wiwiz 虚拟机详细教程

标签：

手动配置电脑ip 外网的网线连接无线路由器的wan口 电脑连接无线路由器lan口（不能用无线连接必须有线连接）

路由的ip地址 192.168.1.1 子网掩码 255.255.255.0

路由器的 DHCP服务 和upnp 关闭
虚拟机服务

VMware NAT Service
VMware DHCP Service  这两项必须开启

下载Wiwiz的虚拟机镜像。下载后解压缩到本地硬盘。双击解压缩后的扩展名是.vmx的文件，VMWare就会自动启动虚拟机

打开虚拟机 选择 移动它
等待虚拟机启动加载完成，直到出现“wiwiz login: ”字样

输入 root

密码 wiwiz-user 上面不会有显示
然后输入

# /usr/local/hsbuilder/hsbuilder_setup.sh setup   

选择
piease select external NIC typically the one going out to the inernet

eth0
piease select internal NIC typically wifi interface

eth1

piease input hotspot ID

你的无线热点ID

piease input user name

你的wiwiz登录账号

piease input server address and

cp.wiwiz.com:80,cp.wiwiz.co.cc:80,cp2.wiwiz.com:80,cp3.wiwiz.com
:80,125,39,111,239:80,123.150.173.239:80,74.117.62.157:80

Do you want DHCP service to be configured? lf you select NO to skip
it, you need to configure DHCP service manually later.

yes

DHCP setting: piease input Network ip
192.168.1.0

DHCP setting:piease input NETMASK
255.255.255.0

DHCP setting:piease input IP of Gateway (it should be the IP of this machine)

193.168.1.250

DHCP setting please input DNS

192.168.124.2

DHCP setting please input IP Range of this Network

192.168.1.10 192.168.1.249

DHCP SERVICE CONFIGURATION completed. THE new
conf iguration file is saved to
/etc/dhcpd.conf.the old conf iguration file isbacked up to /etc/dhcpd.conf.bak

ok

本文章由http://www.wifidog.pro/2015/06/01/wiwiz%E8%99%9A%E6%8B%9F%E6%9C%BA%E8%AF%A6%E7%BB%86%E6%95%99%E7%A8%8B.html 整理编辑，转载请注明出处

wiwiz 虚拟机详细教程

标签：

原文地址：http://www.cnblogs.com/wifidog/p/4545025.html