树莓派滚动显示

#include <wiringPi.h>
#include <stdio.h>
#include <stdlib.h>

#define DIGIT1 9
#define DIGIT2 13
#define DIGIT3 12
#define DIGIT4 8
#define BTN0 10
#define BTN1 11

#define true 1

char loop[4][8] =   //the loop-running bar in the left windows
    {
        {1,1,1,1,0,0,1,0},//L
        {0,0,0,1,0,0,1,0},//O
        {1,0,0,1,0,0,1,0},//V
        {0,1,1,1,0,0,0,0}//E
    };

void main() 
{
    int pin;
    //int m = 0, n = 0;
    //int flag = 1;
    int chip = 0;
    int chip0,chip1,chip2,chip3;
    int run = 0;
    unsigned int time0 = 0, time1 = 0;

    if (wiringPiSetup () == -1) //test the install status of wiringPi
    {
        exit (1) ;
    }

    for (pin = 0 ; pin < 8 ; ++pin) 
    {
        pinMode (pin, OUTPUT) ;
        digitalWrite(pin, HIGH);
   }

    pinMode(DIGIT1, OUTPUT);
    pinMode(DIGIT2, OUTPUT);
    pinMode(DIGIT3, OUTPUT);
    pinMode(DIGIT4, OUTPUT);
   // pinMode(BTN0, INPUT); //The start button
    pinMode(BTN1, INPUT); //The stop/stop button

    while (true)
    {
        time1 = millis();

        if (digitalRead(BTN1) && run == 0) 
        {
            puts("Start!");
            run = 1;    //change the running state
           // m = 0;
            //n = 0;
            chip = 0;

            time0 = millis();
        }
        else if (digitalRead(BTN0) && run == 1) 
        {
            puts("Stop!");
            run = 0;
       // chip = m =n = 0;
        }

        if (time1 - time0 >= 300 && run == 1) 
        {
            time0 = time1;
//            printf("%d\n", n);
            //m = ++m % 10;
            //n = ++n % 10;

            chip = ++chip % 4;
            //printf("%d\n", n);
        }

        for (pin = 0; pin < 8; pin++)
        {
            digitalWrite(pin, loop[chip][pin]);
        }
        switch(chip){
            case 0:
            digitalWrite(DIGIT1,1);
            break;
            case 1:
            digitalWrite(DIGIT2,1);
            break;
            case 2:
            digitalWrite(DIGIT3,1);
            break;
            case 3:
            digitalWrite(DIGIT4,1);
            break;
        }
        
        delay(180);
        digitalWrite(DIGIT1,0);
        digitalWrite(DIGIT2,0);
        digitalWrite(DIGIT3,0);
        digitalWrite(DIGIT4,0);
        //delay(30);
    }

}