标签：des class http tar ext com
sh run (show running-config)
enable disable login logout exit end
enable password
privilege level(global)
privilege level(line)
show interface serial 1/1
disconnect
exit(global)
full-help
help
show ? (show help command)
history
no history
history size
no history size
show history
terminal history
menu
no menu
menu menu-name
menu clear-screen
menu command
menu default
menu line-mode
menu option
menu prompt
menu single-space
menu status-line
menu text
menu title
more exclude
more include
more begin
show begin
show exclude
show include
show any-command | begin regular-expression
more any-command | begin regular-expression
show history
terminal editing
terminal no editing
terminal full-help
terminal history
terminal no history
show users
setup
show version
erase nvram
show running-config
show startup-config
activation-character ascii-number
no activation-character
autobaud
no autobaud
buffer-length length
no buffer-length
databits {5|6|7|8}
no databits
data-character-bits {7|8}
no data-character-bits
terminal databits
terminal data-character-bits
default-value exe-character-bits {7|8}
no default-value exe-character-bits
default-value special-character-bits {7|8}
no default-value special-character-bits
exec-character-bits {7 | 8}
no exec-character-bits
legth
terminal exec-character-bits
terminal special-character-bits
disconnect-character ascii-number
no disconnect-character
dispatch-character ascii-number1
no dispatch-character ascii-number1
dispatch-machine name
no dispatch-machine
dispatch-timeout milliseconds
no dispatch-timeout
state-machine
terminal dispatch-character
escape-character {break | char | default | none | soft} (to define a system escape character)
no escape-character [soft]
default escape-character [soft]
control + v or control + v (to abort present process)
terminal escape-character (to set the escape key for the active terminal line session)
show line (display information about the specific line connection,or all the lines)
hold-character ascii-number (to define the local character used to pause output to the terminal screen)
no hold-character (to restore the default)
terminal hold-character
insecure (to configure a line as insecure)
no insecure
length screen-length (to set the terminal screen length)
no length
terminal length
location text (to provide a description of the location of a serial device)
no location
lockable (to enable use of the lock EXEC command)
no lockable
lock (prevent access to your session by other users )
logout-warning [seconds] (to warn users of an impending forced timeout)
no logout-warning
absolute-timeout (sets the interval for closing user connections on a specific line or port)
session-timeout (sets the interval for closing the connection when tree is no input or output traffic)
notify (to enable terminal notification about pending output from other Telnet connection)
no notify
terminal notify (configures a line to inform a user that has multiple,concurrent Telnet connections when output is pending on a connection other than the current one)
padding ascii-number count (to set the padding on a specific output character)
no padding ascii-number
terminal padding (changes the character padding on a specific output character for the current session)
parity {none | even | odd | space | mark} (to define generation of a parity bit)
no parity
terminal parity (defines the generation of the parity bit for the current for the current session and line)
printer printer-name {line number | rotary number} [newline-convert | formfeed] (to configure a printer and assign a server tty line or lines to it)
no printer
clear line (return a terminal line to idle state)
private (to save user EXEC command changes between terminal session)
no private
exec-timeout (sets the interval that the EXEC command interpreter waits until user input is detected )
show whoami [text] (to display information about the terminal line of the current user,including host name,line number,line speed,and location)
special-character-bits {7 | 8} (to configure the number of data bits per character for special characters such as software flow control characters and escape characters)
no special-character-bits
default-value exec-character-bits
default-value special-characte-bits
exec-character-bits
terminal exec-character-bits
terminal special-character-bits
state-machine name state first-character last-character [nextstate | transmit] (to specify the transition criteria for the state of a particular state madhine)
no state-machine
dispatch-machine
dispatch-character
dispatch-timeout
stopbits {1 | 1.5 | 2} (to set the number of the stop bits transmitted per byte)
no stopbits
terminal stopbits
terminal databits {5 |6 | 7 | 8} (to change the number of data bits per character for the current terminal line for this session)
terminal parity (defines the generation of the parity bit for the current terminal line and session)
terminal data-character-bits {7 | 8} (to set the number of data bits per character that are interpreted and generated by the Cisco IOS software for the current line and session)
terminal dispatch-character ascii-number [ascii-number2…ascii-number] (to define a character that causes a packet to be sent for the current session)
terminal dispatch-timeout
terminal download (to temporarily set the ability of a line to act as a transparent pipe for file transfers for the current session) =terminal telnet transparent = terminal no escape-character = terminal no hold-character = terminal no padding 0 = terminal no padding 128 = terminal parity none = terminal data bits 8
terminal escape-character
terminal exec-character-bits
terminal flowcontrol {none | software [in | out] | hardware} (to set flow control for the current terminal line for the current session)
terminal hold-character
terminal no hold-character
terminal keymap-type keymap-name (to specify the current keyboard type for the current session)
terminal length screen-length (to set the number of lines on the current terminal screen for the current session)
terminal monitor (to display debug command output and system error messages for the current terminal and session)
terminal notify (to enable terminal notification about pending output from other Telnet connections for the current session)
terminal no notify
notify (enables terminal notification about pending output from other Telnet connection)
terminal padding
terminal parity {none | even | odd | space | mark} (to define the generation of the parity bit for the current terminal line and session)
terminal-queue entry-retry-interval interval (to change the retry interval for a terminal port queue)
no terminal-queue entry-retry-interval
terminal rxspeed bps (to set the terminal receive speed(how fast information is sent to the terminal)for the current line and session)
respeed (sets the terminal receive speed for a specific line or lines)
terminal txspeed (sets the terminal transmit speed for a specified line or lines)
terminal speed bps (sets the transmit and receive speed for the current session)
terminal special-character-bits
terminal start-character
terminal stopbits {1 | 1.5 | 2} (to change the number of stop bits sent per byte by the current terminal line during an active session)
terminal stop-character
terminal telnet break-on-ip (to cause an access server to generate a hardware Break signal when an interrupt-process (ip)command is received)
terminal telnet ip-on-break (configures the system to send an interrupt-process (ip) signal when the Break command is issued)
terminal telnet refuse-negotiations (to configure the current session to refuse to negotiate full-duplex,remote who options on incoming connections)
terminal telnet speed default-speed maximum-speed (to allow an access server to negotiate transmission speed for the current terminal line and session)
terminal telnet sync-on-break (to cause the access server to send a Telnet Synchronize signal when it receives a Telnet Break signal on the current line and session)
terminal telnet transparent (to cause the current terminal line to send a Return character (CR) as a CR followed by a NULL instead of a CR followed by a Line Feed (LF) for the current session)
terminal terminal-type terminal-type (to specify the type of terminal connected to the current line for the current session)
terminal txspeed bps (to set the terminal transmit speed (how fast the terminal can send information ) for the current line and session)
terminal-type {terminal-name | terminal-type} (to specify the type of terminal connected to a line)
no terminal-type
terminal worth characters (to set the number of character colums on the terminal screen for the current line for a session)
where (to list the open sessions)
width characters (to set the terminal screen width)
no width
banner exec d message d (to specify and enable a message to be displayed when an EXEC process is created(an EXEC banner))
banner incoming d message d (to define and enable a banner to be displayed when there is an incoming connection to a terminal line from a host on the network)
no banner incoming
banner login d message d (to define and enable a customized banner to be displayed before the username and password login prompts)
no banner login
banner motd d message d (to define and enble a message-of the-day (MOTD) banner)
no banner motd
banner slip-ppp d message d (to customise the banner that is displayed when a SLIP or PPP connection is made)
no banner slip ppp
clear tcp {line line-number | local hostname port remote host mane port | tcb address} (to clear a TCP connection)
exec (to allow an EXEC process on a line)
no exec
exec-banner (to reenable the display of EXEC and message-of-the-day (MOTD)banner on the specified line or lines)
no exec-banner
exec-timeout minutes [seconds] (to set the interval that the EXEC command interpreter waits until user input is detected)
no exec-timeout
lock (to configure a temporary password on a line)
menu menu-name clear-screen (to clear the terminal screen before displaying a menu)
menu menu-name command jeu-item {command | menu-exit} (to specify underlying commands for user menus)
menu menu-name default menu-item (to specify the menu item to use as the default)
menu menu-name line-mode (to require the user to press Enter after specifying an item)
menu menu-name options menu-item {login | pause} (to set options for items in user menus)
menu menu-name prompt d prompt d (to specify the prompt for a user menu)
menu menu-name single-space (to display menu items single-spaced rather than double-spaced)
menu menu-name status-line (to display a line of status information about the current user at the top of a menu)
menu menu-name text menu-item menu-text (to specify the text of a menu item in a use menu)
menu menu-name title d menu-title d (to create a title (banner) for a user menu)
no menu menu-name (to delete a user menu from the configuration file)
motd-banner (to enable the display of message-of-the-day(MOTD) banners on the specified line or lines)
no motd-banner
name-connection (to assign a logical name to a connection)
refuse-message d message d (to define and enable a line-in-use message)
no refuse-message
send {line-number | * | aux number | console number | tty number | sty number} (to send messages to one or all terminal lines)
service linenumber (to configure the Cisco IOS software to display line number information after the EXEC or incoming banner)
no service linenumber
vacant-message [d message d] (to display an idle terminal message)
no vacant-message
international (to display characters in 8-bur format)
no international
ip http access-class {access-list-number | access-list-name} (to assign an access list to the HTTP setver used by the Cisco IOS ClidkStart software or the Cisco Web browser UI)
no ip http access-class {access-list-number | access-list-name}
ip http authentication {aaa | enable | local | tacacs} (to specify a particular authentication method for HTTP server users)
no ip http authentication {aaa | enable | local | tacacs}
eg : Router(config)#ip http authentication aaa
Router(config)#aaa authentication login défaut local
ip http port port-number (to specify the port to be used by the Cisco IOS ClickStart software or the Cisco Web browser UI)
no ip http port
ip http server (to enable the Cisco Web browser UI on a router or access server)
no ip http server
terminal international (to display characters in 8-bit format)
no terminal international
cd [filesystem:] (to change the default directory or file system)
page 201
CCNA 6.6,布布扣,bubuko.com
CCNA 6.6
标签：des class http tar ext com
原文地址：http://www.cnblogs.com/jilili/p/3795654.html
