MSP430F149学习之路——LED

 1 #include <msp430x14x.h>
 2 
 3 void int_clk();
 4 void delay(int i);
 5 void main()
 6 {
 7   WDTCTL = WDTPW + WDTHOLD;
 8   int_clk();
 9   P6DIR = 0XFF;
10   P6OUT = 0Xff;
11   while(1)
12   {
13     P6OUT = 0XFF;
14     delay(20000);
15     P6OUT = 0x00;
16     delay(20000);
17   }
18 }
19 
20 void int_clk()
21 {
22   BCSCTL1 &= ~XT2OFF;
23   BCSCTL2 |= SELM_1 + SELS;
24   do
25   {
26     IFG1 &= ~OFIFG;
27     for(int i=0;i<100;i++)
28       _NOP();
29   }while((IFG1 & OFIFG)!=0);
30   IFG1 &= ~OFIFG;
31 }
32 
33 void delay(int i)
34 {
35   while(i--);
36 }

  1 /***********************************************
  2 程序功能：实现流水灯以三种流动方式和四种流动速度
  3           的不同组合而进行点亮"流动"
  4 ------------------------------------------------*/
  5 #include <msp430x14x.h>
  6  int flag=0,i=0,j=0,dir=0,speed=0;
  7 void int_clk();
  8 void delay(int i);
  9 void main()
 10 {
 11   WDTCTL = WDTPW + WDTHOLD;
 12   int_clk();
 13   P6DIR = 0XFF;
 14   P6OUT = 0XFF;
 15   
 16   TACCTL0 = CCIE;                     //使能CCR0中断
 17   TACCR0 = 50000;
 18   TACTL  = TASSEL_2 + MC_1 + ID_3;    //定时器A选择SMCLK，增计数，8分频
 19   
 20   _EINT();
 21   LPM0;
 22 }
 23 /*******************************************
 24 函数名称：Timer_A 
 25 功    能：定时器A的中断服务函数，在这里通过标志
 26           控制流水灯的流动方向和流动速度
 27 参    数：无
 28 返回值  ：无
 29 ********************************************/
 30 #pragma vector=TIMERA0_VECTOR
 31 __interrupt void Timer_A(void)
 32 {
 33   if(flag == 0)
 34   {
 35     P6OUT = ~(0x80>>(i++));    //灯的点亮顺序D8 -> D1
 36   }
 37   else if(flag == 1)
 38   {
 39     P6OUT = ~(0x01<<(i++));    //灯的点亮顺序D1 -> D8
 40   }
 41   else 
 42   {
 43     if(dir)                  //灯的点亮顺序  D8 -> D1,D1 -> D8,循环绕圈                        
 44       P6OUT = ~(0x80>>(i++));
 45     else
 46       P6OUT = ~(0x01<<(i++));
 47   }
 48   
 49   if(i == 8) 
 50   {
 51     i = 0;
 52     dir = ~dir;
 53   }
 54   delay(200);
 55   j++;
 56   if(j == 40) 
 57   {
 58     i = 0;
 59     j = 0;
 60     flag++;
 61     if(flag == 4) flag = 0;
 62     switch(speed)
 63     {
 64     case 0:
 65      // TACTL &=~ (ID0 + ID1);
 66       TACTL |= ID_3;
 67       break;
 68     case 1:
 69      // TACTL &=~ (ID0 + ID1);
 70       TACTL |= ID_2;
 71       break;
 72     case 2:
 73     //  TACTL &=~ (ID0 + ID1);
 74       TACTL |= ID_1;
 75       break;
 76     case 3:
 77      // TACTL &=~ (ID0 + ID1);
 78       TACTL |= ID_0;
 79       break;
 80     default:
 81       break;
 82     }
 83     if(flag != 3)   speed++;
 84     if(speed == 4) speed = 0;
 85     } 
 86 }
 87 void int_clk()
 88 {
 89   BCSCTL1 &= ~XT2OFF;
 90   BCSCTL2 |= SELM_1 + SELS;     //DCO在800KHZ左右
 91   do
 92   {
 93     IFG1 &= ~OFIFG;
 94     for(int i=0;i<100;i++)
 95       _NOP();
 96   }while((IFG1 & OFIFG)!=0);
 97   IFG1 &= ~OFIFG;
 98 }
 99 
100 void delay(int i)
101 {
102   while(i--);
103 }