# 立即重新启动计算机
echo "b" > /proc/sysrq-trigger
# 立即关闭计算机
echo "o" > /proc/sysrq-trigger
# 导出内存分配的信息 （可以用/var/log/message 查看）
echo "m" > /proc/sysrq-trigger
# 导出当前CPU寄存器信息和标志位的信息
echo "p" > /proc/sysrq-trigger
# 导出线程状态信息
echo "t" > /proc/sysrq-trigger
# 故意让系统崩溃
echo "c" > /proc/sysrq-trigger
# 立即重新挂载所有的文件系统
echo "s" > /proc/sysrq-trigger
# 立即重新挂载所有的文件系统为只读
echo "u" > /proc/sysrq-trigger
Documentation for sysrq.c
Based on kernel version 2.6.38. Page generated on 2011-03-22 22:20 EST.
1 Linux Magic System Request Key Hacks
2 Documentation for sysrq.c
3
4 * What is the magic SysRq key?
5 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
6 It is a ‘magical‘ key combo you can hit which the kernel will respond to
7 regardless of whatever else it is doing, unless it is completely locked up.
8
9 * How do I enable the magic SysRq key?
10 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
11 You need to say "yes" to ‘Magic SysRq key (CONFIG_MAGIC_SYSRQ)‘ when
12 configuring the kernel. When running a kernel with SysRq compiled in,
13 /proc/sys/kernel/sysrq controls the functions allowed to be invoked via
14 the SysRq key. By default the file contains 1 which means that every
15 possible SysRq request is allowed (in older versions SysRq was disabled
16 by default, and you were required to specifically enable it at run-time
17 but this is not the case any more). Here is the list of possible values
18 in /proc/sys/kernel/sysrq:
19 0 - disable sysrq completely
20 1 - enable all functions of sysrq
21 >1 - bitmask of allowed sysrq functions (see below for detailed function
22 description):
23 2 - enable control of console logging level
24 4 - enable control of keyboard (SAK, unraw)
25 8 - enable debugging dumps of processes etc.
26 16 - enable sync command
27 32 - enable remount read-only
28 64 - enable signalling of processes (term, kill, oom-kill)
29 128 - allow reboot/poweroff
30 256 - allow nicing of all RT tasks
31
32 You can set the value in the file by the following command:
33 echo "number" >/proc/sys/kernel/sysrq
34
35 Note that the value of /proc/sys/kernel/sysrq influences only the invocation
36 via a keyboard. Invocation of any operation via /proc/sysrq-trigger is always
37 allowed (by a user with admin privileges).
38
39 * How do I use the magic SysRq key?
40 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
41 On x86 - You press the key combo ‘ALT-SysRq-<command key>‘. Note - Some
42 keyboards may not have a key labeled ‘SysRq‘. The ‘SysRq‘ key is
43 also known as the ‘Print Screen‘ key. Also some keyboards cannot
44 handle so many keys being pressed at the same time, so you might
45 have better luck with "press Alt", "press SysRq", "release SysRq",
46 "press <command key>", release everything.
47
48 On SPARC - You press ‘ALT-STOP-<command key>‘, I believe.
49
50 On the serial console (PC style standard serial ports only) -
51 You send a BREAK, then within 5 seconds a command key. Sending
52 BREAK twice is interpreted as a normal BREAK.
53
54 On PowerPC - Press ‘ALT - Print Screen (or F13) - <command key>,
55 Print Screen (or F13) - <command key> may suffice.
56
57 On other - If you know of the key combos for other architectures, please
58 let me know so I can add them to this section.
59
60 On all - write a character to /proc/sysrq-trigger. e.g.:
61
62 echo t > /proc/sysrq-trigger
63
64 * What are the ‘command‘ keys?
65 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
66 ‘b‘ - Will immediately reboot the system without syncing or unmounting
67 your disks.
68
69 ‘c‘ - Will perform a system crash by a NULL pointer dereference.
# 立即重新启动计算机
echo "b" > /proc/sysrq-trigger
# 立即关闭计算机
echo "o" > /proc/sysrq-trigger
# 导出内存分配的信息 （可以用/var/log/message 查看）
echo "m" > /proc/sysrq-trigger
# 导出当前CPU寄存器信息和标志位的信息
echo "p" > /proc/sysrq-trigger
# 导出线程状态信息
echo "t" > /proc/sysrq-trigger
# 故意让系统崩溃
echo "c" > /proc/sysrq-trigger
# 立即重新挂载所有的文件系统
echo "s" > /proc/sysrq-trigger
# 立即重新挂载所有的文件系统为只读
echo "u" > /proc/sysrq-trigger
http://tech.ddvip.com/2013-04/1365945351193575.html
/proc/sysrq-trigger详解,布布扣,bubuko.com
原文地址：http://www.cnblogs.com/xu-neal/p/3835705.html
