PowerDesigner 把Comment复制到name中和把name复制到Comment

标签：

在使用PowerDesigner对数据库进行概念模型和物理模型设计时，一般在NAME或Comment中写中文，在Code中写英文。Name用来显 示，Code在代码中使用，但Comment中的文字会保存到数据库Table或Column的Comment中，当Name已经存在的时候，再写一次 Comment很麻烦，可以使用以下代码来解决这个问题

在PowerDesigner中使用方法为：

   PowerDesigner->Tools->Execute Commands->Edit/Run Scripts

将代码Copy进去执行就可以了，是对整个CDM或PDM进行操作

1. ‘代码一:将Name中的字符COPY至Comment中  

Option   Explicit   
ValidationMode   =   True   
InteractiveMode   =   im_Batch  
  
Dim   mdl   ‘   the   current   model  
  
‘   get   the   current   active   model   
Set   mdl   =   ActiveModel   
If   (mdl   Is   Nothing)   Then   
      MsgBox   "There   is   no   current   Model "   
ElseIf   Not   mdl.IsKindOf(PdPDM.cls_Model)   Then   
      MsgBox   "The   current   model   is   not   an   Physical   Data   model. "   
Else   
      ProcessFolder   mdl   
End   If  
  
‘   This   routine   copy   name   into   comment   for   each   table,   each   column   and   each   view   
‘   of   the   current   folder   
Private   sub   ProcessFolder(folder)   
      Dim   Tab   ‘running     table   
      for   each   Tab   in   folder.tables   
            if   not   tab.isShortcut   then   
                  tab.comment   =   tab.name   
                  Dim   col   ‘   running   column   
                  for   each   col   in   tab.columns   
                        col.comment=   col.name   
                  next   
            end   if   
      next  
  
      Dim   view   ‘running   view   
      for   each   view   in   folder.Views   
            if   not   view.isShortcut   then   
                  view.comment   =   view.name   
            end   if   
      next  
  
      ‘   go   into   the   sub-packages   
      Dim   f   ‘   running   folder   
      For   Each   f   In   folder.Packages   
            if   not   f.IsShortcut   then   
                  ProcessFolder   f   
            end   if   
      Next   
end   sub 

另外在使用REVERSE ENGINEER从数据库反向生成PDM的时候，PDM中的表的NAME和CODE事实上都是CODE，为了把NAME替换为数据库中Table或Column的中文Comment，可以使用以下脚本

2.‘代码二:将Comment中的字符COPY至Name中   
  
Option   Explicit   
ValidationMode   =   True   
InteractiveMode   =   im_Batch  
  
Dim   mdl   ‘   the   current   model  
  
‘   get   the   current   active   model   
Set   mdl   =   ActiveModel   
If   (mdl   Is   Nothing)   Then   
      MsgBox   "There   is   no   current   Model "   
ElseIf   Not   mdl.IsKindOf(PdPDM.cls_Model)   Then   
      MsgBox   "The   current   model   is   not   an   Physical   Data   model. "   
Else   
      ProcessFolder   mdl   
End   If  
  
Private   sub   ProcessFolder(folder)   
On Error Resume Next  
      Dim   Tab   ‘running     table   
      for   each   Tab   in   folder.tables   
            if   not   tab.isShortcut   then   
                  tab.name   =   tab.comment  
                  Dim   col   ‘   running   column   
                  for   each   col   in   tab.columns   
                  if col.comment="" then  
                  else  
                        col.name=   col.comment   
                  end if  
                  next   
            end   if   
      next  
  
      Dim   view   ‘running   view   
      for   each   view   in   folder.Views   
            if   not   view.isShortcut   then   
                  view.name   =   view.comment   
            end   if   
      next  
  
      ‘   go   into   the   sub-packages   
      Dim   f   ‘   running   folder   
      For   Each   f   In   folder.Packages   
            if   not   f.IsShortcut   then   
                  ProcessFolder   f   
            end   if   
      Next   
end   sub  

PowerDesigner 把Comment复制到name中和把name复制到Comment

标签：

原文地址：http://www.cnblogs.com/tkin/p/4546869.html