KVM虚拟机IO处理过程(二) ----QEMU/KVM I/O 处理过程

时间：2015-07-30 21:14:05 阅读：652 评论：0 收藏：0 [点我收藏+]

标签：

接着KVM虚拟机IO处理过程中Guest Vm IO处理过程(http://blog.csdn.net/dashulu/article/details/16820281),本篇文章主要描述IO从guest vm跳转到kvm和qemu后的处理过程.

首先回顾一下kvm的启动过程(http://blog.csdn.net/dashulu/article/details/17074675).qemu通过调用kvm提供的一系列接口来启动kvm. qemu的入口为vl.c中的main函数,main函数通过调用kvm_init 和 machine->init来初始化kvm. 其中, machine->init会创建vcpu, 用一个线程去模拟vcpu, 该线程执行的函数为qemu_kvm_cpu_thread_fn, 并且该线程最终kvm_cpu_exec,该函数调用kvm_vcpu_ioctl切换到kvm中,下次从kvm中返回时,会接着执行kvm_vcpu_ioctl之后的代码,判断exit_reason,然后进行相应处理.

[cpp] view plain copy

int kvm_cpu_exec(CPUState *cpu)
{
struct kvm_run *run = cpu->kvm_run;
int ret, run_ret;
DPRINTF("kvm_cpu_exec()\n");
if (kvm_arch_process_async_events(cpu)) {
cpu->exit_request = 0;
return EXCP_HLT;
}
do {
if (cpu->kvm_vcpu_dirty) {
kvm_arch_put_registers(cpu, KVM_PUT_RUNTIME_STATE);
cpu->kvm_vcpu_dirty = false;
}
kvm_arch_pre_run(cpu, run);
if (cpu->exit_request) {
DPRINTF("interrupt exit requested\n");
/*
* KVM requires us to reenter the kernel after IO exits to complete
* instruction emulation. This self-signal will ensure that we
* leave ASAP again.
*/
qemu_cpu_kick_self();
}
qemu_mutex_unlock_iothread();
run_ret = kvm_vcpu_ioctl(cpu, KVM_RUN, 0);
qemu_mutex_lock_iothread();
kvm_arch_post_run(cpu, run);
if (run_ret < 0) {
if (run_ret == -EINTR || run_ret == -EAGAIN) {
DPRINTF("io window exit\n");
ret = EXCP_INTERRUPT;
break;
}
fprintf(stderr, "error: kvm run failed %s\n",
strerror(-run_ret));
abort();
}
trace_kvm_run_exit(cpu->cpu_index, run->exit_reason);
switch (run->exit_reason) {
case KVM_EXIT_IO:
DPRINTF("handle_io\n");
kvm_handle_io(run->io.port,
(uint8_t *)run + run->io.data_offset,
run->io.direction,
run->io.size,
run->io.count);
ret = 0;
break;
case KVM_EXIT_MMIO:
DPRINTF("handle_mmio\n");
cpu_physical_memory_rw(run->mmio.phys_addr,
run->mmio.data,
run->mmio.len,
run->mmio.is_write);
ret = 0;
break;
case KVM_EXIT_IRQ_WINDOW_OPEN:
DPRINTF("irq_window_open\n");
ret = EXCP_INTERRUPT;
break;
case KVM_EXIT_SHUTDOWN:
DPRINTF("shutdown\n");
qemu_system_reset_request();
ret = EXCP_INTERRUPT;
break;
case KVM_EXIT_UNKNOWN:
fprintf(stderr, "KVM: unknown exit, hardware reason %" PRIx64 "\n",
(uint64_t)run->hw.hardware_exit_reason);
ret = -1;
break;
case KVM_EXIT_INTERNAL_ERROR:
ret = kvm_handle_internal_error(cpu, run);
break;
default:
DPRINTF("kvm_arch_handle_exit\n");
ret = kvm_arch_handle_exit(cpu, run);
break;
}
} while (ret == 0);
if (ret < 0) {
cpu_dump_state(cpu, stderr, fprintf, CPU_DUMP_CODE);
vm_stop(RUN_STATE_INTERNAL_ERROR);
}
cpu->exit_request = 0;
return ret;
}

kvm_vcpu_ioctl执行时,调用的kvm函数是virt/kvm/kvm-main.c中的kvm_vcpu_ioctl.c函数.当传入参数为KVM_RUN时,最终会调用到vcpu_enter_guest函数, vcpu_enter_guest函数中调用了kvm_x86_ops->run(vcpu),在intel处理器架构中该函数对应的实现为vmx_vcpu_run, vmx_vcpu_run设置好寄存器状态之后调用VM_LAUNCH或者VM_RESUME进入guest vm, 一旦发生vm exit则从此处继续执行下去.

[cpp] view plain copy

static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
unsigned long debugctlmsr;
/*...此处省略n行代码...*/
vmx->__launched = vmx->loaded_vmcs->launched;
asm(
/* Store host registers */
"push %%" _ASM_DX "; push %%" _ASM_BP ";"
"push %%" _ASM_CX " \n\t" /* placeholder for guest rcx */
"push %%" _ASM_CX " \n\t"
"cmp %%" _ASM_SP ", %c[host_rsp](%0) \n\t"
"je 1f \n\t"
"mov %%" _ASM_SP ", %c[host_rsp](%0) \n\t"
__ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
"1: \n\t"
/* Reload cr2 if changed */
"mov %c[cr2](%0), %%" _ASM_AX " \n\t"
"mov %%cr2, %%" _ASM_DX " \n\t"
"cmp %%" _ASM_AX ", %%" _ASM_DX " \n\t"
"je 2f \n\t"
"mov %%" _ASM_AX", %%cr2 \n\t"
"2: \n\t"
/* Check if vmlaunch of vmresume is needed */
"cmpl $0, %c[launched](%0) \n\t"
/* Load guest registers. Don‘t clobber flags. */
"mov %c[rax](%0), %%" _ASM_AX " \n\t"
"mov %c[rbx](%0), %%" _ASM_BX " \n\t"
"mov %c[rdx](%0), %%" _ASM_DX " \n\t"
"mov %c[rsi](%0), %%" _ASM_SI " \n\t"
"mov %c[rdi](%0), %%" _ASM_DI " \n\t"
"mov %c[rbp](%0), %%" _ASM_BP " \n\t"
#ifdef CONFIG_X86_64
"mov %c[r8](%0), %%r8 \n\t"
"mov %c[r9](%0), %%r9 \n\t"
"mov %c[r10](%0), %%r10 \n\t"
"mov %c[r11](%0), %%r11 \n\t"
"mov %c[r12](%0), %%r12 \n\t"
"mov %c[r13](%0), %%r13 \n\t"
"mov %c[r14](%0), %%r14 \n\t"
"mov %c[r15](%0), %%r15 \n\t"
#endif
"mov %c[rcx](%0), %%" _ASM_CX " \n\t" /* kills %0 (ecx) */
/* Enter guest mode */
"jne 1f \n\t"
__ex(ASM_VMX_VMLAUNCH) "\n\t"
"jmp 2f \n\t"
"1: " __ex(ASM_VMX_VMRESUME) "\n\t"
"2: "
/* Save guest registers, load host registers, keep flags */
"mov %0, %c[wordsize](%%" _ASM_SP ") \n\t"
"pop %0 \n\t"
"mov %%" _ASM_AX ", %c[rax](%0) \n\t"
"mov %%" _ASM_BX ", %c[rbx](%0) \n\t"
__ASM_SIZE(pop) " %c[rcx](%0) \n\t"
"mov %%" _ASM_DX ", %c[rdx](%0) \n\t"
"mov %%" _ASM_SI ", %c[rsi](%0) \n\t"
"mov %%" _ASM_DI ", %c[rdi](%0) \n\t"
"mov %%" _ASM_BP ", %c[rbp](%0) \n\t"
#ifdef CONFIG_X86_64
"mov %%r8, %c[r8](%0) \n\t"
"mov %%r9, %c[r9](%0) \n\t"
"mov %%r10, %c[r10](%0) \n\t"
"mov %%r11, %c[r11](%0) \n\t"
"mov %%r12, %c[r12](%0) \n\t"
"mov %%r13, %c[r13](%0) \n\t"
"mov %%r14, %c[r14](%0) \n\t"
"mov %%r15, %c[r15](%0) \n\t"
#endif
"mov %%cr2, %%" _ASM_AX " \n\t"
"mov %%" _ASM_AX ", %c[cr2](%0) \n\t"
"pop %%" _ASM_BP "; pop %%" _ASM_DX " \n\t"
"setbe %c[fail](%0) \n\t"
".pushsection .rodata \n\t"
".global vmx_return \n\t"
"vmx_return: " _ASM_PTR " 2b \n\t"
".popsection"
: : "c"(vmx), "d"((unsigned long)HOST_RSP),
[launched]"i"(offsetof(struct vcpu_vmx, __launched)),
[fail]"i"(offsetof(struct vcpu_vmx, fail)),
[host_rsp]"i"(offsetof(struct vcpu_vmx, host_rsp)),
[rax]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RAX])),
[rbx]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RBX])),
[rcx]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RCX])),
[rdx]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RDX])),
[rsi]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RSI])),
[rdi]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RDI])),
[rbp]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_RBP])),
#ifdef CONFIG_X86_64
[r8]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_R8])),
[r9]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_R9])),
[r10]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_R10])),
[r11]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_R11])),
[r12]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_R12])),
[r13]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_R13])),
[r14]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_R14])),
[r15]"i"(offsetof(struct vcpu_vmx, vcpu.arch.regs[VCPU_REGS_R15])),
#endif
[cr2]"i"(offsetof(struct vcpu_vmx, vcpu.arch.cr2)),
[wordsize]"i"(sizeof(ulong))
: "cc", "memory"
#ifdef CONFIG_X86_64
, "rax", "rbx", "rdi", "rsi"
, "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15"
#else
, "eax", "ebx", "edi", "esi"
#endif
);
/* MSR_IA32_DEBUGCTLMSR is zeroed on vmexit. Restore it if needed */
if (debugctlmsr)
update_debugctlmsr(debugctlmsr);
#ifndef CONFIG_X86_64
/*
* The sysexit path does not restore ds/es, so we must set them to
* a reasonable value ourselves.
*
* We can‘t defer this to vmx_load_host_state() since that function
* may be executed in interrupt context, which saves and restore segments
* around it, nullifying its effect.
*/
loadsegment(ds, __USER_DS);
loadsegment(es, __USER_DS);
#endif
vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP)
| (1 << VCPU_EXREG_RFLAGS)
| (1 << VCPU_EXREG_CPL)
| (1 << VCPU_EXREG_PDPTR)
| (1 << VCPU_EXREG_SEGMENTS)
| (1 << VCPU_EXREG_CR3));
vcpu->arch.regs_dirty = 0;
vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
if (is_guest_mode(vcpu)) {
struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
vmcs12->idt_vectoring_info_field = vmx->idt_vectoring_info;
if (vmx->idt_vectoring_info & VECTORING_INFO_VALID_MASK) {
vmcs12->idt_vectoring_error_code =
vmcs_read32(IDT_VECTORING_ERROR_CODE);
vmcs12->vm_exit_instruction_len =
vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
}
}
vmx->loaded_vmcs->launched = 1;
vmx->exit_reason = vmcs_read32(VM_EXIT_REASON);
trace_kvm_exit(vmx->exit_reason, vcpu, KVM_ISA_VMX);
vmx_complete_atomic_exit(vmx);
vmx_recover_nmi_blocking(vmx);
vmx_complete_interrupts(vmx);
}

介绍完初始化的流程,可以介绍IO在kvm和qemu中的处理流程了. 当Guest Vm进行IO操作需要访问设备时,就会触发vm exit 返回到vmx_vcpu_run, vmx保存好vmcs并且记录下VM_ExIT_REASON后返回到调用该函数的vcpu_enter_guest, 在vcpu_enter_guest函数末尾调用了r = kvm_x86_ops->handle_exit(vcpu), 该函数对应于vmx_handle_exit函数(intel cpu架构对应关系可以查看vmx.c文件中static struct kvm_x86_ops vmx_x86_ops), vmx_handle_exit 调用kvm_vmx_exit_handlers[exit_reason](vcpu),该语句根据exit_reason调用不同的函数,该数据结构定义如下:

[cpp] view plain copy

static int (*const kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
[EXIT_REASON_EXCEPTION_NMI] = handle_exception,
[EXIT_REASON_EXTERNAL_INTERRUPT] = handle_external_interrupt,
[EXIT_REASON_TRIPLE_FAULT] = handle_triple_fault,
[EXIT_REASON_NMI_WINDOW] = handle_nmi_window,
[EXIT_REASON_IO_INSTRUCTION] = handle_io,
[EXIT_REASON_CR_ACCESS] = handle_cr,
[EXIT_REASON_DR_ACCESS] = handle_dr,
[EXIT_REASON_CPUID] = handle_cpuid,
[EXIT_REASON_MSR_READ] = handle_rdmsr,
[EXIT_REASON_MSR_WRITE] = handle_wrmsr,
[EXIT_REASON_PENDING_INTERRUPT] = handle_interrupt_window,
[EXIT_REASON_HLT] = handle_halt,
[EXIT_REASON_INVD] = handle_invd,
[EXIT_REASON_INVLPG] = handle_invlpg,
[EXIT_REASON_RDPMC] = handle_rdpmc,
[EXIT_REASON_VMCALL] = handle_vmcall,
[EXIT_REASON_VMCLEAR] = handle_vmclear,
[EXIT_REASON_VMLAUNCH] = handle_vmlaunch,
[EXIT_REASON_VMPTRLD] = handle_vmptrld,
[EXIT_REASON_VMPTRST] = handle_vmptrst,
[EXIT_REASON_VMREAD] = handle_vmread,
[EXIT_REASON_VMRESUME] = handle_vmresume,
[EXIT_REASON_VMWRITE] = handle_vmwrite,
[EXIT_REASON_VMOFF] = handle_vmoff,
[EXIT_REASON_VMON] = handle_vmon,
[EXIT_REASON_TPR_BELOW_THRESHOLD] = handle_tpr_below_threshold,
[EXIT_REASON_APIC_ACCESS] = handle_apic_access,
[EXIT_REASON_WBINVD] = handle_wbinvd,
[EXIT_REASON_XSETBV] = handle_xsetbv,
[EXIT_REASON_TASK_SWITCH] = handle_task_switch,
[EXIT_REASON_MCE_DURING_VMENTRY] = handle_machine_check,
[EXIT_REASON_EPT_VIOLATION] = handle_ept_violation,
[EXIT_REASON_EPT_MISCONFIG] = handle_ept_misconfig,
[EXIT_REASON_PAUSE_INSTRUCTION] = handle_pause,
[EXIT_REASON_MWAIT_INSTRUCTION] = handle_invalid_op,
[EXIT_REASON_MONITOR_INSTRUCTION] = handle_invalid_op,
};

如果是因为IO原因导致的vm exit,则调用的处理函数为handle_io,handle_io的处理可以查看(http://blog.csdn.net/fanwenyi/article/details/12748613), 该过程结束之后需要qemu去处理IO,这时候会返回到qemu, 在kvm_cpu_exec中继续执行下去,看上面kvm_cpu_exec的代码,如果是因为IO原因返回到qemu,会调用kvm_handle_io函数.

[cpp] view plain copy