标签：
Custom Parameter-id Creation
By Abhijit Daptary, Capgemini India
Step1: Creation of parameter ID.?
Parameter ID can be created in the table TPARA. Just enter the name of the parameter id in the table and that parameter ID will be created.?
? ?
Go to the table maintenance generator of the table TPARA and go to the?Maintain?button through the transaction SM30.?
Enter the table view name TPARA.?
? ?
Click on the maintain button. The following information will appear. Click on the Tick button or the ENTER button to go to the next screen.?
? ?
Enter the Set/Get parameter id as the parameter ID you want to create. Here, I will be creating the parameter Id as ZNAME_DATA1. Click on?ENTER?button.?
? ?
It will ask for the text of the parameter Id. Enter the text of the parameter ID and click on the?Savebutton.?
? ?
? ?
Enter the Package and the transport number.?
The parameter id can be seen in the table?TPARA.?
? ?
Step2: Using the parameter Id that you have created.?
Now go to the?SE11?transaction for creating a data element and enter the parameter id at theFurther Characteristics?tab at the parameter Id section.?
? ?
Activate the data element and use it with the program. It will act the same good as a standard one.
? ?
来自 <http://saptechnical.com/Tutorials/ABAP/ParameterID/custom.htm>
? ?
? ?
标准程序的Parameter id 并不一定准确
2014年12月30日
10:36
Exp.
? ?
Me39
F1 看到的是VRT
? ?
? ?
程序中:
根据不同的配置 id可能各不相同
MODULE?d0205_get_parameter?OUTPUT.
? ?
??DATA:?gv_cc_flag?TYPE?c?LENGTH?1.
? ?
*?Belegnummer?über?Parameter-Id?nur?holen,?wenn?noch?nicht?anderweitig
*?vorbelegt?ist?(z.B.?in?ME38-Aufruf?aus?ME57)
??CHECK?rm06e-evrtn?EQ?space.???????????????????????????????"4.0B?TK
??CASE?t160-bstyp.
????WHEN?bstyp-kont.
??????GET?PARAMETER?ID?‘CTR‘?FIELD?rm06e-evrtn.
??????GET?PARAMETER?ID?‘CCNN‘?FIELD?gv_cc_flag.
??????IF?gv_cc_flag?IS?NOT?INITIAL.
????????GET?PARAMETER?ID?‘CCTR‘?FIELD?rm06e-evrtn.??????????"CCM?EhP4
????????CLEAR?gv_cc_flag.
????????SET?PARAMETER?ID?‘CCNN‘?FIELD?gv_cc_flag.
??????ENDIF.
????WHEN?bstyp-lfpl.
??????GET?PARAMETER?ID?‘SAG‘?FIELD?rm06e-evrtn.
????WHEN?space.
??????GET?PARAMETER?ID?‘VRT‘?FIELD?rm06e-evrtn.
??ENDCASE.
? ?
ENDMODULE.?????????????????"?D0205_GET_PARAMETER??OUTPUT
? ?
一个字段可能出现在多个场合
但是定义是不一样的
? ?
sap的标准程序可能都是用一个字段(同一个dataelemnt)
然后技术信息里面看到的parameter id 并不是程序中实际对应的id
导致跨程序调用传值失败
? ?
标签：
原文地址：http://www.cnblogs.com/rootbin/p/4463314.html
