码迷,mamicode.com
首页 >  
搜索关键字:uimage    ( 102个结果
LCD驱动 15-3
测试:1:make menuconfig去掉原来的驱动程序 Device Drivers ---> Graphics support ---> <M> S3C2410 LCD framebuffer support 2: make uImage make modules cp arch/arm/bo
分类:其他好文   时间:2016-01-30 02:39:24    阅读次数:175
TFTP服务
$ mkdir /tftpboot$ cp exynos4412-fs4412.dtb uImage /tftpboot$ sudo chmod 777 tftpboot(~下)$ sudo chmod 777 tftpboot/*$ sudo vim /etc/default/tftpd-hpa....
分类:其他好文   时间:2016-01-24 00:25:48    阅读次数:268
linux内核启动笔记
一、 1、解压 tar xjf linux-2.6.22.6.tar.bz22、打补丁 patch -p1 yyy.komake uImage 时 a..config-->autoconf.h b..config-->auto.conf分析Makefile:第一个文件、链接脚本a.c b.c 组成一...
分类:系统相关   时间:2015-12-25 22:27:10    阅读次数:322
[国嵌攻略][069][Bootm命令移植]
Bootloader作用1.初始化软硬件2.启动操作系统内核分类1.zImage 不加信息头的内核2.uImage 加信息头后的内核,用bootm命令来启动bootm作用1.检测信息头:压缩、操作系统、幻数2.根据OS信息调用相应的处理函数:获取内核地址、知道CPU型号、设置启动参数代码编写1.获取...
分类:其他好文   时间:2015-12-07 12:05:41    阅读次数:196
[OrangePi] Features (the features of Loboris's Images)
boot0_sdcard.fex, u-boot.fex and kernel (uImage) created from sourceskernel built with many features enabled (btrfs, USB serial adapters, bluetooth, h...
分类:其他好文   时间:2015-10-23 10:17:35    阅读次数:228
[OrangePi] If you are using an older image
Download scriptbin_kernel.tar.gz from Mega, unpack.Copy uImage_OPI-2 or uImage_OPI-PLUS (depending on your board type) to uImage on SD Card FAT partit...
分类:其他好文   时间:2015-10-23 10:09:59    阅读次数:172
Image zImage uImage
内核编译(make)之后会生成两个文件,一个Image,一个zImage,其中Image为内核映像文件,而zImage为内核的一种映像压缩文件,Image大约为4M,而zImage不到2M。 那么uImage又是什么的?它是uboot专用的映像文件,它是在zImage之前加上一个长度为64字节...
分类:其他好文   时间:2015-10-15 11:18:13    阅读次数:241
I.MX6 Linux U-boot 环境变量解析
在分析完I.MX6 Manufacturing Tool V2 (MFGTool2)中一些内容之后,这里仅仅是为了验证其中的一些想法: 1. 如何读取不在分区中的uImage,而是在emmc中1M地址上的uImage; 2. U-boot的loadaddr是否是0x10800000,因为ucl2...
分类:系统相关   时间:2015-10-14 11:48:21    阅读次数:263
Linux内核和根文件系统引导加载程序
续博文《u-boot之u-boot-2009.11启动过程分析》Linux内核启动及文件系统载入过程当u-boot開始运行bootcmd命令。就进入Linux内核启动阶段,与u-boot类似,普通Linux内核的启动过程也能够分为两个阶段,但针对压缩了的内核如uImage就要包含内核自解压过程了。本...
分类:系统相关   时间:2015-09-11 20:38:20    阅读次数:802
I.MX6 SABRE SD L3.0.35
1). copy u-boot sudo dd if=u-boot-mx6q-sabresd.bin of=/dev/sdb bs=512 seek=2 skip=2 conv=fsync 2). copy uImage sudo dd if=uImage of=/dev/sdb bs=512 seek=2048 conv=fsync 3). copy rootfs 4). run boot...
分类:其他好文   时间:2015-09-10 13:20:23    阅读次数:234
102条   上一页 1 ... 4 5 6 7 8 ... 11 下一页
© 2014 mamicode.com 版权所有  联系我们:gaon5@hotmail.com
迷上了代码!