标签：
1.设置开机启动
If you want Docker to start at boot, you should also:
$ sudo systemctl enable docker
2. 启动，停止，重启
$ sudo systemctl start docker
$ sudo systemctl stop docker
$ sudo systemctl restart docker
3.开启本地和远程
修改/etc/sysconfig/docker文件，替换
-H fd://为
-H unix:///var/run/docker.sock -H 0.0.0.0:2376
4.boot2docker启动参数
/usr/local/bin/docker -d -D -g /var/lib/docker -H unix:// -H tcp://0.0.0.0:2376 --tlsverify --tlscacert=/var/lib/boot2docker/tls/ca.pem --tlscert=/var/lib/
5. 确认docker启动
Verify that the docker daemon is running as specified with the ps command.
$ ps aux | grep docker | grep -v grep
After successfully installing Docker, the docker daemon runs with its default configuration.
In a production environment, system administrators typically configure the dockerdaemon to start and stop according to an organization’s requirements. In most cases, the system administrator configures a process manager such as SysVinit, Upstart, or systemd to manage the docker daemon’s start and stop.
The docker daemon can be run directly using the -d option. By default it listens on the Unix socket unix:///var/run/docker.sock
$ docker -d
INFO[0000] +job init_networkdriver()
INFO[0000] +job serveapi(unix:///var/run/docker.sock)
INFO[0000] Listening for HTTP on unix (/var/run/docker.sock)
...
...
If you’re running the docker daemon directly by running docker -d instead of using a process manager, you can append the configuration options to the dockerrun command directly. Just like the -d option, other options can be passed to the docker daemon to configure it.
Some of the daemon’s options are:
| Flag | Description |
|---|---|
-D, --debug=false |
Enable or disable debug mode. By default, this is false. |
-H,--host=[] |
Daemon socket(s) to connect to. |
--tls=false |
Enable or disable TLS. By default, this is false. |
Here is a an example of running the docker daemon with configuration options:
$ docker -d -D --tls=true --tlscert=/var/docker/server.pem --tlskey=/var/docker/serverkey.pem -H tcp://192.168.59.3:2376
These options :
-D (debug) modetls to true with the server certificate and key specified using --tlscert and --tlskey respectivelytcp://192.168.59.3:2376
The command line reference has the complete list of daemon flags with explanations.
As of 14.04, Ubuntu uses Upstart as a process manager. By default, Upstart jobs are located in /etc/init and the docker Upstart job can be found at /etc/init/docker.conf.
After successfully installing Docker for Ubuntu, you can check the running status using Upstart in this way:
$ sudo status docker
docker start/running, process 989
You can start/stop/restart the docker daemon using
$ sudo start docker
$ sudo stop docker
$ sudo restart docker
You configure the docker daemon in the /etc/default/docker file on your system. You do this by specifying values in a DOCKER_OPTS variable.
To configure Docker options:
Log into your host as a user with sudo or root privileges.
If you don’t have one, create the /etc/default/docker file on your host. Depending on how you installed Docker, you may already have this file.
Open the file with your favorite editor.
$ sudo vi /etc/default/docker
Add a DOCKER_OPTS variable with the following options. These options are appended to the docker daemon’s run command.
DOCKER_OPTS="-D --tls=true --tlscert=/var/docker/server.pem --tlskey=/var/docker/serverkey.pem -H tcp://192.168.59.3:2376"
These options :
-D (debug) modetls to true with the server certificate and key specified using --tlscert and --tlskey respectivelytcp://192.168.59.3:2376
The command line reference has the complete list of daemon flags with explanations.
Save and close the file.
Restart the docker daemon.
$ sudo restart docker
Verify that the docker daemon is running as specified with the ps command.
$ ps aux | grep docker | grep -v grep
By default logs for Upstart jobs are located in /var/log/upstart and the logs for docker daemon can be located at /var/log/upstart/docker.log
$ tail -f /var/log/upstart/docker.log
INFO[0000] Loading containers: done.
INFO[0000] docker daemon: 1.6.0 4749651; execdriver: native-0.2; graphdriver: aufs
INFO[0000] +job acceptconnections()
INFO[0000] -job acceptconnections() = OK (0)
INFO[0000] Daemon has completed initialization
As of 7.x, CentOS and RHEL use systemd as the process manager. As of 21, Fedora uses systemd as its process manager.
After successfully installing Docker for CentOS/Red Hat Enterprise Linux/Fedora, you can check the running status in this way:
$ sudo systemctl status docker
You can start/stop/restart the docker daemon using
$ sudo systemctl start docker
$ sudo systemctl stop docker
$ sudo systemctl restart docker
If you want Docker to start at boot, you should also:
$ sudo systemctl enable docker
You configure the docker daemon in the /etc/sysconfig/docker file on your host. You do this by specifying values in a variable. For CentOS 7.x and RHEL 7.x, the name of the variable is OPTIONS and for CentOS 6.x and RHEL 6.x, the name of the variable is other_args. For this section, we will use CentOS 7.x as an example to configure the docker daemon.
By default, systemd services are located either in /etc/systemd/service, /lib/systemd/system or /usr/lib/systemd/system. The docker.service file can be found in either of these three directories depending on your host.
To configure Docker options:
Log into your host as a user with sudo or root privileges.
If you don’t have one, create the /etc/sysconfig/docker file on your host. Depending on how you installed Docker, you may already have this file.
Open the file with your favorite editor.
$ sudo vi /etc/sysconfig/docker
Add a OPTIONS variable with the following options. These options are appended to the command that starts the docker daemon.
OPTIONS="-D --tls=true --tlscert=/var/docker/server.pem --tlskey=/var/docker/serverkey.pem -H tcp://192.168.59.3:2376"
These options :
-D (debug) modetls to true with the server certificate and key specified using --tlscert and --tlskey respectivelytcp://192.168.59.3:2376
The command line reference has the complete list of daemon flags with explanations.
Save and close the file.
Restart the docker daemon.
$ sudo service docker restart
Verify that the docker daemon is running as specified with the ps command.
$ ps aux | grep docker | grep -v grep
systemd has its own logging system called the journal. The logs for the dockerdaemon can be viewed using journalctl -u docker
$ sudo journalctl -u docker
May 06 00:22:05 localhost.localdomain systemd[1]: Starting Docker Application Container Engine...
May 06 00:22:05 localhost.localdomain docker[2495]: time="2015-05-06T00:22:05Z" level="info" msg="+job serveapi(unix:///var/run/docker.sock)"
May 06 00:22:05 localhost.localdomain docker[2495]: time="2015-05-06T00:22:05Z" level="info" msg="Listening for HTTP on unix (/var/run/docker.sock)"
May 06 00:22:06 localhost.localdomain docker[2495]: time="2015-05-06T00:22:06Z" level="info" msg="+job init_networkdriver()"
May 06 00:22:06 localhost.localdomain docker[2495]: time="2015-05-06T00:22:06Z" level="info" msg="-job init_networkdriver() = OK (0)"
May 06 00:22:06 localhost.localdomain docker[2495]: time="2015-05-06T00:22:06Z" level="info" msg="Loading containers: start."
May 06 00:22:06 localhost.localdomain docker[2495]: time="2015-05-06T00:22:06Z" level="info" msg="Loading containers: done."
May 06 00:22:06 localhost.localdomain docker[2495]: time="2015-05-06T00:22:06Z" level="info" msg="docker daemon: 1.5.0-dev fc0329b/1.5.0; execdriver: native-0.2; graphdriver: devicemapper"
May 06 00:22:06 localhost.localdomain docker[2495]: time="2015-05-06T00:22:06Z" level="info" msg="+job acceptconnections()"
May 06 00:22:06 localhost.localdomain docker[2495]: time="2015-05-06T00:22:06Z" level="info" msg="-job acceptconnections() = OK (0)"
Note: Using and configuring journal is an advanced topic and is beyond the scope of this article.
标签：
原文地址：http://www.cnblogs.com/yaoliang11/p/4626872.html
