标签：
I‘ve got a -95 W124 and would like to connect my Star diagnosis SD Connect4 to it. But I do not know how to connect the wires from the SDconnect c4 mux?
The Black plug is of course ground, which will go in pos 1 on the Data Link
The White plug is marked KL15 which I understand is going to pos 16..?
The red plug is marked 12V B+, don‘t know where this goes.
The blue plug is marked K-Line/LIN, don‘t know where this goes.
There is to groups of plugs with two plugs in each. One Green and one
yellow. One group is marked CAN HS and one is marked CAN LS. The green
plug in each group is marked CAN_L and the yellow is marked CAN_H.
Solution:
Here is the solution I found on a forum. I have tried it successfully as follows:
Connect Red to +12v battery directly, White to pin 16, Black to pin 1,
and Yellow to pin 8 (some motors like M111 series) to get HFM error and
live data, Pin 7 for HVAC, Pin 6 for airbag etc.
Result:
After trial and error a gazillion times, this is what we ended up with, and the software actually responds!!
So
it seems the BLUE jack, marked K-Line, is the one you‘ll have to move
from pin to pin according to the software‘s instructions. Mission
accomplished!:-)
Hope it helps you out also.
How to Connect the Wires from MB SD Connect Compact 4 MUX?
标签：
原文地址：http://www.cnblogs.com/carobd2/p/4720073.html
