You have just been put in charge of developing a new shredder for the Shredding Company Although a "normal" shredder would just shred sheets of paper into little pieces so that the contents would become unreadable, this new shredder needs to have the following unusual basic characteristics.
1.The shredder takes as input a target number and a sheet of paper with a number written on it.
2.It shreds (or cuts) the sheet into pieces each of which has one or more digits on it.
3.The sum of the numbers written on each piece is the closest possible number to the target number, without going over it.
For example, suppose that the target number is 50, and the sheet of
paper has the number 12346. The shredder would cut the sheet into four
pieces, where one piece has 1, another has 2, the third has 34, and the
fourth has 6. This is because their sum 43 (= 1 + 2 + 34 + 6) is closest
to the target number 50 of all possible combinations without going over
50. For example, a combination where the pieces are 1, 23, 4, and 6 is
not valid, because the sum of this combination 34 (= 1 + 23 + 4 + 6) is
less than the above combination‘s 43. The combination of 12, 34, and 6
is not valid either, because the sum 52 (= 12 + 34 + 6) is greater than
the target number of 50.
Figure 1. Shredding a sheet of paper having the number 12346 when the target number is 50
There are also three special rules :
1.If the target number is the same as the number on the sheet of paper, then the paper is not cut.
For example, if the target number is 100 and the number on the sheet of paper is also 100, then
the paper is not cut.
2.If it is not possible to make any combination whose sum is less
than or equal to the target number, then error is printed on a display.
For example, if the target number is 1 and the number on the sheet of
paper is 123, it is not possible to make any valid combination, as the
combination with the smallest possible sum is 1, 2, 3. The sum for this
combination is 6, which is greater than the target number, and thus
error is printed.
3.If there is more than one possible combination where the sum is
closest to the target number without going over it, then rejected is
printed on a display. For example, if the target number is 15, and the
number on the sheet of paper is 111, then there are two possible
combinations with the highest possible sum of 12: (a) 1 and 11 and (b)
11 and 1; thus rejected is printed. In order to develop such a shredder,
you have decided to first make a simple program that would simulate the
above characteristics and rules. Given two numbers, where the first is
the target number and the second is the number on the sheet of paper to
be shredded, you need to figure out how the shredder should "cut up" the
second number.
For each test case in the input, the corresponding output takes one of the following three types :
sum part1 part2 ...
rejected
error
In the first type, partj and sum have the following meaning :
1.Each partj is a number on one piece of shredded paper. The order
of partj corresponds to the order of the original digits on the sheet of
paper.
2.sum is the sum of the numbers after being shredded, i.e., sum = part1 + part2 +...
Each number should be separated by one space.
The message error is printed if it is not possible to make any combination, and rejected if there is
more than one possible combination.
No extra characters including spaces are allowed at the beginning of each line, nor at the end of each line.