标签：tar strong art os cti linux
在VMware里克隆出来的CentOS Linux。。
ifconfig...没有看到eth0.。然后重启网卡又报下面错误。
故障现象：
service network restart
Shutting down loopback
insterface:
[ OK ]
Bringing up loopback
insterface:
[ OK ]
Bringing up interface
eth0: Device eth0 does not seem to be present,delaying
initialization.
[FAILED]
解决办法：
首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：
# vi
/etc/udev/rules.d/70-persistent-net.rules
# This file was automatically
generated by the /lib/udev/write_net_rules
# program, run by the
persistent-net-generator.rules rules file.
#
# You can modify it, as long
as you keep each rule on a single
# line, and change only the value of the
NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net",
ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7",
ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000
(pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth1"
记录下，eth1网卡的mac地址00:0c:29:50:bd:17
接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0
# vi
/etc/sysconfig/network-scripts/ifcfg-eth0
将
DEVICE="eth0" 改成 DEVICE="eth1" ,
将
HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后，重启网络
# service network restart
或者
# /etc/init.d/network
restart
正常了
Vmware 克隆CentOS 网络IP配置,布布扣,bubuko.com
标签：tar strong art os cti linux
原文地址：http://www.cnblogs.com/yu2000/p/3784534.html
