一、环境
系统:CentOS 6.4x64最小化安装
ha-keep-m:192.168.3.15
ha-keep-s:192.168.3.22
httpd-16:192.168.3.16
httpd-17:192.168.3.17
VIP：192.168.3.28
二、在ha-keep-m和ha-keep-s上安装haproxy
[root@ha-keep-s ~]# rpm -ivh http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm Retrieving http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm warning: /var/tmp/rpm-tmp.9Aawka: Header V3 RSA/SHA256 Signature, key ID 0608b895: NOKEY Preparing... ########################################### [100%] 1:epel-release ########################################### [100%] [root@ha-keep-s ~]# sed -i ‘s@#b@b@g‘ /etc/yum.repos.d/epel.repo [root@ha-keep-s ~]# sed -i ‘s@mirrorlist@#mirrorlist@g‘ /etc/yum.repos.d/epel.repo [root@ha-keep-s ~]# yum install haproxy -y
配置haproxy的日志编辑文件/etc/sysconfig/rsyslog
[root@ha-keep-s ~]# cat /etc/sysconfig/rsyslog # Options for rsyslogd # Syslogd options are deprecated since rsyslog v3. # If you want to use them, switch to compatibility mode 2 by "-c 2" # See rsyslogd(8) for more details SYSLOGD_OPTIONS="-c 2"
增加日志设备
[root@ha-keep-s ~]# grep haproxy.log /etc/rsyslog.conf local2.* /var/log/haproxy.log [root@ha-keep-s ~]# service rsyslog restart Shutting down system logger: [ OK ] Starting system logger: [ OK ]
haproxy配置文件内容如下
[root@ha-keep-m ~]# cat /etc/haproxy/haproxy.cfg #--------------------------------------------------------------------- # Example configuration for a possible web application. See the # full configuration options online. # # http://haproxy.1wt.eu/download/1.4/doc/configuration.txt # #--------------------------------------------------------------------- #--------------------------------------------------------------------- # Global settings #--------------------------------------------------------------------- global # to have these messages end up in /var/log/haproxy.log you will # need to: # # 1) configure syslog to accept network log events. This is done # by adding the ‘-r‘ option to the SYSLOGD_OPTIONS in # /etc/sysconfig/syslog # # 2) configure local2 events to go to the /var/log/haproxy.log # file. A line like the following can be added to # /etc/sysconfig/syslog # # local2.* /var/log/haproxy.log # log 127.0.0.1 local2 chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon # turn on stats unix socket stats socket /var/lib/haproxy/stats #--------------------------------------------------------------------- # common defaults that all the ‘listen‘ and ‘backend‘ sections will # use if not designated in their block #--------------------------------------------------------------------- defaults mode http log global option httplog option dontlognull option http-server-close option forwardfor except 127.0.0.0/8 option redispatch retries 3 timeout http-request 10s timeout queue 1m timeout connect 10s timeout client 1m timeout server 1m timeout http-keep-alive 10s timeout check 10s maxconn 3000 #--------------------------------------------------------------------- # main frontend which proxys to the backends #--------------------------------------------------------------------- frontend http bind *:80 mode http log global option logasap #option forwardfor option dontlognull option forwardfor except 127.0.0.0/8 capture request header Host len 20 capture request header Referer len 20 default_backend web frontend healthcheck bind :1099 mode http option httpclose #option forwardfor default_backend web backend web balance roundrobin server web16 192.168.3.16:80 check maxconn 2000 server web17 192.168.3.17:80 check maxconn 2000 #--------------------------------------------------------------------- # static backend for serving up images, stylesheets and such #--------------------------------------------------------------------- #--------------------------------------------------------------------- # round robin balancing between the various backends #---------------------------------------------------------------------
将配置文件复制到ha-keep-s上，然后启动haproxy服务
[root@ha-keep-s ~]# service haproxy start Starting haproxy: [ OK ] [root@ha-keep-s ~]# netstat -anpt |grep haproxy tcp 0 0 0.0.0.0:1099 0.0.0.0:* LISTEN 22340/haproxy tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 22340/haproxy #开放80端口 [root@ha-keep-s ~]# iptables -I INPUT -p tcp --dport 80 -j ACCEPT [root@ha-keep-s ~]# service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] #测试 [root@ha-keep-s ~]# curl http://192.168.3.22 httpd-17 [root@ha-keep-s ~]# curl http://192.168.3.22 httpd-16 [root@ha-keep-s ~]# curl http://192.168.3.22 httpd-17 [root@ha-keep-s ~]# curl http://192.168.3.22 httpd-16 [root@ha-keep-s ~]# curl http://192.168.3.15 httpd-17 [root@ha-keep-s ~]# curl http://192.168.3.15 httpd-16 [root@ha-keep-s ~]# curl http://192.168.3.15 httpd-17 [root@ha-keep-s ~]# curl http://192.168.3.15 httpd-16 #以上结果显示2台haproxy都能正常代理后端的web server
三、在ha-keep-m和ha-keep-s上安装keepalived，安装过程相同，这里只给出ha-keep-m的操作过程
[root@ha-keep-m ~]# yum install openssl openssl-devel -y
[root@ha-keep-m ~]# wget http://www.keepalived.org/software/keepalived-1.2.13.tar.gz
[root@ha-keep-m ~]# tar xf keepalived-1.2.13.tar.gz
[root@ha-keep-m ~]# cd keepalived-1.2.13
[root@ha-keep-m keepalived-1.2.13]# ./configure
[root@ha-keep-m keepalived-1.2.13]# make && make install
#将keepalived配置成开机启动
[root@ha-keep-m keepalived-1.2.13]# cp /usr/local/etc/rc.d/init.d/keepalived /etc/init.d/
[root@ha-keep-m keepalived-1.2.13]# cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
[root@ha-keep-m keepalived-1.2.13]# mkdir /etc/keepalived
[root@ha-keep-m keepalived-1.2.13]# ln -s /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/
[root@ha-keep-m keepalived-1.2.13]# ln -s /usr/local/sbin/keepalived /usr/sbin/
#备份keepalived.conf文件
[root@ha-keep-m keepalived-1.2.13]# cp /etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf.bak
#keepalived配置文件内容如下
[root@ha-keep-m keepalived-1.2.13]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
lyao@weyee.com #配置管理员邮箱
}
notification_email_from root #配置发件人
smtp_server 127.0.0.1 #配置邮件服务器
smtp_connect_timeout 30
router_id haproxy-m
}
vrrp_script check_haproxy {
script "/etc/keepalived/check_haproxy.sh" #定义haproxy状态检查脚本
intervar 1
weight -5
fail 2
rise 1
}
vrrp_instance VI_1 {
state MASTER #配置模式
interface eth0
virtual_router_id 99
priority 101 #配置优先级
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.3.28 #配置虚拟IP地址
}
notify_master /etc/keepalived/to_master.sh #这里指定的是切换成master状态时要执行的通知脚本
notify_backup /etc/keepalived/to_backup.sh #这里指定的是切换成backup状态时要执行的通知脚本
notify_fault /etc/keepalived/to_fault.sh #这里指定的是切换成fault状态时要执行的通知脚本
track_script {
check_haproxy
}
}编写check_haproxy,to_master.sh,to_backup.sh,to_fault.sh
#haproxy的检查脚本
[root@ha-keep-m ~]# cat /etc/keepalived/check_haproxy.sh
A=`ps -C haproxy --no-header |wc -l`
if [ $A -eq 0 ]; then
/etc/init.d/haproxy start
sleep 2
if [ `ps -C haproxy --no-header |wc -l` -eq 0 ]; then
/etc/init.d/keepalived stop
fi
fi
[root@ha-keep-m ~]# chmod +x /etc/keepalived/check_haproxy.sh
#to_master.sh脚本内容，当服务器改变为主时执行此脚本
[root@ha-keep-m ~]# cat /etc/keepalived/to_master.sh
#!/bin/bash
Date=$(date +%F" "%T)
IP=$(ifconfig eth0 |grep "inet addr" |cut -d":" -f2 |awk ‘{print $1}‘)
Mail="lyao@weyee.com" #这里的邮箱地址根据自己的需要更改
echo "$Date `hostname`:$IP change to Master." |mail -s "Master-Backup Change Status" $Mail
[root@ha-keep-m ~]# chmod +x /etc/keepalived/to_master.sh
#to_backup.sh脚本内容，当服务器改变为备时执行此脚本
[root@ha-keep-m ~]# cat /etc/keepalived/to_backup.sh
#!/bin/bash
Date=$(date +%F" "%T)
IP=$(ifconfig eth0 |grep "inet addr" |cut -d":" -f2 |awk ‘{print $1}‘)
Mail="lyao@weyee.com"
echo "$Date `hostname`:$IP change to Backup." |mail -s "Master-Backup Change Status" $Mail
[root@ha-keep-m ~]# chmod +x /etc/keepalived/to_backup.sh
#to_fault.sh脚本内容，当服务器改变为故障时执行此脚本
[root@ha-keep-m ~]# cat /etc/keepalived/to_fault.sh
#!/bin/bash
Date=$(date +%F" "%T)
IP=$(ifconfig eth0 |grep "inet addr" |cut -d":" -f2 |awk ‘{print $1}‘)
Mail="lyao@weyee.com"
echo "$Date `hostname`:$IP change to Fault." |mail -s "Master-Backup Change Status" $Mail
[root@ha-keep-m ~]# chmod +x /etc/keepalived/to_fault.sh
#启动keepalived服务
[root@ha-keep-m ~]# service keepalived start
[root@ha-keep-m ~]# ps aux |grep keepalived |grep -v grep
root 24068 0.0 0.0 39888 988 ? Ss 15:32 0:00 keepalived -D
root 24070 0.0 0.2 44064 2188 ? S 15:32 0:00 keepalived -D
root 24071 0.0 0.1 44064 1564 ? S 15:32 0:00 keepalived -D
#在iptables中对vrrp协议进行放行
[root@ha-keep-m ~]# iptables -I INPUT -p vrrp -j ACCEPT
[root@ha-keep-m ~]# iptables -L -n
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT 112 -- 0.0.0.0/0 0.0.0.0/0
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
Chain FORWARD (policy ACCEPT)
target prot opt source destination
REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
#测试访问http://192.168.3.28能够正常访问后端服务器
[root@ha-keep-m ~]# curl http://192.168.3.28
httpd-17
[root@ha-keep-m ~]# curl http://192.168.3.28
httpd-16
[root@ha-keep-m ~]# curl http://192.168.3.28
httpd-17
[root@ha-keep-m ~]# curl http://192.168.3.28
httpd-16
[root@ha-keep-m ~]# curl http://192.168.3.28
httpd-17 ha-keep-s的keepalived.conf文件内容如下
[root@ha-keep-s keepalived-1.2.13]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
lyao@weyee.com #配置管理员邮箱
}
notification_email_from root #配置发件人
smtp_server 127.0.0.1 #配置邮件服务器
smtp_connect_timeout 30
router_id haproxy-s #用来标识主机
}
vrrp_script check_haproxy {
script "/etc/keepalived/check_haproxy.sh"
intervar 1
weight -5
fail 2
rise 1
}
vrrp_instance VI_1 {
state BACKUP #配置模式，修改这里
interface eth0
virtual_router_id 99
priority 90 #配置优先级
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.3.28 #配置虚拟IP地址
}
notify_master /etc/keepalived/to_master.sh #这里指定的是切换成master状态时要执行的通知脚本
notify_backup /etc/keepalived/to_backup.sh #这里指定的是切换成backup状态时要执行的通知脚本
notify_fault /etc/keepalived/to_fault.sh #这里指定的是切换成fault状态时要执行的通知脚本
track_script {
check_haproxy
}
}
#启动keepalived
[root@ha-keep-s keepalived-1.2.13]# service keepalived start
Starting keepalived: [ OK ]
#放行vrrp协议
[root@ha-keep-s keepalived-1.2.13]# iptables -I INPUT -p vrrp -j ACCEPT
[root@ha-keep-s keepalived-1.2.13]# service iptables save
iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] 2台keepalived都启动后，查看VIP情况
#在ha-keep-m上查看 [root@ha-keep-m ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:9a:39:42 brd ff:ff:ff:ff:ff:ff inet 192.168.3.15/24 brd 192.168.3.255 scope global eth0 inet 192.168.3.28/32 scope global eth0 inet6 fe80::20c:29ff:fe9a:3942/64 scope link valid_lft forever preferred_lft forever #在ha-keep-s上查看 [root@ha-keep-s ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:d8:d9:a6 brd ff:ff:ff:ff:ff:ff inet 192.168.3.22/24 brd 192.168.3.255 scope global eth0 inet6 fe80::20c:29ff:fed8:d9a6/64 scope link valid_lft forever preferred_lft forever #查看结果显示VIP正常
四、测试结果
通过curl进行测试
#这个时候VIP是在ha-keep-m上的 [root@httpd-16 ~]# curl http://192.168.3.28 httpd-16 [root@httpd-16 ~]# curl http://192.168.3.28 httpd-17 [root@httpd-16 ~]# curl http://192.168.3.28 httpd-16 [root@httpd-16 ~]# curl http://192.168.3.28 httpd-17 #我们将ha-keep-m上的haproxy停止掉，看VIP是否能正常漂移到ha-keep-s上 [root@ha-keep-m ~]# service haproxy stop Stopping haproxy: [ OK ] #在ha-keep-s上查看VIP，显示VIP已成漂移过来 [root@ha-keep-s ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:d8:d9:a6 brd ff:ff:ff:ff:ff:ff inet 192.168.3.22/24 brd 192.168.3.255 scope global eth0 inet 192.168.3.28/32 scope global eth0 inet6 fe80::20c:29ff:fed8:d9a6/64 scope link valid_lft forever preferred_lft forever
[root@httpd-16 ~]# curl http://192.168.3.28 httpd-17 [root@httpd-16 ~]# curl http://192.168.3.28 httpd-16 [root@httpd-16 ~]# curl http://192.168.3.28 httpd-17 [root@httpd-16 ~]# curl http://192.168.3.28 httpd-16
访问结果一切正常，到此haproxy+keepalived配置完成
本文出自 “ly36843运维” 博客，请务必保留此出处http://ly36843.blog.51cto.com/3120113/1657136
原文地址：http://ly36843.blog.51cto.com/3120113/1657136
