port = 539

keepalive = 3

deadtime = 9

network = direct

debug_level = NONE

monitor_links = 0

syncdaemon = 0

virtual XP {

     active = 1

     address = 10.5.20.14 bond0:0

     vip_nmask = 255.255.255.0

     port = 80

     send = "GET / HTTP/1.0\r\n\r\n"

     expect = "HTTP"

     use_regex = 0

     load_monitor = none

     scheduler = wlc

     protocol = tcp

     timeout = 5

     reentry = 5

     quiesce_server = 0

     server xp1 {

         address = 10.5.20.12

         active = 1

         weight = 1

     }

     server xp2 {

         address = 10.5.20.13

         active = 1

         weight = 1

     }

}


在两台物理机上分别启动心跳服务:
#  service pulse start
Starting pulse:                                            [  OK  ]
这时,能在主物理机10.5.20.12上看到负载均衡网卡已启动,
而10.5.20.13上是没有这个网卡的:
# ifconfig

bond0     Link encap:Ethernet  HWaddr 00:0C:29:E9:2F:F0  

          inet addr:10.5.20.12  Bcast:10.5.23.255  Mask:255.255.252.0

          inet6 addr: fe80::20c:29ff:fee9:2ff0/64 Scope:Link

          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1

          RX packets:2039549 errors:0 dropped:0 overruns:0 frame:0

          TX packets:692572 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0 

          RX bytes:748901428 (714.2 MiB)  TX bytes:153254084 (146.1 MiB)


bond0:0   Link encap:Ethernet  HWaddr 00:0C:29:E9:2F:F0  

          inet addr:10.5.20.14  Bcast:10.5.20.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1

当主物理机的服务关闭时,在10.5.20.13上看到网卡已启动:
# ifconfig

bond0     Link encap:Ethernet  HWaddr 00:0C:29:4C:FC:A4  

          inet addr:10.5.20.13  Bcast:10.5.23.255  Mask:255.255.252.0

          inet6 addr: fe80::20c:29ff:fe4c:fca4/64 Scope:Link

          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1

          RX packets:19679 errors:0 dropped:0 overruns:0 frame:0

          TX packets:16633 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0 

          RX bytes:18527316 (17.6 MiB)  TX bytes:1528599 (1.4 MiB)


bond0:0   Link encap:Ethernet  HWaddr 00:0C:29:4C:FC:A4  

          inet addr:10.5.20.14  Bcast:10.5.20.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1



查看虚拟服务器状态:
# ipvsadm -ln

IP Virtual Server version 1.2.1 (size=4096)

Prot LocalAddress:Port Scheduler Flags

  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn

TCP  10.5.20.14:80 wlc


将服务设成开机自启动:
# chkconfig --level 345 pulse on

本文出自 “石头” 博客,请务必保留此出处http://410477.blog.51cto.com/400477/1639030

LVS 集群配置

标签:lvs   ha   

原文地址:http://410477.blog.51cto.com/400477/1639030

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!