码迷,mamicode.com
首页 > 其他好文 > 详细

F?l?e?x?4?+?s?p?r?i?n?g?+?h?i?b?e?r?n?a?t?e?+?B?l?a?z?e?D?S?整合案例

时间:2014-06-15 13:32:00      阅读:254      评论:0      收藏:0      [点我收藏+]

标签:flex4   spring   hibernate   blazeds   

http://wenku.baidu.com/link?url=7v5xAyD2nvChQRT60QewpvAASFHMZNvD0OxX11OASYvae8jbVNsr5I000TwwYOlChzq05c50utxcLVb6mRL_r1pSFM1QZ2p9hJvRnpeT-T7

前提是系统安装好flex插件,Myeclipse,jdk,tomcat,并将flex插件集成到Myeclipse中

http://hi.baidu.com/xzwangyu/item/5bdc91c3c3439d310831c65c

一、将webProject和flex4、Blazeds整合

1、下载?B?l?a?z?e?D?S?,地址为:

2、打开Myeclipse,建立web project(eclipse为dynamic web project),如图(图中项目名称为MyFlexPro2实际为MyflexPro):

bubuko.com,布布扣

2、解压缩?B?l?a?z?e?D?S?,将web-inf下所有文件,拷贝覆盖项目的web-inf中,然后发布到tomcat,运行tomcat。

3、之后如下图所示,为项目添加flex项目类型:

bubuko.com,布布扣

bubuko.com,布布扣


下图中的根URL没有改正,应为http://localhost:8080/MyflexPro

bubuko.com,布布扣

点击上图验证配置,通过后才能finish,根文件夹为发布到的tomcat服务器中项目所在路径


finish后,项目大致框架如下图,项目上会出现错误,项目上右键选择属性,解决flex的编译位置为src和java冲突,如下图更改:

bubuko.com,布布扣

ok后,项目即正常。

因为默认生成的MyflexPro.mxml默认在src下,我们手动拷贝到flex_src下,将src下的删除即可。


另外,项目还可能有错误,但是就是找不到项目中哪个文件报错,此时,打开Problems视图,如下:

bubuko.com,布布扣

解决办法如下图:

bubuko.com,布布扣


可能又报出如下错误:

bubuko.com,布布扣


错误原因如下图的注释方式<!-- -->不能在js代码中添加,将其改为//注释方式即可。

bubuko.com,布布扣


测试代码如下图:

bubuko.com,布布扣

bubuko.com,布布扣


访问结果页面:

bubuko.com,布布扣

二、整合Spring

2.1、添加JAR包如下:

org.springframework.aop-3.1.1.RELEASE.jar
org.springframework.asm-3.1.1.RELEASE.jar
org.springframework.beans-3.1.1.RELEASE.jar
org.springframework.context-3.1.1.RELEASE.jar
org.springframework.context.support-3.1.1.RELEASE.jar
org.springframework.core-3.1.1.RELEASE.jar
org.springframework.expression-3.1.1.RELEASE.jar
org.springframework.jdbc-3.1.1.RELEASE.jar
org.springframework.orm-3.1.1.RELEASE.jar
org.springframework.transaction-3.1.1.RELEASE.jar
org.springframework.web-3.1.1.RELEASE.jar
com.springsource.net.sf.cglib-2.2.0.jar
com.springsource.org.aopalliance-1.0.0.jar
com.springsource.org.apache.commons.logging-1.1.1.jar
com.springsource.org.aspectj.tools-1.6.6.RELEASE.jar 

com.springsource.org.aspectj.weaver-1.6.8.RELEASE.jar 

javassist-3.11.0.GA.jar

jta-1.1.jar    (缺少会报Caused by: java.lang.ClassNotFoundException: javax.transaction.TransactionManager错误)

dom4j-1.6.1.jar (缺少会报Caused by: java.lang.ClassNotFoundException: org.dom4j.DocumentException错误)
slf4j-api-1.6.6.jar(缺少会报Caused by: java.lang.ClassNotFoundException: org.slf4j.LoggerFactory错误)
slf4j-log4j12-1.6.6.jar(会警告,hibernate无任何打印信息)

2.2、在项目下新建源文件夹(source folder)conf,新建xml文件applicationContext.xml,内容如下:

<?xml version="1.0"?>
<beans xmlns="http://www.springframework.org/schema/beans"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
	xmlns:aop="http://www.springframework.org/schema/aop"
	xmlns:context="http://www.springframework.org/schema/context" 
	xmlns:tx="http://www.springframework.org/schema/tx"
	xmlns:jaxws="http://cxf.apache.org/jaxws"
	xsi:schemaLocation="http://www.springframework.org/schema/beans 
						http://www.springframework.org/schema/beans/spring-beans-3.0.xsd 
						http://www.springframework.org/schema/aop 
						http://www.springframework.org/schema/aop/spring-aop-3.0.xsd 
						http://www.springframework.org/schema/context 
						http://www.springframework.org/schema/context/spring-context-3.0.xsd 
						http://www.springframework.org/schema/tx 
						http://www.springframework.org/schema/tx/spring-tx-3.0.xsd 
						http://cxf.apache.org/jaxws http://cxf.apache.org/schemas/jaxws.xsd ">
	
	
</beans>

2.3、在web.xml中web-app节点下添加监听,如下:

	<context-param>
		<param-name>contextConfigLocation</param-name>
		<param-value>classpath:applicationContext.xml</param-value>
	</context-param>
	<listener>
		<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
	</listener>

启动项目,即可看到输出中加载了applicationContext配置文件。

三、整合hibernate

3.1、添加一下JAR包:

hibernate3.jar
ojdbc14.jar
c3p0-0.9.1.jar

commons-collections-3.1.jar (缺失则报Caused by: java.lang.ClassNotFoundException: org.apache.commons.collections.map.LRUMap错误)

3.2、添加数据库连接配置文件到conf目录下

jdbc.properties

jdbc.driverclass=oracle.jdbc.driver.OracleDriver
jdbc.url=jdbc:oracle:thin:@192.168.1.201:1521:sunlight
hibernate.dialect=org.hibernate.dialect.OracleDialect
jdbc.username=its
jdbc.password=vehicle

c3p0.acquireIncrement=5
c3p0.initialPoolSize=30
c3p0.minPoolSize=30
c3p0.maxPoolSize=100
c3p0.maxStatements=0
c3p0.maxStatementsPerConnection=5
c3p0.checkoutTimeout=30000
c3p0.idleConnectionTestPeriod=60

#hibernate.hbm2ddl.auto=none
hibernate.hbm2ddl.auto=update
hibernate.show_sql=true

在applicationContext.xml中添加如下内容(组件扫描 节点下的内容需要做相应更改):

	<!-- 分散配置,指定属性文件地址 -->
	<context:property-placeholder location="classpath:jdbc.properties"/>
	<!-- 组件扫描 -->
	<context:component-scan base-package="com.zxn.project.dao.impl,com.zxn.project.service.impl" />
	<!-- 配置c3p0数据源 -->
	<bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource">
		<property name="driverClass" value="${jdbc.driverclass}" />
		<property name="jdbcUrl" value="${jdbc.url}" />
		<property name="user" value="${jdbc.username}" />
		<property name="password" value="${jdbc.password}" />
		
		<property name="acquireIncrement" value="${c3p0.acquireIncrement}" />
		<property name="initialPoolSize" value="${c3p0.initialPoolSize}" />
		<property name="minPoolSize" value="${c3p0.minPoolSize}" />
		<property name="maxPoolSize" value="${c3p0.maxPoolSize}" />
		<property name="maxStatements" value="${c3p0.maxStatements}" />
		<property name="maxStatementsPerConnection" value="${c3p0.maxStatementsPerConnection}" />
		<property name="checkoutTimeout" value="${c3p0.checkoutTimeout}" />
		<property name="idleConnectionTestPeriod" value="${c3p0.idleConnectionTestPeriod}" />
	</bean>
	
	<!-- 本地会话工厂bean(spring整合hibernate资源和核心入口)-->
	<bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean">
		<property name="dataSource" ref="dataSource" />
		<property name="hibernateProperties">
			<props>
				<prop key="hibernate.dialect">${hibernate.dialect}</prop>
				<prop key="hibernate.hbm2ddl.auto">${hibernate.hbm2ddl.auto}</prop>
				<prop key="hibernate.show_sql">${hibernate.show_sql}</prop>
			</props>
		</property>
		<property name="mappingDirectoryLocations">
			<list>
				<value>classpath:com/zxn/project/domain</value>
			</list>
		</property>
	</bean>
	
	<!-- hibernate事务管理器,在service层面上实现事务管理,能够达到平台无关性 -->
	<bean id="txManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager">
		<property name="sessionFactory" ref="sessionFactory" />
	</bean>
	
	<!-- 事务通知 -->
	<tx:advice id="txAdvice" transaction-manager="txManager">
		<tx:attributes>
			<tx:method name="save*" propagation="REQUIRED" isolation="DEFAULT"/>
			<tx:method name="update*" propagation="REQUIRED" isolation="DEFAULT"/>
			<tx:method name="delete*" propagation="REQUIRED" isolation="DEFAULT"/>
			<tx:method name="batch*" propagation="REQUIRED" isolation="DEFAULT"/>
			
			<tx:method name="get*" propagation="REQUIRED" isolation="DEFAULT" read-only="true"/>
			<tx:method name="load*" propagation="REQUIRED" isolation="DEFAULT" read-only="true"/>
			<tx:method name="find*" propagation="REQUIRED" isolation="DEFAULT" read-only="true"/>
			
			<tx:method name="*" propagation="REQUIRED" isolation="DEFAULT" read-only="true"/>
		</tx:attributes>
	</tx:advice>
	
	<bean id="hibernateTemplate" class="org.springframework.orm.hibernate3.HibernateTemplate">
		<property name="sessionFactory" ref="sessionFactory"></property>
	</bean>
	
	<!-- aop配置 -->
	<aop:config>
		<aop:advisor advice-ref="txAdvice" pointcut="execution(* *..*Service.*(..))"/>
	</aop:config>

3.3、新建SpringFactory.java内容如下(我是手动集成,该类没自动生成):

package cn.dyst.vmamcm.aftsrv.util;
import org.springframework.context.ApplicationContext;
import org.springframework.web.context.support.WebApplicationContextUtils;
import org.springframework.beans.BeansException;
import org.springframework.beans.factory.NoSuchBeanDefinitionException;

import flex.messaging.FactoryInstance;
import flex.messaging.FlexFactory;
import flex.messaging.config.ConfigMap;
import flex.messaging.services.ServiceException;

/**
 * This interface is implemented by factory components which provide
 * instances to the flex messaging framework.  To configure flex data services
 * to use this factory, add the following lines to your services-config.xml
 * file (located in the WEB-INF/flex directory of your web application).
 *
 *	<factories>
 *     <factory id="spring" class="flex.samples.factories.SpringFactory" />
 *  </factories>
 *
 * You also must configure the web application to use spring and must copy the spring.jar
 * file into your WEB-INF/lib directory.  To configure your app server to use spring,
 * you add the following lines to your WEB-INF/web.xml file:
 *
 *   <context-param>
 *        <param-name>contextConfigLocation</param-name>
 *        <param-value>/WEB-INF/applicationContext.xml</param-value>
 *   </context-param>
 *
 *   <listener>
 *       <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
 *   </listener>
 * 
 * Then you put your spring bean configuration in WEB-INF/applicationContext.xml (as per the
 * line above).  For example:
 * 
 *  <?xml version="1.0" encoding="UTF-8"?>
 *  <!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN" "http://www.springframework.org/dtd/spring-beans.dtd">
 *   
 *  <beans>
 *    <bean name="weatherBean" class="dev.weather.WeatherService" singleton="true"/>
 *  </beans>
 *  
 * Now you are ready to define a destination in flex that maps to this existing service. 
 * To do this you'd add this to your WEB-INF/flex/remoting-config.xml:
 *
 *  <destination id="WeatherService">
 *      <properties>
 *          <factory>spring</factory>
 *          <source>weatherBean</source>
 *      </properties>
 *  </destination>
 *
 * @author Jeff Vroom
 */
public class SpringFactory implements FlexFactory
{
    private static final String SOURCE = "source";

    /**
     * This method can be used to initialize the factory itself.  It is called with configuration
     * parameters from the factory tag which defines the id of the factory.  
     */
    public void initialize(String id, ConfigMap configMap) {}

    /**
     * This method is called when we initialize the definition of an instance 
     * which will be looked up by this factory.  It should validate that
     * the properties supplied are valid to define an instance.
     * Any valid properties used for this configuration must be accessed to 
     * avoid warnings about unused configuration elements.  If your factory 
     * is only used for application scoped components, this method can simply
     * return a factory instance which delegates the creation of the component
     * to the FactoryInstance's lookup method.
     */
    public FactoryInstance createFactoryInstance(String id, ConfigMap properties)
    {
        SpringFactoryInstance instance = new SpringFactoryInstance(this, id, properties);
        instance.setSource(properties.getPropertyAsString(SOURCE, instance.getId()));
        return instance;
    } // end method createFactoryInstance()

    /**
     * Returns the instance specified by the source
     * and properties arguments.  For the factory, this may mean
     * constructing a new instance, optionally registering it in some other
     * name space such as the session or JNDI, and then returning it
     * or it may mean creating a new instance and returning it.
     * This method is called for each request to operate on the
     * given item by the system so it should be relatively efficient.
     * <p>
     * If your factory does not support the scope property, it
     * report an error if scope is supplied in the properties
     * for this instance.
     */
    public Object lookup(FactoryInstance inst)
    {
        SpringFactoryInstance factoryInstance = (SpringFactoryInstance) inst;
        return factoryInstance.lookup();
    } 


    static class SpringFactoryInstance extends FactoryInstance
    {
        SpringFactoryInstance(SpringFactory factory, String id, ConfigMap properties)
        {
            super(factory, id, properties);
        }


        public String toString()
        {
            return "SpringFactory instance for id=" + getId() + " source=" + getSource() + " scope=" + getScope();
        }

        public Object lookup() 
        {
            ApplicationContext appContext = WebApplicationContextUtils.getWebApplicationContext(flex.messaging.FlexContext.getServletConfig().getServletContext());
            String beanName = getSource();

            try
            {
                return appContext.getBean(beanName);
            }
            catch (NoSuchBeanDefinitionException nexc)
            {
                ServiceException e = new ServiceException();
                String msg = "Spring service named '" + beanName + "' does not exist.";
                e.setMessage(msg);
                e.setRootCause(nexc);
                e.setDetails(msg);
                e.setCode("Server.Processing");
                throw e;
            }
            catch (BeansException bexc)
            {
                ServiceException e = new ServiceException();
                String msg = "Unable to create Spring service named '" + beanName + "' ";
                e.setMessage(msg);
                e.setRootCause(bexc);
                e.setDetails(msg);
                e.setCode("Server.Processing");
                throw e;
            } 
        }
        
    } 

} 

之后,在 services-config.xml文件中配置如下:

     <factories>
        <factory id="spring" class="cn.dyst.vmamcm.aftsrv.util.SpringFactory"/>
    </factories>
最后,在remoting-config.xml中添加代码(举例)如下:

	<destination id="xxxService">
		<properties>
			<factory>spring</factory>
			<source>xxxService</source>
		</properties> 
	</destination> 

就可以在页面访问数据库了。

四、添加Log4j到项目中

4.1、添加jar包

log4j-1.2.17.jar

4.2、添加log4j.properties配置文件到conf目录下,

内容如下:

### set log levels - for more verbose logging change 'info' to 'debug' ###
log4j.rootLogger=warn, stdout, file, error

### direct log messages to stdout ###
log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.Target=System.out
log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
log4j.appender.stdout.layout.ConversionPattern=%d{ABSOLUTE} %5p %c{1}:%L - %m%n

### direct messages to file ###
log4j.appender.file=org.apache.log4j.DailyMaxRollingFileAppender
log4j.appender.file.layout=org.apache.log4j.PatternLayout
log4j.appender.file.layout.ConversionPattern=%d{yyyy-MM-dd HH:mm:ss} [%t:%r]-[%p] %m%n
log4j.appender.file.File=/log.log
log4j.appender.file.datePattern='.'yyyy-MM-dd'.log'
log4j.appender.file.maxBackupIndex=30
og4j.appender.file.Append=true
log4j.appender.file.Threshold=debug

### direct exception messages to separate file ###
log4j.appender.error=org.apache.log4j.DailyMaxRollingFileAppender
log4j.appender.error.File=/error.log
log4j.appender.error.Append=true
log4j.appender.error.Threshold=error
log4j.appender.error.layout=org.apache.log4j.PatternLayout
log4j.appender.error.datePattern='.'yyyy-MM-dd'.log'
### 设置日志最多保存的天数 ###
log4j.appender.error.maxBackupIndex=30
log4j.appender.error.layout.ConversionPattern=%d{yyyy-MM-dd HH:mm:ss} [%t:%r]-[%p] %m%n

#log4j.logger.org.hibernate=info
log4j.logger.org.hibernate=info

### log HQL query parser activity
#log4j.logger.org.hibernate.hql.ast.AST=debug

### log just the SQL
#log4j.logger.org.hibernate.SQL=debug

### log JDBC bind parameters ###
log4j.logger.org.hibernate.type=info
#log4j.logger.org.hibernate.type=debug

### log schema export/update ###
log4j.logger.org.hibernate.tool.hbm2ddl=debug

### log HQL parse trees
#log4j.logger.org.hibernate.hql=debug

### log cache activity ###
#log4j.logger.org.hibernate.cache=debug

### log transaction activity
#log4j.logger.org.hibernate.transaction=debug

### log JDBC resource acquisition
#log4j.logger.org.hibernate.jdbc=debug

### enable the following line if you want to track down connection ###
### leakages when using DriverManagerConnectionProvider ###
#log4j.logger.org.hibernate.connection.DriverManagerConnectionProvider=trace
整合完毕。

F?l?e?x?4?+?s?p?r?i?n?g?+?h?i?b?e?r?n?a?t?e?+?B?l?a?z?e?D?S?整合案例,布布扣,bubuko.com

F?l?e?x?4?+?s?p?r?i?n?g?+?h?i?b?e?r?n?a?t?e?+?B?l?a?z?e?D?S?整合案例

标签:flex4   spring   hibernate   blazeds   

原文地址:http://blog.csdn.net/zxnlmj/article/details/25160919

(0)
(0)
   
举报
评论 一句话评论(0
登录后才能评论!
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!